• There are no items in your cart

ASTM G 155 : 2013 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
Available format(s)

PDF

Superseded date

09-25-2021

Language(s)

English

Published date

06-01-2013

CONTAINED IN VOL. 14.04, 2015 Defines the basic principles and operating procedures for using xenon arc light and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual use.

1.1This practice covers the basic principles and operating procedures for using xenon arc light and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual use. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure. A number of exposure procedures are listed in an appendix; however, this practice does not specify the exposure conditions best suited for the material to be tested.

Note 1Practice G151 describes performance criteria for all exposure devices that use laboratory light sources. This practice replaces Practice G26, which describes very specific designs for devices used for xenon-arc exposures. The apparatus described in Practice G26 is covered by this practice.

1.2Test specimens are exposed to filtered xenon arc light under controlled environmental conditions. Different types of xenon arc light sources and different filter combinations are described.

1.3Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G151 and ISO 4892-1. More specific information about methods for determining the change in properties after exposure and reporting these results is described in Practice D5870.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5.1Should any ozone be generated from the operation of the lamp(s), it shall be carried away from the test specimens and operating personnel by an exhaust system.

1.6This practice is technically similar to the following ISO documents: ISO 4892-2, ISO 11341, ISO 105 B02, ISO 105 B04, ISO 105 B05, and ISO 105 B06.

Committee
G 03
DevelopmentNote
Supersedes ASTM G26. (10/2000)
DocumentType
Redline
Pages
14
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

