• There are no items in your cart

ASTM G 86 : 2017

Current
Current

The latest, up-to-date edition.

Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-14-2018

1.1This test method2 describes test equipment and techniques to determine the impact sensitivity of materials in oxygen under two different conditions: (1) in ambient pressure liquid oxygen (LOX) or (2) under pressure-controlled conditions in LOX or gaseous oxygen (GOX). It is applicable to materials for use in LOX or GOX systems at pressures from ambient to 68.9 MPa (0 to 10 000 psig). The test method described herein addresses testing with pure oxygen environments; however, other oxygen-enriched fluids may be substituted throughout this document.

1.2This test method provides a means for ranking nonmetallic materials as defined in Guide G63 for use in liquid and gaseous oxygen systems and may not be directly applicable to the determination of the sensitivity of the materials in an end-use configuration. This test method may be used to provide batch-to batch acceptance data. This test method may provide a means for evaluating metallic materials in oxygen-enriched atmospheres also; however, Guide G94 should be consulted for preferred testing methods.

1.3Values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See also Section 9.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
G 04
DocumentType
Test Method
Pages
23
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM G 128/G128M : 2015 Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM D 7194 : 2019 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
ASTM G 63 : 2015 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
ASTM G 127 : 2015 Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
ASTM G 126 : 2016 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
ASTM G 94 : 2005 : R2014 Standard Guide for Evaluating Metals for Oxygen Service

ASTM G 94 : 2005 : R2014 Standard Guide for Evaluating Metals for Oxygen Service
ASTM G 88 : 2013 : EDT 1 Standard Guide for Designing Systems for Oxygen Service
ASTM G 94 : 2022 Standard Guide for Evaluating Metals for Oxygen Service
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM G 88 : 2013 Standard Guide for Designing Systems for Oxygen Service
ASTM D 4080 : 2015 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM G 88 : 2021 Standard Guide for Designing Systems for Oxygen Service
ASTM G 63 : 2015 : R2023 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
ASTM D 4080 : 2000 : R2011 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 4080 : 1996 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM D 4080 : 2000 : R2006 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM D 4080 : 2015 : R2020 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 4080 : 2000 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water

View more information
US$90.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.