BIS IS 3177 : 1999(R2004)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES
Superseded date
07-08-2020
Published date
01-12-2013
Publisher
FOREWORD
1 SCOPE
2 REFERENCES
SECTION 1 - GENERAL
3 TERMINOLOGY
4 TECHNICAL INFORMATION TO BE PROVIDED
5 IDENTIFICATION AND LOAD INDICATION
6 CLASSIFICATION
SECTION 2 - MECHANICAL
7 DESIGN OF CRANE MECHANISM
8 SELECTION OF COMPONENTS
9 GUARDING AND WEATHER PROTECTION
10 LUBRICATION
11 MOTION LIMITING DEVICES
SECTION 3 - ELECTRICAL
12 MOTORS
13 ELECTRIC BRAKING
14 CRANE CONTROLLING ARRANGEMENTS
15 PROTECTIVE EQUIPMENT
16 ISOLATION
17 LIFTING MAGNET AND RELATED EQUIPMENTS
18 RESISTORS
19 LIMIT SWITCHES
20 CABLES AND CONDUCTORS
21 AUXILIARY REQUIREMENTS
22 CONDUCTORS AND CURRENT COLLECTORS
23 EARTHING
24 ELECTRICAL EQUIPMENTS LOCATED ON THE CRANE BRIDGE
25 DRAWINGS
SECTION 4 - INSPECTION AND TESTING
26 INSPECTION PROCEDURE
27 GENERAL REMARKS
28 TESTING
ANNEX A - INFORMATION TO BE SUPPLIED WITH ENQUIRY
ANNEX B - DETERMINATION OF FATIGUE REFERENCE STRESS
ANNEX C - NOTES ON DESIGN AND SELECTION OF MOTORS
ANNEX D - INTERMITTENT RATINGS FOR RESISTORS
ANNEX E - CRANE-RECOMMENDED/PREFERRED PARAMETERS
ANNEX F - LIST OF INDIAN STANDARDS
Specifies mechanical, electrical, inspection and testing requirements relating to the design, manufacturing and erection of electric overhead travelling cranes, portal and semi-portal cranes, single girder, double girder or mono-box type.
| Committee |
MED 14
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Superseded
|
| SupersededBy |
| BIS IS 15419 : 2004 | JIB CRANES - CODE OF PRACTICE |
| BIS IS 1367-18 : 1996(R2006) | INDUSTRIAL FASTENERS - THREADED STEEL FASTENERS - TECHNICAL SUPPLY CONDITIONS - PART 18: PACKAGING |
| BIS IS 9968-1 : 1988 AMD 3 2016 | SPECIFICATION FOR ELASTOMER INSULATED CABLES - PART 1: FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS |
| BIS IS 7403 : 1974(R2001) | CODE OF PRACTICE FOR SELECTION OF STANDARD WORM AND HELICAL GEAR BOXES |
| BIS IS 325 : 1996 AMD 3 2011 | THREE-PHASE INDUCTION MOTORS - SPECIFICATION |
| BIS IS 816 : 1969(R1998) | CODE OF PRACTICE FOR USE OF METAL ARC WELDING FOR GENERAL CONSTRUCTION IN MILD STEEL |
| BIS IS 1367-9-2 : 1993(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 9: SURFACE DISCONTINUITIES - SECTION 2: BOLTS, SCREWS AND STUDS FOR SPECIAL APPLICATIONS |
| BIS IS 2291 : 1990(R2001) | TANGENTIAL KEYS AND KEYWAYS |
| BIS IS 1856 : 2005 AMD 2 2008 | STEEL WIRE ROPES FOR HAULAGE PURPOSES - SPECIFICATION |
| BIS IS 1554-2 : 1988(R2005) | SPECIFICATION FOR PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES - PART 2: FOR WORKING VOLTAGES FROM 3.3 KV UP TO AND INCLUDING 11 KV |
| BIS IS 8544-4 : 1979 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 4: REDUCED VOLTAGE AC STARTERS - TWO STEP AUTO-TRANSFORMER STARTERS |
| BIS IS 1554-1 : 1988 AMD 5 2012 | SPECIFICATION FOR PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES - PART 1: FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 V |
| BIS IS 3757 : 1985(R2003) | SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS |
| BIS IS 2294 : 1986(R2002) | SPECIFICATION FOR WOODRUFF KEYS AND KEYWAYS |
| IS 10118 : Part 2 : 1982(R2016) | CODE OF PRACTICE FOR SELECTION, INSTALLATION AND MAINTENANCE OF SWITCHGEAR AND CONTROLGEAR - PART 2: SELECTION |
| BIS IS 818 : 1968(R2003) | CODE OF PRACTICE FOR SAFETY AND HEALTH REQUIREMENTS IN ELECTRIC AND GAS WELDING AND CUTTING OPERATIONS |
| BIS IS 2223 : 1983(R2017) | DIMENSIONS OF FLANGE MOUNTED AC INDUCTION MOTORS |
| BIS IS 2467 : 2002 | INTERNATIONAL GEAR NOTATION - SYMBOLS FOR GEOMETRICAL DATA |
| BIS IS 9537-2 : 1981(R2017) | CONDUITS FOR ELECTRICAL INSTALLATIONS - PART 2: RIGID STEEL CONDUITS |