CSA C83 : 2017 COMMUNICATION AND POWER LINE HARDWARE
MIL-PRF-32239 Revision A:2014 COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS
CSA C22.2 No. 89 : 2015 SWIMMING-POOL LUMINAIRES, SUBMERSIBLE LUMINAIRES, AND ACCESSORIES
ASTM G 141 : 2009 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
ASTM D 4811/D4811M : 2016 : REDLINE Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
11/30229694 DC : 0 BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
ASTM D 5071 : 2006 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D 6901 : 2015 Standard Specification for Artists' Colored Pencils
FM 7730 : 2014 EXPLOSION VENTING DEVICES
ISO 9370:2017 Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
BS ISO 11617:2014 Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
FM 2510 : 2014 FLOOD ABATEMENT EQUIPMENT
EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
MIL-PRF-22750 Revision G:2011 COATING, EPOXY, HIGH-SOLIDS
ASTM D 3903 : 2015 : REDLINE Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM D 4434/D4434M : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
ASTM D 4798/D4798M : 2011 : R2016 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
MIL-PRF-85322 Revision C:2014 COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION
ASTM D 1047 : 2016 : REDLINE Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
TAPPI T 578 : 2011 ACCELERATED LIGHT AGING OF PRINTING AND WRITING PAPER BY XENON-ARC EXPOSURE APPARATUS
CSA Z611 : 2002 : INC : UPD 1 : 2003 : R2012 RIOT HELMETS AND FACESHIELD PROTECTION
ASTM D 3424 : 2011 : REDLINE Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D 2219 : 2017 : REDLINE Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
CSA C411.4 : 2016 COMPOSITE SUSPENSION INSULATORS FOR OVERHEAD LINES > 75 KV
CAN/CSA-C22.2 NO. 60079-30-1:17 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
CSA C411.6 : 2011 LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV
ISO 7076-3:2016 Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
CSA C22.2 No. 2515 : 2009 : INC : UPD 2 : 2014 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
NFPA 102 : 2016 GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES
ASTM D 6789 : 2002 : EDT 1 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
SAE J 2527 : 2017 PERFORMANCE BASED STANDARD FOR ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE XENON-ARC APPARATUS
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM D 6551/D6551M : 2005 : R2019 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 6577 : 2015 : REDLINE Standard Guide for Testing Industrial Protective Coatings
ASTM D 6789 : 2002 : R2007 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus (Withdrawn 2011)
ASTM D 6754 : 2002 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM C 1442 : 2014 : REDLINE Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 750 : 2012 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM C 1519 : 2010 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1523 : 2017 : REDLINE Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM D 6662 : 2017 : REDLINE Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
ASTM D 6551/D6551M : 2005 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM G 160 : 2013-02 PRACTICE FOR EVALUATING MICROBIAL SUSCEPTIBILITY OF NONMETALLIC MATERIALS BY LABORATORY SOIL BURIAL
ASTM D 3105 : 2017 : REDLINE Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM F 1515 : 2015 : REDLINE Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM D 4303 : 2010 : R2016 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
ASTM D 6551 : 2000 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM C 1248 : 2008 : R2012 Standard Test Method for Staining of Porous Substrate by Joint Sealants
UNI EN ISO 4892-2 : 2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
NBR 7282 : 2011 HIGH-VOLTAGE FUSES - EXPULSION TYPE FUSES - REQUIREMENTS AND TEST METHODS
MIL-DTL-7788 Revision H:2011 PANELS, INFORMATION, INTEGRALLY ILLUMINATED
NBR 14566 : 2004 IN DUCT AND LASHED AERIAL DIELECTRIC OPTICAL CABLE
IPC HDBK 830 : A GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS
NACE RP 01 76 : 2003 CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
IEC TS 62788-7-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 7-2: Environmental exposures - Accelerated weathering tests of polymeric materials
DD ISO/TS 13434:2008 Geosynthetics. Guidelines for the assessment of durability
CSA C22.2 No. 42 : 2010 : INC : UPD 2 : 2016 : R201500 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
AASHTO M 181 :2010 SPECIFICATION FOR CHAIN-LINK FENCE
FM 5560 : 2017 WATER MIST SYSTEMS
11/30237817 DC : 0 BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
11/30237814 DC : 0 BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
SAE J 2412 : 2015 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus<br>
ISO 11617:2014 Buildings and civil engineering works Sealants Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
