• There are no items in your cart

BS 245:1976

Current
Current

The latest, up-to-date edition.

Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-30-1976

Foreword
Cooperating organizations
Specification
1. Scope and field of application
2. References
3. Required characteristics and their tolerances
4. Samples
Appendices
A. Method for the comparison of colour
B. Method for the determination of viscosity
    reduction power
Table
1. Required characteristics and their tolerances

Types A and B solvents based on two ranges of aromatic content. Methods for colour and viscosity reduction power are appended and other BS methods referred to.

This British Standard specifies the requirements for two categories of mineral solvents for use in paints and varnishes, and for other purposes, as follows:

Type A, having an aromatics content below 25 % (v/v);

Type B, having an aromatics content of 25 % to 50 % (v/v).

These materials meet the requirements of the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972 as not constituting \'highly flammable liquids\'.

Committee
STI/10
DevelopmentNote
Supersedes 74/54719 DC (06/2005) Reviewed and confirmed by BSI, February 2011. (01/2011)
DocumentType
Standard
Pages
8
PublisherName
British Standards Institution
Status
Current

BS 1336:1971 Specification for knotting
14/30247416 DC : 0 BS AU 145E - SPECIFICATION FOR RETROREFLECTING NUMBER PLATES
BS 2523:1966 Specification for lead-based priming paints
DEFSTAN 81-56/5(2014) : 2014 PACKAGING OF PISTONS, ASSEMBLED OR UNASSEMBLED AND PISTON SETS
UNE-EN 14865-1:2010 Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
DEFSTAN 81-56/2(1996) : 1996 PACKAGING OF PISTONS, PISTON RINGS AND GUDGEON PINS
07/30159027 DC : 0 BS EN 14865-1 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE ORDINARY-SPEED VEHICLES WITH SPEEDS UP TO 200 KM/H AND HIGH-SPEED VEHICLES WITH SPEEDS UP TO 300 KM/H
BS 5666-4:1979 Methods of analysis of wood preservatives and treated timber Quantitative analysis of preservatives and treated timber containing copper naphthenate
BS 684-1.7:1976 Methods of analysis of fats and fatty oils. Physical methods Determination of surface-drying time
BS 2569-2:1965 Specification for sprayed metal coatings Protection of iron and steel against corrosion and oxidation at elevated temperatures.
BS 8459:2005 Determination of extractable matter in textiles. Method
DIN ISO 11009:2007-07 PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF WATER WASHOUT CHARACTERISTICS OF LUBRICATING GREASES
DEFSTAN 81-32/7(2015) : 2015 PACKAGING OF BALL AND ROLLER BEARINGS
DEFSTAN 80-27/5(2009) : 2009 PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI-GLOSS; MATT
DEFSTAN 81-67/1(1989) : 1989 PACKAGING OF RAF MOBILE GROUND SUPPORT EQUIPMENT
DEFSTAN 81-70/2(2003) : 2003 PRESERVATION OF ENGINES (GASOLINE AND DIESEL)
DEFSTAN 02-373/2(2003) : 2003 CODE OF PRACTICE FOR COMPRESSED AIR SYSTEMS CLEANLINESS CATEGORY 2
DEFSTAN 80-68/4(2009) : 2009 PAINT, MARKING - TYPES: BRUSHING, BRUSH STENCILLING, SPRAY STENCILLING, SILK SCREEN STENCILLING, INK JET SPRAYING
DEFSTAN 81-70/3(2010) : 2010 PRESERVATION OF ENGINES (GASOLINE AND DIESEL)
DEFSTAN 81-055/7(2017) : 2017 PACKAGING OF MECHANICAL COMPONENTS & ITEMS
DEFSTAN 03-2/6(2011) : 2011 CLEANING AND PREPARATION OF METAL SURFACES
DEFSTAN 91-51/2(2003) : 2003 GREASE, AIRCRAFT: HELICOPTER OSCILLATING BEARING NATO CODE: G-366 JOINT SERVICE DESIGNATION: XG-284
