BIS IS 6533-2 : 1989(R2003)
Current
Current
The latest, up-to-date edition.
CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF STEEL CHIMNEY - PART 2: STRUCTURAL ASPECT
Published date
01-12-2013
Publisher
FOREWORD
1 SCOPE
2 REFERENCES
3 STATUTORY PROVISIONS
4 TERMINOLOGY
5 MATERIALS
6 LOADING AND LOAD COMBINATIONS
7 DESIGN
8 DESIGN CALCULATION
9 STABILITY
10 MISCELLANEOUS COMPONENTS
11 CONSTRUCTION
12 INSPECTION AND MAINTENANCE
13 PROTECTIVE TREATMENTS
ANNEX A - WIND EXCITED OSCILLATIONS
ANNEX B - LIST OF INDIAN STANDARDS REFERRED
ANNEX C - ALLOWABLE COMPRESSIVE STRESSES
Describes terminology, loading, materials, structural design, construction, inspection, maintenance and painting of both self-supporting and guyed steel chimneys and their supporting structures.
| Committee |
CED 7
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| BIS IS 1893-4 : 2015 | CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 4: INDUSTRIAL STRUCTURES INCLUDING STACK-LIKE STRUCTURES |
| BIS IS 961 : 1975 | STRUCTURAL STEEL (HIGH TENSILE) |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BIS IS 2155 : 1982(R2001) | SPECIFICATION FOR COLD FORGED SOLID STEEL RIVETS FOR HOT CLOSING (6 TO 16 MM DIAMETER) |
| BIS IS 1394 : 1984(R2001) | GLOSSARY OF TERMS RELATING TO METAL CONTAINERS |
| BIS IS 7002 : 2005 | PREVAILING TORQUE TYPE HEXAGON NUTS (WITH NON-METALLIC INSERT) - STYLE 1: PROPERTY CLASSES 5, 8 AND 10 |
| BIS IS 1477-1 : 1971(R2005) | CODE OF PRACTICE FOR PAINTING OF FERROUS METALS IN BUILDINGS - PART 1: PRETREATMENT |
| BIS IS 816 : 1969(R1998) | CODE OF PRACTICE FOR USE OF METAL ARC WELDING FOR GENERAL CONSTRUCTION IN MILD STEEL |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| BIS IS 3757 : 1985(R2003) | SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS |
| IS 875-1 : 1987(R2008) | CODE OF PRACTICE FOR DESIGN LOADS (OTHER THAN EARTHQUAKE) FOR BUILDINGS AND STRUCTURES - PART 1: DEAD LOADS - UNIT WEIGHTS OF BUILDING MATERIALS AND STORED MATERIALS |
| BIS IS 5624 : 1993(R2008) | FOUNDATION BOLTS - SPECIFICATION |
| BIS IS 1030 : 1998 | CARBON STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES - SPECIFICATION |
| BIS IS 1893 : 1984(R2008) | CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES |
| BIS IS 2309 : 1989 AMD 1 2006 | CODE OF PRACTICE FOR THE PROTECTION OF BUILDINGS AND ALLIED STRUCTURES AGAINST LIGHTNING |
| BIS IS 814 : 2004(R2010) | COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CARBON AND CARBON MANGANESE STEEL - SPECIFICATION |
| BIS IS 5372 : 1975(R2001) | TAPER WASHERS FOR CHANNELS (ISMC) |
| BIS IS 6639 : 2005 | HEXAGON HEAD BOLTS FOR GENERAL STEEL STRUCTURES - SPECIFICATION |
| BIS IS 1929 : 1982 AMD 4 2014 | SPECIFICATION FOR HOT FORGED STEEL RIVETS FOR HOT CLOSING (12 TO 36 MM DIAMETER) |
| BIS IS 3613 : 1974(R2006) | ACCEPTANCE TESTS FOR WIRE FLUX COMBINATION FOR SUBMERGED ARC WELDING |
| BIS IS 226 : 1975 | STRUCTURAL STEEL (STANDARD QUALITY) |
| BIS IS 6586 : 1989(R2016) | RECOMMENDED PRACTICE FOR METAL SPRAYING FOR PROTECTION OF IRON STEEL |
| BIS IS 2266 : 2002(R2017) | STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES - SPECIFICATION |
| BIS IS 456 : 2000(R2016) | PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE |
| BIS IS 2141 : 2000(R2005) | HOT DIP GALVANIZED STAY STRAND - SPECIFICATION |
| BIS IS 6649 : 1985(R2010) | SPECIFICATION FOR HARDENED AND TEMPERED WASHERS FOR HIGH STRENGTH STRUCTURAL BOLTS AND NUTS |
| BIS IS 1364-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 1.6 TO M 64) |
| BIS IS 1363-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| BIS IS 7282 : 1975(R2003) | SPECIFICATION FOR CHISEL, LABYRINTH, STRAIGHT, LAKE'S PATTERN |
| BIS IS 6419 : 1996 AMD 1 2008 | WELDING RODS AND BARE ELECTRODES FOR GAS SHIELDED ARC WELDING OF STRUCTURAL STEELS - SPECIFICATION |
| BIS IS 5369 : 1975(R2001) | GENERAL REQUIREMENTS FOR PLAIN WASHERS AND LOCK WASHERS |
| BIS IS 1149 : 1982(R2004) | HIGH TENSILE STEEL RIVET BARS FOR STRUCTURAL PURPOSES |
| BIS IS 6623 : 2004 | HIGH STRENGTH STRUCTURAL NUTS - SPECIFICATION |
| BIS IS 1477-2 : 1971(R2005) | CODE OF PRACTICE FOR PAINTING OF FERROUS METALS IN BUILDINGS - PART 2: PAINTING |
| BIS IS 8500 : 1991(R2000) | STRUCTURAL STEEL - MICROALLOYED (MEDIUM AND HIGH STRENGTH QUALITIES) - SPECIFICATION |
| BIS IS 1367-6 : 1994(R2015) | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 6: MECHANICAL PROPERTIES AND TEST METHODS FOR NUTS WITH SPECIFIED PROOF LOADS |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| BIS IS 3640 : 1982(R2011) | SPECIFICATION FOR HEXAGON FIT BOLTS |
| BIS IS 6610 : 1972(R2001) | SPECIFICATION FOR HEAVY WASHERS FOR STEEL STRUCTURES |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.