| BIS IS 2253 : 1974(R2017) | DESIGNATION FOR TYPES OF CONSTRUCTION AND MOUNTING ARRANGEMENT OF ROTATING ELECTRICAL MACHINES |
| BIS IS 2516-1-1 : 1985 | CIRCUIT BREAKERS - PART 1 & 2: REQUIREMENTS AND TESTS - SECTION 1: VOLTAGES NOT EXCEEDING 1000 V AC OR 1200 V DC |
| BIS IS 1024 : 1999(R2005) | CODE OF PRACTICE FOR USE OF WELDING IN BRIDGES AND STRUCTURES SUBJECT TO DYNAMIC LOADING |
| BIS IS 13743-1 TO 10 : 1997(R2003) | CARBIDE TIPPED SINGLE POINT TOOLS - IND SERIES - SPECIFICATION |
| BIS IS 3734 : 1983(R2016) | DIMENSIONS FOR WORM GEARING |
| BIS IS 9595 : 1996(R2003) | METAL-ARC WELDING OF CARBON AND CARBON MANGANESE STEELS - RECOMMENDATIONS |
| BIS IS 6167 : 1971(R2001) | SPECIFICATION FOR THIN PARALLEL KEYS AND KEYWAYS |
| BIS IS 1030 : 1998 | CARBON STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES - SPECIFICATION |
| BIS IS 1367-14 : 1984(R2001) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 14: STAINLESS STEEL THREADED FASTENERS |
| BIS IS 822 : 1970(R2003) | CODE OF PROCEDURE FOR INSPECTION OF WELDS |
| BIS IS 10118-3 : 1982(R2016) | CODE OF PRACTICE FOR SELECTION, INSTALLATION AND MAINTENANCE OF SWITCHGEAR AND CONTROLGEAR - PART 3: INSTALLATION |
| BIS IS 1364-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 3: HEXAGON NUTS, STYLE 1 (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 1231 : 1974(R2008) | DIMENSIONS OF THREE-PHASE FOOT-MOUNTED INDUCTION MOTORS |
| BIS IS 6639 : 2005 | HEXAGON HEAD BOLTS FOR GENERAL STEEL STRUCTURES - SPECIFICATION |
| BIS IS 13947-1 : 1993(R2004) | SPECIFICATION FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| BIS IS 9968-2 : 2002(R2017) | SPECIFICATION FOR ELASTOMER-INSULATED CABLES - PART 2: FOR WORKING VOLTAGES FROM 3.3 KV UP TO AND INCLUDING 33 KV |
| BIS IS 12065 : 1987(R2009) | PERMISSIBLE LIMITS OF NOISE LEVELS FOR ROTATING ELECTRICAL MACHINES |
| BIS IS 10118-1 : 1982(R2016) | CODE OF PRACTICE FOR SELECTION, INSTALLATION AND MAINTENANCE OF SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL |
| BIS IS 4722 : 2001(R2006) | ROTATING ELECTRICAL MACHINES - SPECIFICATION |
| BIS IS 1364-4 : 2003 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 4: HEXAGON THIN NUTS (CHAMFERED) (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 9537-1 : 1980(R2015) | CONDUITS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BIS IS 1367-12 : 1981(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 12: PHOSPHATE COATINGS ON THREADED FASTENERS |
| BIS IS 2266 : 2002(R2017) | STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES - SPECIFICATION |
| BIS IS 8544-1 : 1977 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 1: DIRECTION LINE AC STARTERS |
| BIS IS 1367-13 : 1983(R2001) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 13: HOT-DIP GALVANIZED COATINGS ON THREADED FASTENERS |
| IS 2365 : 1977(R2017) | SPECIFICATION FOR STEEL WIRE SUSPENSION ROPES FOR LIFTS, ELEVATORS AND HOISTS |
| BIS IS 694 : 2010(R2015) | POLYVINYL CHLORIDE INSULATED UNSHEATHED AND SHEATHED CABLES/CORDS WITH RIGID AND FLEXIBLE CONDUCTOR FOR RATED VOLTAGES UP TO AND INCLUDING 1100 V |
| BIS IS 1364-2 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 2: HEXAGON HEAD SCREWS (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 1364-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 807 : 2006 | DESIGN, ERECTION AND TESTING (STRUCTURAL PORTION) OF CANES AND HOISTS - CODE OF PRACTICE |
| BIS IS 3427 : 1997(R2002) | A.C. METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| BIS IS 10911 : 1984(R2016) | METHODS OF INSPECTION FOR STRAIGHT BEVEL GEARS |
| BIS IS 8130 : 2013(R2015) | CONDUCTORS FOR INSULATED ELECTRIC CABLES AND FLEXIBLE CORDS - SPECIFICATION |
| BIS IS 7504 : 1995(R2016) | GEARS - CYLINDRICAL GEARS - ACCURACIES - METHODS OF INSPECTION |