DEFSTAN 81-055/8(2021):2021 Packaging of Mechanical Components & Items
DEFSTAN 80-31/4(2005) : 2005 PAINT, FINISHING, GENERAL SERVICE ALUMINIUM TYPE: BRUSHING OR SPRAYING
DEFSTAN 79-16/2(2006) : 2006 DETERGENT SOLUTION, FOR THE CLEANING OF VEHICLES AND POWER PACKS IN PRESSURE WASHING MACHINES AND AUTOMATIC EQUIPMENT
DEFSTAN 47-12/4(1987) : 1987 POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT
DEFSTAN 81-41(PT5)/7(2014) : 2014 PACKAGING OF DEFENCE MATERIEL - PART 5 - PACKAGING PROCESSES
DEFSTAN 81-41(PT5)/6(2008) : 2008 PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES
DEFSTAN 80-054/6(2017) : 2017 PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING
DEFSTAN 81-63/4(2014) : 2014 PACKAGING OF FUEL INJECTION PUMPS AND FUEL INJECTORS
DEFSTAN 80-114/1(1985) : 1985 PAINT, PRIMING, DEFENCE EQUIPMENT AIR DRYING - TYPES: BRUSHING, SPRAYING DIPPING
DEFSTAN 81-41(PT2)/6(2005) : 2005 PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
DEFSTAN 81-131/1(1996) : 1996 PACKAGING INFORMATION USED FOR LOGISTIC SUPPORT ANALYSIS RECORDS
DEFSTAN 03-2/4(2005) : 2005 CLEANING AND PREPARATION OF METAL SURFACES
DEFSTAN 80-54/5(2010) : 2010 PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING
DEFSTAN 81-55/6(2013) : 2013 PACKAGING OF MECHANICAL COMPONENTS
DEFSTAN 91-68/1(2002) : 2002 AMD 1 2005 LUBRICATING OIL, ENGINE, SEVERE DUTY, DIESEL, LOW TEMPERATURE NATO CODE: O-1178 JOINT SERVICE DESIGNATION: OMD-55
DEFSTAN 81-63/2(2003) : 2003 PACKAGING OF FUEL INJECTION PUMPS AND FUEL INJECTORS
DEFSTAN 81-41(PT2)/7(2014) : 2014 PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
DEFSTAN 68-147/2(2002) : 2002 LIQUID CLEANER FOR USE ON AIRCRAFT TRANSPARENCIES
DEFSTAN 03-2/5(2009) : 2009 CLEANING AND PREPARATION OF METAL SURFACES
DEFSTAN 80-54/4(2005) : 2005 PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING
DEFSTAN 81-41(PT2)/5(2002) : 2002 PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
DEFSTAN 80-25/5(2009) : 2009 PAINT, AMMUNITION FINISHING, STOVING SPRAYING AND DIPPING - TYPES: SEMI-GLOSS, MATT
DEFSTAN 80-69/4(2007) : 2007 PAINT, PASTE, MARKING
DEFSTAN 13-166/2(2013) : 2013 GUNPOWDER, SULFURLESS - TYPES: SFG 12, SFG 20, SFG 40, SFG 90 AND SMP
DEFSTAN 91-113/2(2007) : 2007 LUBRICATING OIL, ENGINE: SEVERE DUTY DIESEL, EXTENDED SERVICE - SAE 10W/30 NATO CODE: O-1176 JOINT SERVICE DESIGNATION: OMD-90
DEFSTAN 03-2/3(1995) : 1995 CLEANING AND PREPARATION OF METAL SURFACES
DEFSTAN 81-41(PT2)/8(2015) : 2015 PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
DEFSTAN 80-69/3(1998) : 1998 PAINT, PASTE, MARKING
SAEITC TSC 47-012 ISSUE 4:2018 POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT
I.S. EN 14865-2:2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
DEFSTAN 81-70/4(2015) : 2015 PRESERVATION OF ENGINES (GASOLINE AND DIESEL)
DEFSTAN 81-061/5(2017) : 2017 PRESERVATION OF AUTOMOTIVE AND SIMILAR ITEMS
DEFSTAN 81-59/2(2002) : 2002 PACKAGING OF CRANKSHAFTS AND ASSOCIATED BEARINGS
DEFSTAN 81-63/3(2009) : 2009 PACKAGING OF FUEL INJECTION PUMPS AND FUEL INJECTORS
DEFSTAN 13-169/1(1994) : 1994 COMPOSITION SR 607
DEFSTAN 05-50(PT23)/2(1997) : 1997 METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 23: METHODS FOR CORROSION PREVENTATIVES
DEFSTAN 81-55/5(2009) : 2009 PACKAGING OF MECHANICAL COMPONENTS
DEFSTAN 81-41(PT5)/5(2002) : 2002 PACKAGING OF DEFENCE MATERIEL - PART 5: PRODUCTION PROCESSES
BS 388:1972 Specification for aluminium pigments
