ASTM G 195 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
Available format(s)
Hardcopy , PDF
Superseded date
01-04-2022
Language(s)
English
Published date
10-25-2018
1.1This guide covers and is intended to assist in establishing procedures for conducting wear tests of rigid or flexible materials utilizing the rotary platform abraser.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.2.1Exception—Inch-pound units are used when stating rotational speed and determining coating thickness.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
G 02
|
| DocumentType |
Guide
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 510/F510M : 2020 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
| ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
| ASTM F 1978 : 2018 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM C 1803 : 2020 | Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser |
| ASTM D 7255 : 2020 | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) |
| ASTM D 3389 : 2021 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM F 2984 : 2013 : R2019 | Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits |
| ASTM D 3489 : 2017 | Standard Test Methods for Microcellular Urethane Materials |
| ASTM C 1353/C1353M : 2020 : EDT 1 | Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser |
| ASTM C 501 : 2021 | Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
| ASTM D 5035 : 1995 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM F 2051 : 2000 : R2014 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM B 607 : 2015 | Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| ASTM C 501 : 2021 | Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
| ASTM D 5144 : 2008 : R2016 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 3794 : 2000 | Standard Guide for Testing Coil Coatings (Withdrawn 2009) |
| ASTM B 607 : 2021 | Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| ASTM D 5324 : 1998 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM G 40 : 2021 | Standard Terminology Relating to Wear and Erosion |
| ASTM F 1344 : 2012 | Standard Specification for Rubber Floor Tile |
| ASTM D 3884 : 1992 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 3730 : 1998 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM F 2068 : 2015 | Standard Specification for Femoral Prostheses—Metallic Implants (Withdrawn 2023) |
| ASTM D 6037 : 2013 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 3389 : 2016 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 6037 : 1996 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 3389 : 2021 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM C 501 : 1984 : R2015 | Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
| ASTM D 3489 : 1996 | Standard Test Methods for Rubber--Microcellular Urethane |
| ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM D 2205 : 1985 : R1998 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 7255 : 2006 | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method) |
| ASTM F 1344 : 2021 | Standard Specification for Rubber Floor Tile |
| ASTM F 1344 : 2003 | Standard Specification for Rubber Floor Tile |
| ASTM D 3794 : 2016 | Standard Guide for Testing Coil Coatings |
| ASTM D 3489 : 2017 | Standard Test Methods for Microcellular Urethane Materials |
| ASTM F 1344 : 2000 | Standard Specification for Rubber Floor Tile |
| ASTM D 1044 : 2013 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 5144 : 2000 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM F 1478 : 1995 : R2000 | Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) |
| ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 2205 : 2015 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 3389 : 2015 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 1044 : 2008 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM D 3451 : 1992 | Standard Practices for Testing Polymeric Powders and Powder Coatings |
| ASTM B 733 : 2021 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM D 6037 : 2018 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM F 1978 : 2017 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM D 3730 : 2017 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM F 1344 : 2015 | Standard Specification for Rubber Floor Tile |
| ASTM D 3389 : 1994 : R1999 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
| ASTM D 4060 : 1995 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 3884 : 2009 : R2017 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 3794 : 2017 | Standard Guide for Testing Coil Coatings |
| ASTM F 2068 : 2000 | Standard Specification for Femoral Prostheses—Metallic Implants |
| ASTM E 1795 : 2000 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5146 : 1998 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM D 5034 : 2021 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM F 2051 : 2000 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM G 40 : 2017 | Standard Terminology Relating to Wear and Erosion |
| ASTM D 1044 : 1999 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM D 5034 : 1995 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 1044 : 2019 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
| ASTM D 5144 : 2008 : R2021 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 6037 : 2021 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 4060 : 2014 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM F 1978 : 1999 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber<sup>TM</sup> Abraser |
| ASTM B 733 : 2015 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM F 1344 : 2021 : REV A | Standard Specification for Rubber Floor Tile |
| ASTM F 1978 : 2018 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.