Name: ASTM G 162 : 2018
Brand: ASTM
Price: 66.00 USD

ASTM G 162 : 2018

Superseded

View Superseded by

Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils

Available format(s)

Hardcopy , PDF

Superseded date

11-18-2023

Language(s)

English

Published date

11-13-2018

Publisher

American Society for Testing and Materials

This practice covers procedures for conducting laboratory corrosion tests in soils to evaluate the corrosive attack on engineering materials.

1.1This practice covers procedures for conducting laboratory corrosion tests in soils to evaluate the corrosive attack on engineering materials. The test is conducted under laboratory ambient temperature unless the effect of temperature is being evaluated. This practice does not include provisions for microbiological influenced corrosion (MIC) testing, nor its influence on results.

1.2This practice covers specimen selection and preparation, test environments, evaluation, and reporting of test results.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	G 01
DocumentType	Standard Practice
Pages	4
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM G 162 : 2023
Supersedes	ASTM G 162 : 1999 : R2010 ASTM G 162 : 1999

ASTM G 71 : 1981 : R1998 : EDT 1	Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM D 698 : 2000	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM G 193 : 2020 : REV A	Standard Terminology and Acronyms Relating to Corrosion
ASTM D 2570 : 1991	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 698 : 2012 : R2021	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM D 2570 : 2016	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1654 : 2005	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM G 4 : 2001 : R2014	Standard Guide for Conducting Corrosion Tests in Field Applications (Withdrawn 2023)
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM G 102 : 1989 : R2015 : EDT 1	Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G 193 : 2022	Standard Terminology and Acronyms Relating to Corrosion
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 2570 : 2009	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM G 102 : 2023	Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G 31 : 2021	Standard Guide for Laboratory Immersion Corrosion Testing of Metals
ASTM D 2570 : 2008	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM G 46 : 1994 : R2018	Standard Guide for Examination and Evaluation of Pitting Corrosion
ASTM D 1654 : 2008 : R2016	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 1654 : 1992 : R2000	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM G 46 : 2021	Standard Guide for Examination and Evaluation of Pitting Corrosion
ASTM G 193 : 2020	Standard Terminology and Acronyms Relating to Corrosion
ASTM G 193 : 2021	Standard Terminology and Acronyms Relating to Corrosion
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 1654 : 2008	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 1654 : 2008 : R2016 : EDT 1	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 2570 : 1996	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 2570 : 2010	Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 698 : 2012 : EDT 2	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))