AWWA C111/A21.11 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS
Hardcopy , PDF
08-04-2023
English
04-01-2017
Foreword
I Introduction
II Special Issues
III Use of This Standard
IV Major Revisions
V Comments
Standard
1 General
2 References
3 Definitions
4 Requirements
5 Verification
6 Delivery
Appendixes
A - Mechanical-Joint Bolts, Gaskets,
and Installation
B - Push-on Joint Design, Gaskets,
Lubricant, and Installation
C - Flanged-Joint Bolts, Gaskets,
and Installation
D - Effects of Chloramines on Ductile-Iron Pipe
Gaskets and Elastomers
Specifies rubber-gasket joints of the following types for ductile-iron pressure pipe and ductile-iron and gray-iron fittings, valves, hydrants, and other appurtenances for potable water, wastewater, and reclaimed water supply service.
DevelopmentNote |
Supersedes WW P 401 (07/2004)
|
DocumentType |
Standard
|
ISBN |
978-1-58321-210-8
|
Pages |
56
|
PublisherName |
American Water Works Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ANSI A21.52 : 1991 | DUCTILE IRON PIPE, CENTRIFUGALLY CAST, GAS |
AWWA C502 : 2014 | DRY-BARREL FIRE HYDRANTS |
FM 1610 : 2016 | DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS |
ASTM A 377 : 2003 : R2014 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
AWWA M44 : 2016 | DISTRIBUTION VALVES: SELECTION, INSTALLATION, FIELD TESTING, AND MAINTENANCE |
ASTM A 377 : 2003 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
AWWA C223 : 2013 | FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES |
MSS SP 128 : 2012 | DUCTILE IRON GATE VALVES |
MSS SP 124 : 2016 | FABRICATED TAPPING SLEEVES |
ASTM A 377 : 2003 : R2008 : EDT 1 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
ASTM A 746 : 2009 : R2014 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
FM 1615 : 2009 | CAST IRON PIPE, FITTINGS AND COUPLINGS |
AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
ASTM C 966 : 1998 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
ASME B31.1 : 2016 | POWER PIPING |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
ASME B31.3:2016 | PROCESS PIPING |
AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
ASTM C 966 : 1998 : R2003 : EDT 1 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
MSS SP 60 : 2017 | CONNECTING FLANGE JOINT BETWEEN TAPPING SLEEVES AND TAPPING VALVES |
ASTM C 966 : 1998 : R2003 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
MSS SP 136 : 2014 | DUCTILE IRON SWING CHECK VALVES |
ASTM C 966 : 1998 : R2008 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
ASTM C 966 : 1998 : R2014 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe (Withdrawn 2019) |
ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
AWWA C605 : 2013 | UNDERGROUND INSTALLATION OF POLYVINYL CHLORIDE (PVC) AND MOLECULARLY ORIENTED POLYVINYL CHLORIDE (PVCO) PRESSURE PIPE AND FITTINGS |
AWWA M41 : 3 | DUCTILE-IRON PIPE AND FITTINGS |
AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
CGA B105 : 1993 | CODE FOR DIGESTER GAS AND LANDFILL GAS INSTALLATIONS |
AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
AWWA C517 : 2016 | RESILIENT-SEATED CAST-IRON ECCENTRIC PLUG VALVES |
MSS SP 116 : 2014 | SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS |
ASTM A 746 : 2009 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
AWWA M28 : 2014 | REHABILITATION OF WATER MAINS |
MSS SP 113 : 2017 | CONNECTING JOINTS BETWEEN TAPPING MACHINES AND TAPPING VALVES |
AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
NSF 61 : 2016 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
AWWA C600 : 2010 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
AWWA C651 : 2014 | DISINFECTING WATER MAINS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.