• There are no items in your cart

ASTM G 63 : 2015 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
Available format(s)

PDF

Language(s)

English

Published date

01-06-2016

CONTAINED IN VOL. 14.04, 2016 Pertains to nonmetallic materials, (hereinafter called materials) under consideration for oxygen or oxygen-enriched fluid service, direct or indirect.

1.1This guide applies to nonmetallic materials, (hereinafter called materials) under consideration for oxygen or oxygen-enriched fluid service, direct or indirect, as defined below. It is intended for use in selecting materials for applications in connection with the production, storage, transportation, distribution, or use of oxygen. It is concerned primarily with the properties of a material associated with its relative susceptibility to ignition and propagation of combustion; it does not involve mechanical properties, potential toxicity, outgassing, reactions between various materials in the system, functional reliability, or performance characteristics such as physical aging, degradation, abrasion, hardening, or embrittlement, except when these might contribute to an ignition.

1.2When this document was originally published in 1980, it addressed both metals and nonmetals. Its scope has been narrowed to address only nonmetals and a separate standard Guide G94 has been developed to address metals.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1:The American Society for Testing and Materials takes no position respecting the validity of any evaluation methods asserted in connection with any item mentioned in this guide. Users of this guide are expressly advised that determination of the validity of any such evaluation methods and data and the risk of use of such evaluation methods and data are entirely their own responsibility.

Note 2:In evaluating materials, any mixture with oxygen exceeding atmospheric concentration at pressures higher than atmospheric should be evaluated from the hazard point of view for possible significant increase in material combustibility.

Committee
G 04
DocumentType
Redline
Pages
26
PublisherName
American Society for Testing and Materials
Status
Current

SAE AS 1248 : 2012 MINIMUM STANDARD FOR GASEOUS OXYGEN PRESSURE REDUCERS
MIL-STD-1330 Revision D:1996 STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS
ASTM G 175 : 2013 : REDLINE Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
ASTM G 126 : 2016 : REDLINE Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
UNE-EN ISO 17879:2017 Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
ASTM G 88 : 2013 : REDLINE Standard Guide for Designing Systems for Oxygen Service
ASTM G 127 : 2015 : REDLINE Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
ASTM F 1792 : 1997 : R2016 : EDT 1 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM G 121 : 1998 : R2004 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 93 : 2003 : R2011 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
BS EN ISO 15001:2011 Anaesthetic and respiratory equipment. Compatibility with oxygen
DEFSTAN 68-287(PT1)/1(2007) : 2007 GUIDE TO THE COMPATIBILITY OF MATERIALS WITH OXYGEN - PART 1: GUIDANCE
DEFSTAN 68-287(PT2)/1(2007) : 2007 GUIDE TO THE COMPATIBILITY OF MATERIALS WITH OXYGEN - PART 2: TEST DATA AND DATA SOURCES
ASTM G 74 : 2013 : REDLINE Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
BS ISO 15001 : 2003 AMD 15145 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
16/30301299 DC : 0 BS EN ISO 17879 - GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING
ASTM G 145 : 20081 Standard Guide for Studying Fire Incidents in Oxygen Systems
SAE AS 1225 : 2012 OXYGEN SYSTEM FILL/CHECK VALVE
SAE AIR 1059 : 2017 OXYGEN CYLINDER QUALITY, SERVICEABILITY, MAINTENANCE TRANSFILLING AND MARKING
SAE AIR 4918 : 2013 INDUSTRY PRACTICES AND GUIDELINES FOR THE SELECTION OF COILED TUBES, FLEXIBLE HOSES, SWIVELS, AND EXTENSION FITTINGS FOR AIRCRAFT FLUID SYSTEMS
ASTM G 114 : 2014 : REDLINE Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
ASTM G 121 : 1998 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 121 : 1998 : R2015 : EDT 1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 94 : 2005 : R2014 Standard Guide for Evaluating Metals for Oxygen Service
ASTM G 86 : 2017 : REDLINE Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
I.S. EN ISO 15001:2011 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010)
NFPA 99C : 2005 GAS AND VACUUM SYSTEMS
I.S. EN ISO 10297:2014 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01)
AEP-33 : B GUIDE TO METHODS OF TEST FOR THE COMPATIBILITY OF MATERIALS USED IN OXYGEN-ENRICHED ENVIRONMENTS
AEP-42 : 2006 GUIDE TO USE OF MATERIALS IN OXYGEN-ENRICHED ENVIRONMENTS
ASTM G 128/G128M : 2015 : REDLINE Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
NFPA 53 : 2016 MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
I.S. EN ISO 17879:2017 GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17879:2017)
NASA KSC KTI 5210 : 2012 MATERIAL SELECTION LIST FOR OXYGEN SERVICE
EN ISO 17879:2017 Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
API 551 : 2016 PROCESS MEASUREMENT
DIN EN ISO 15001:2012-06 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
NASA STD 6016(INT) : 2006 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA STD 6016 : 2016 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
SAE AIR 825/13:2003(R2018) GUIDE FOR EVALUATING COMBUSTION HAZARDS IN AIRCRAFT OXYGEN SYSTEMS
UNI EN ISO 15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
ISO 17879:2017 Gas cylinders — Self-closing cylinder valves — Specification and type testing
SAE AIR 825/13 : 2003 GUIDE FOR EVALUATING COMBUSTION HAZARDS IN AIRCRAFT OXYGEN SYSTEMS
ASTM G 125 : 2000 : R2015 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
BS EN ISO 17879:2017 Gas cylinders. Self-closing cylinder valves. Specification and type testing
ASTM G 121 : 1998 : R2010 : EDT 1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
BS 7825-3.5:1997 Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties
CSA Z15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
ASTM G 94 : 2005 Standard Guide for Evaluating Metals for Oxygen Service
CAN/CSA-Z15001:12 (R2017) Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations)
AAGSP-11 : 2017 GUIDE OF LUBRICANTS FOR USE IN OXYGEN SYSTEMS AND USE OF MATERIALS IN OXYGEN RICH ENVIRONMENTS
SAE AIR 1169 : 2014 BIBLIOGRAPHY OF REFERENCES PERTAINING TO THE EFFECTS OF OXYGEN ON IGNITION AND COMBUSTION OF MATERIALS
ASTM F 1792 : 1997 : R2004 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM G 145 : 2008 : R2016 Standard Guide for Studying Fire Incidents in Oxygen Systems
ASTM G 93 : 2003 : EDT 1 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM G 125 : 2000 : R2008 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing
UNE-EN ISO 10297:2015 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01)
ISO 15001:2010 Anaesthetic and respiratory equipment Compatibility with oxygen
BS EN ISO 10297 : 2014 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING
EN ISO 10297:2014/A1:2017 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017)
EN ISO 15001:2011 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
ASTM F 1792 : 1997 : R2010 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM F 1792 : 1997 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM G 125 : 2000 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
UNE-EN ISO 15001:2012 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
ASME PVHO 1 : 2016 SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY

ASTM D 566 : 2017 : REDLINE Standard Test Method for Dropping Point of Lubricating Grease
ASTM G 88 : 2013 : REDLINE Standard Guide for Designing Systems for Oxygen Service
ASTM G 72 : 2001 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM D 217 : 2017 : REDLINE TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE
ASTM D 2512 : 2017 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
ASTM G 86 : 1998 : REV A Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
ASTM G 74 : 2013 : REDLINE Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
CGA G 4.4 : 2012 OXYGEN PIPELINE AND PIPING SYSTEMS
NSS 1740.15 : 0 SAFETY STANDARD FOR OXYGEN AND OXYGEN SYSTEMS

View more information
US$108.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.