| BIS IS 9537-4 : 1983(R2017) | SPECIFICATION FOR CONDUITS FOR ELECTRICAL INSTALLATIONS - PART 4: PLIABLE SELF-RECOVERING CONDUITS OF INSULATING MATERIALS |
| BIS IS 6166 : 1971(R2001) | SPECIFICATION FOR THIN TAPER KEYS AND KEYWAYS |
| BIS IS 3043 : 1987(R2016) | CODE OF PRACTICE FOR EARTHING |
| BIS IS 13834-1 : 1994(R2003) | CRANES - CLASSIFICATION - PART 1: GENERAL |
| BIS IS 1239-2 : 2011 AMD 1 2012 | STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS - SPECIFICATION - PART 2: STEEL PIPE FITTINGS |
| BIS IS 2048 : 1983 AMD 2 2005 | SPECIFICATION FOR PARALLEL KEYS AND KEYWAYS |
| BIS IS 2762 : 2009 | WIRE ROPE SLINGS AND SLING LEGS - SPECIFICATION |
| BIS IS 8544-2 : 1977 AMD 1 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 2: STAR-DELTA STARTERS |
| BIS IS 2292 : 1974(R2002) | SPECIFICATION FOR TAPER KEYS AND KEYWAYS |
| BIS IS 9537-3 : 1983(R2017) | CONDUITS FOR ELECTRICAL INSTALLATIONS - PART 3: RIGID PLAIN CONDUITS OF INSULATING MATERIALS |
| BIS IS 13834-5 : 1993(R2003) | CRANES - CLASSIFICATION - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES |
| BIS IS 8544-3-2 : 1979 | MOTOR STARTERS FOR VOLTAGES NOT EXCEEDING 1000 V - PART 3: RHEOSTATIC MOTOR STARTERS - SECTION 2: ADDITIONAL REQUIREMENTS FOR AC RHEOSTATIC MOTOR CONTROLLERS |
| BIS IS 1387 : 1993(R2003) | GENERAL REQUIREMENTS FOR THE SUPPLY OF METALLURGICAL MATERIALS |
| BIS IS 1367-7 : 1980(R2003) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 7: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITHOUT SPECIFIED PROOF LOADS |
| BIS IS 1367-10 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 10: SURFACE DISCONTINUITIES - NUTS |
| BIS IS 1367-6 : 1994(R2015) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 6: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITH SPECIFIED PROOF LOADS |
| BIS IS 13118 : 1991(R2002) | SPECIFICATION FOR HIGH-VOLTAGE ALTERNATING-CURRENT CIRCUIT-BREAKERS |
| BIS IS 3973 : 1984(R2017) | CODE OF PRACTICE FOR THE SELECTION, INSTALLATION AND MAINTENANCE OF WIRE ROPES |
| BIS IS 1323 : 1982(R2003) | CODE OF PRACTICE FOR OXY-ACETYLENE WELDING FOR STRUCTURAL WORK IN MILD STEELS |
| BIS IS 210 : 2009(R2014) | GREY IRON CASTINGS - SPECIFICATION |
| BIS IS 900 : 1992(R2003) | CODE OF PRACTICE FOR INSTALLATION AND MAINTENANCE OF INDUCTION MOTORS |
| BIS IS 4728 : 1975(R2002) | TERMINAL MARKINGS AND DIRECTION OF ROTATION FOR ROTATING ELECTRICAL MACHINERY |
| BIS IS 2535 : 1978(R2001) | BASIC RACK AND MODULES OF CYLINDRICAL GEARS FOR GENERAL ENGINEERING AND HEAVY ENGINEERING |
| BIS IS 4691 : 1985(R2004) | DEGREES OF PROTECTION PROVIDED BY ENCLOSURE FOR ROTATING ELECTRICAL MACHINERY |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| BIS IS 6594 : 2001(R2017) | TECHNICAL SUPPLY CONDITIONS FOR STEEL WIRE ROPES AND STRANDS |
| BIS IS 3640 : 1982(R2011) | SPECIFICATION FOR HEXAGON FIT BOLTS |
| BIS IS 10118-4 : 1982(R2016) | CODE OF PRACTICE FOR SELECTION, INSTALLATION AND MAINTENANCE OF SWITCHGEAR AND CONTROLGEAR - PART 4: MAINTENANCE |
| BIS IS 4137 : 2015(R2015) | HEAVY DUTY ELECTRIC OVERHEAD TRAVELLING CRANES INCLUDING SPECIAL SERVICE MACHINES FOR USE IN STEEL WORK - CODE OF PRACTICE |
| BIS IS 1367-16 : 2002 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 16: DESIGNATION SYSTEM FOR FASTENERS |
| BIS IS 1364-5 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 5: HEXAGON THIN NUTS - PRODUCT GRADE B (UNCHAMFERED) (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 6535 : 1979(R2001) | DATA FOR PROCUREMENT OF STRAIGHT BEVEL GEARS |
| BIS IS 1239-1 : 2004 AMD 5 2017 | STEEL TUBES, TUBULARS AND OTHER WROUGHT STEEL FITTINGS - SPECIFICATION - PART 1: STEEL TUBES |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.