MIL-PRF-32002 Revision D:2008 COVER MATERIAL, VEHICLE, COATED TACTICAL AND COMBAT, HEAVY-DUTY, WATERPROOF
BS ISO 18930:2011 Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions
BS ISO 2135:2017 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
CSA C22.2 No. 0.3 :2009 TEST METHODS FOR ELECTRICAL WIRES AND CABLES
07/30127278 DC : 0 BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
NFPA 197 : 2018 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
IEEE 1637-2010 IEEE Guide to Select Terminations for Shielded Alternating-Current Power Cable Rated 5 kV - 46 kV
BS ISO 9370:2017 Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
C22.2 NO. 31-18 Switchgear assemblies
ASTM E 744 : 2007 : R2015 Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
ASTM D 3451 : 2006 Standard Guide for Testing Coating Powders and Powder Coatings
CSA C411.7 : 2011 : INC : UPD 2 : 2013 COMPOSITE INSULATORS FOR GUY WIRES
MIL-PRF-81352 Revision C:2005 COATINGS, AIRCRAFT TOUCH-UP
ASTM E 3119 : 2017 : EDT 1 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
CSA C22.2 No. 2515:2009 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
CSA C22.2 No. 2515 : 2009 : INC : UPD 1 : 2012 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
CEI EN 60079-30-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
AWWA C901 : 2017 POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE
ASTM D 904 : 1999 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
AWWA F101 : 2013 CONTACT-MOLDED, FIBERGLASS-REINFORCED PLASTIC WASH-WATER TROUGHS AND LAUNDERS
CSA C310 : 2009 : R2014 DISTRIBUTION CLASS POLYMERIC CUTOUTS
FM 5320 : 2013 DRY CHEMICAL EXTINGUISHING SYSTEMS
CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
ASTM E 744 : 2007 Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
CSA C22.2 No. 207 : 2015 PORTABLE AND STATIONARY ELECTRIC SIGNS AND DISPLAYS
ASTM C 1530/C1530M : 2004 : R2010 : EDT 1 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
ASTM G 178 : 2016 : REDLINE Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM D 7356 : 2007 Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
BS EN ISO 11997-2:2013 Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light
ICC IRC Code and Commentary Volume 1 : 2015 IRC® Code and Commentary, Volume 1
C22.2 NO. 83.1-07 (R2017) Electrical Metallic Tubing - Steel (Tri-National Standard, with UL 797 and NMX-J-536-ANCE-2007)
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
I.S. EN ISO 4892-2:2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARCLAMPS (ISO 4892-2:2013)
I.S. EN ISO 11997-2:2013 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
ANSI/NEMA LD 3:2005 HIGH-PRESSURE DECORATIVE LAMINATES
ANSI/NEMA C29.18:2013 American National Standard for Composite Insulators—Distribution Line Post Type
ASTM D 2565 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
FM 5970 : 2015 HEAVY DUTY MOBILE EQUIPMENT PROTECTION SYSTEMS
AASHTO M 181 : 2010 : R2015 SPECIFICATION FOR CHAIN-LINK FENCE
11/30211716 DC : 0 BS EN ISO 4892-2 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
CSA C22.2 No. 42 : 2010 : INC : UPD 1 : 2013 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
ASTM D 904 : 1999 : R2013 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM E 2785 : 2014 : REDLINE Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
ASTM D 7067 : 2005 Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014)
IEEE 532-2007 REDLINE IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
CSA C22.2 No. 45.1 :2007 ELECTRICAL RIGID METAL CONDUIT - STEEL
ASTM D 4637/D4637M : 2015 : REDLINE Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
FM 5580 : 2012 HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS
AASHTO M 268 : 2015 SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR FLAT AND VERTICAL TRAFFIC CONTROL APPLICATIONS
MIL-PRF-85285 Revision E:2012 COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT
ASTM D 3771 : 2015 : REDLINE Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
SAE AMS P 21600 : 2013 PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION
CSA Z611 : 2002 RIOT HELMETS AND FACESHIELD PROTECTION
CSA C411.6 : 2011 : R2016 LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
C22.2 NO. 18.3-12 (R2017) Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 ELECTRICAL RIGID METAL CONDUIT - STEEL
CSA C22.2 No. 45.1 : 2007 : FR ELECTRICAL RIGID METAL CONDUIT - STEEL
ASTM G 147 : 2017 : REDLINE Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
CSA C22.2 No. 0.3 : 2009 : R2014 TEST METHODS FOR ELECTRICAL WIRES AND CABLES
ASTM D 904 : 1999 : R2005 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
CSA C310 : 2009 DISTRIBUTION CLASS POLYMERIC CUTOUTS
ASTM D 6789 : 2002 : EDT 2 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
PIA-T-5038G:2019 TAPE, TEXTILE AND WEBBING, TEXTILE, REINFORCING, NYLON
ICEA S 105-692 : 2011 600 VOLT SINGLE LAYER THERMOSET INSULATED UTILITY UNDERGROUND DISTRIBUTION CABLES
BS EN 60079-30-1:2017 Explosive atmospheres Electrical resistance trace heating. General and testing requirements
ASTM C 1483/C1483M : 2017 : REDLINE Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
ASTM D 904 : 1999 : R2008 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM C 1257 : 2015 : REDLINE Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM D 3841 : 2016 : REDLINE Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
CSA C22.2 No. 211.2 : 2006 RIGID PVC (UNPLASTICIZED) CONDUIT
ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM C 1530 : 2004 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
NFPA 101 : 2018 LIFE SAFETY CODE
DIN EN ISO 11997-2:2013-12 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 IBC® Code and Commentary, Volume 2
NASA STD 6002 : 2008 APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS
CSA C22.2 No. 198.2 : 2005 SEALED WIRE CONNECTOR SYSTEMS
CSA C22.2 No. 198.2 : 2005 : R2015 SEALED WIRE CONNECTOR SYSTEMS
CSA C22.2 No. 198.2 : 2005 : R2010 SEALED WIRE CONNECTOR SYSTEMS
CSA C22.2 No. 126.2:2002 NONMETALLIC CABLE TRAY SYSTEMS
CSA C22.2 No. 83.1 : 2007 ELECTRICAL METALLIC TUBING - STEEL
CSA C22.2 No. 83.1 : 2007 : INC : UPD 1 : 2012 : R201200 ELECTRICAL METALLIC TUBING - STEEL
CSA C22.2 42.1 : 2013 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
CSA C22.2 No. 227.2.1 : 2014 LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT
CSA C22.2 No. 126.2 : 2002 : INC : UPD 1 : 2005 : R2012 NONMETALLIC CABLE TRAY SYSTEMS
CAN/CSA-C22.2 NO. 126.2-02 (R2017) Nonmetallic Cable Tray Systems (Bi-National standard, with UL 568)
UNI EN ISO 11997-2 : 2014 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
SCTE 171 : 2016 PASSIVE NETWORK DEVICE (NID) ENCLOSURE SPECIFICATION
ASTM G 141 : 2009 : R2013 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM E 3119 : 2017 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
CSA C310 : 2009 : INC : UPD 2 : 2012 DISTRIBUTION CLASS POLYMERIC CUTOUTS
16/30328596 DC : 0 BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
PIA C 8021 : C CLOTH, PARACHUTE, NYLON, CARGO AND DECELERATION
16/30353140 DC : 0 PD IEC/TS 62788-7-2 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 7-2: ENVIRONMENTAL EXPOSURES - ACCELERATED WEATHERING TESTS OF POLYMERIC MATERIALS
13/30256722 DC : 0 BS ISO 11617 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DETERMINATION OF CHANGES IN ADHESION, COHESION AND APPEARANCE OF ELASTIC WEATHERPROOFING SEALANTS AFTER EXPOSURE OF STATICALLY CURED SPECIMENS TO ARTIFICIAL WEATHERING AND MECHANICAL CYCLING
14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
CSA C22.2 No. 42 : 2010 : R2015 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
ASTM D 7465 : 2008 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
ASTM D 6754/D6754M : 2015 : REDLINE Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM D 4798/D4798M : 2011 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
SAE AMS 3143 : 2016 POWDER COATING MATERIAL
ASTM G 156 : 2017 : REDLINE Standard Practice for Selecting and Characterizing Weathering Reference Materials
16/30333706 DC : 0 BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
MIL-PRF-14105 Revision E:2011 PAINT, HEAT-RESISTING (FOR STEEL SURFACES)
UNE-EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ASTM F 2366 : 2012 : REDLINE Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
CSA C411.6 : 2011 : INC : UPD 2 : 2013 LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV
ASTM D 3451 : 2006 : R2012 Standard Guide for Testing Coating Powders and Powder Coatings
CSA C411.7 : 2011 : R2016 COMPOSITE INSULATORS FOR GUY WIRES
MIL-PRF-32233 Revision B:2015 TANKS, COLLAPSIBLE, 3,000, 10,000, 20,000, 50,000, & 210,000 U.S. GALLONS, FUEL
NFPA 409 : 2016 AIRCRAFT HANGARS
CSA C22.2 No. 21 : 2014 CORD SETS AND POWER-SUPPLY CORDS
C22.2 NO. 45.1-07 (R2017) Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007)
CSA C22.2 No. 45.1 : 2007 : INC : UPD 2 : 2014 : R201200 ELECTRICAL RIGID METAL CONDUIT - STEEL
SAE AS 5127/1 : 2014 AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS
CSA C22.2 No. 2515 : 2009 : R2014 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
SAE J 2577 : 2015 HEAVY DUTY LAMP ELECTRICAL CONNECTOR STANDARD
CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
CSA C22.2 No. 42-1 : 2013 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ISO 18930:2011 Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions
ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
ASTM C 1519 : 2010 : R2017 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 6789 : 2002 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
FM 5600 : 2013 CLEAN AGENT EXTINGUISHING SYSTEMS
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
ASTM D 2513 : 2017-01 SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS
ASTM D 7869 : 2017 : REDLINE Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
CSA C22.2 No. 227.3 : 2015 MECHANICAL PROTECTION TUBING (MPT) AND FITTINGS
DIN EN ISO 4892-2:2013-06 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
ASTM E 2136 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
UNE-EN ISO 11997-2:2014 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
ASTM E 2136 : 2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
UL 514D:2ED 2013-06 Cover Plates for Flush-Mounted Wiring Devices
ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
BS EN ISO 4892-2:2013 Plastics. Methods of exposure to laboratory light sources Xenon-arc lamps
UNE-EN ISO 4892-2:2014 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
ASTM D 2220 : 2017 : REDLINE Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
FM 5700 : 2018 EXPLOSION SUPPRESSION SYSTEMS
PREN ISO 4892-2 : DRAFT 2011 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
MIL-PRF-81904 Revision C:2011 COATING COMPOUND, THERMAL-INSULATION
CSA C22.2 No. 42 : 2010 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
CSA Z94.3 : 2015 EYE AND FACE PROTECTORS
CSA C22.2 No. 42 : 2010 : INC : UPD 3 : 2017 : R201500 GENERAL USE RECEPTACLES, ATTACHMENT PLUGS, AND SIMILAR WIRING DEVICES
MIL-PRF-32504 Base Document:2014 MODULAR LARGE AREA MAINTENANCE SHELTER (MLAMS) TYPES: AVIATION (A), VEHICLE (V), STORAGE (S)
ASTM D 6551/D6551M : 2005 : R2011 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
I.S. EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
CSA C411.5 : 2016 DEAD-END/SUSPENSION COMPOSITE INSULATORS FOR OVERHEAD LINES <= 75 KV
ASTM D 6695 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
CSA A440 : 2017 NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS
CSA C411.7 : 2011 : INC : UPD 1 : 2011 COMPOSITE INSULATORS FOR GUY WIRES
PD IEC/TS 62788-7-2:2017 Measurement procedures for materials used in photovoltaic modules Environmental exposures. Accelerated weathering tests of polymeric materials
CSA Z611 : 2002 : R2012 RIOT HELMETS AND FACESHIELD PROTECTION
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 : R2012 ELECTRICAL RIGID METAL CONDUIT - STEEL
ASTM D 5893 : 2004 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
CSA C411.7 : 2011 COMPOSITE INSULATORS FOR GUY WIRES
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
ISO 7076-2:2012 Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
CSA C22.2 No. 0.15 : 2015 ADHESIVE LABELS
CSA C22.2 NO. 42.1:13 (R2017) Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D)
IEEE 515.1-2012 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
CSA C62817 : 2015 PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS
ASTM D 6878/D6878M : 2017 : REDLINE Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
ASTM D 4956 : 2017 : REDLINE SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL
CSA C22.2 No. 2556 : 2015 WIRE AND CABLE TEST METHODS
ASTM F 668 : 2017 : REDLINE Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
ASTM D 7942 : 2015 Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
ASTM F 2947/F2947M : 2014-03 SPECIFICATION FOR 150 TO 1500 MM [6 TO 60 IN.] ANNULAR CORRUGATED PROFILE-WALL POLYETHYLENE (PE) PIPE AND FITTINGS FOR SANITARY SEWER APPLICATIONS
ASTM D 5071 : 2006 : R2013 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D 3667 : 2016 : REDLINE Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 4303 : 2010 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
ASTM C 1248 : 2008 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability
ISO 7076-4:2016 Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
ASTM C 1530/C1530M : 2004(R2014) Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
ASTM D 925 : 2014 : REDLINE Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM C 1382 : 2016 : REDLINE Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM F 1043 : 2018 : REDLINE Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
NBR 16331 : 2014 ERRATA 1 2015 TRAFFIC SAFETY - PLASTIC BARRIER FOR CHANNELING TRAFFIC

ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO 105-B06:1998 Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B04:1994 Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
SAE J 2527 : 2004 PERFORMANCE BASED STANDARD FOR ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE XENON-ARC APPARATUS
ASTM D 5870 : 2016 : REDLINE Standard Practice for Calculating Property Retention Index of Plastics
SAE J 2412 : 2015 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus<br>
ASTM D 3980 : 1988 Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998)
ISO 1134:1993 Pears — Cold storage
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
ASTM G 113 : 2016 : REDLINE Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ISO 105-B05:1993 Textiles Tests for colour fastness Part B05: Detection and assessment of photochromism
ISO 105-B02:2014 Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.