BS 544:1969 Specification for linseed oil putty for use in wooden frames
BS 6127-2:1982 Petrographic analysis of bituminous coal and anthracite Method of preparing coal samples for petrographic analysis
BS 282; 389:1963 Specifications for lead chromes and zinc chromes for paints
DEFSTAN 81-72/3(2009) : 2009 PRESERVATION OF CYLINDER BLOCKS (WITH OR WITHOUT PISTONS) AND CYLINDER HEADS
DEFSTAN 79-9/2(2004) : INTERIM POLISH, METAL (LIQUID)
DEFSTAN 81-62/3(2006) : 2006 PRESERVATION OF MECHANICAL POWER TRANSMISSION ASSEMBLIES
DEFSTAN 81-62/2(1991) : 1991 PRESERVATION OF MECHANICAL POWER TRANSMISSION ASSEMBLIES
BS DD257-1(2003) : 2003 METHODS OF ANALYSIS OF WOOD PRESERVATIVES AND TREATED TIMBER - PART 1: QUANTITATIVE ANALYSIS OF WOOD PRESERVATIVE SOLUTIONS AND TREATED TIMBER CONTAINING BORON COMPOUNDS - DETERMINATION OF TOTAL BORON
DEFSTAN 81-32/5(2004) : 2004 PACKAGING OF BALL AND ROLLER BEARINGS
BS AU 145d:1998 Specification for retroreflecting number plates
DEFSTAN 81-32/6(2012) : 2012 PACKAGING OF BALL AND ROLLER BEARINGS
I.S. EN 14865-1:2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
DEFSTAN 80-208/3(2005) : 2005 PAINT FINISHING, POLYURETHANE MULTI-PACK, MATT, IRR, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC
BS 4948:1994 Method for assessment of the visible soiling by body contact of upholstery fabrics
BS 6949:1991 Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS 7664:2000 Specification for undercoat and finishing paints
BS 9210:1984 Specification for radio frequency connectors of assessed quality: generic data and methods of test
BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water
BS 3488:1987 Specification for technical anhydrous lanolin
BS 8634:2017 Portable roof ladders. Specification
BS 3698:1964 Specification for calcium plumbate priming paints
DEFSTAN 05-43/1(1977) : 1977 STANDARD PROCEDURES FOR TAKING SAMPLES OF HYDRAULIC FLUIDS FOR EVALUATION OF PARTICULATE CONTAMINATION
DEFSTAN 81-62/4(2014) : 2014 PRESERVATION OF MECHANICAL POWER TRANSMISSION ASSEMBLIES
BS 3770:1964 Specification for zinc naphthenate and zinc naphthenate concentrates
03/321614 DC : DRAFT DEC 2003 PREN 14865-2 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
BS 7719:1994 Specification for water-borne emulsion paints for interior use
BS DD257-5(2003) : 2003 METHODS OF ANALYSIS OF WOOD PRESERVATIVES AND TREATED TIMBER - PART 5: DETERMINATION OF CARBOXYLIC ACID TYPE IN ZINC AND COPPER CARBOXYLATE PRESERVATIVE SOLUTIONS BY GAS CHROMATOGRAPHY
DEFSTAN 81-72/4(2015) : 2015 PRESERVATION OF CYLINDER BLOCKS (WITH OR WITHOUT PISTONS) AND CYLINDER HEADS
BS 3769:1964 Specification for copper naphthenate and copper naphthenate concentrates
BS EN 14865-1 : 2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
BS AU 217-2:1989 Maximum road speed limiters for motor vehicles Specification for system and component requirements
DEFSTAN 81-56/3(2004) : 2004 PACKAGING OF PISTONS, ASSEMBLED OR UNASSEMBLED AND PISTON SETS
SAE AMS 03-2 : 2017 CLEANING AND PREPARATION OF METAL SURFACES
DIN ISO 11009 E : 2007 PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF WATER WASHOUT CHARACTERISTICS OF LUBRICATING GREASES
DEFSTAN 80-104/1(1985) : 1985 VARNISH OIL BITUMEN, UNPIGMENTED, TYPE QX (RD 1219), SOFT, TYPE QX (1322), PIGMENTED, TYPE QX (RD 1229)
DEFSTAN 81-041(PT2)/9(2017) : 2017 PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
BS 2087-1:1992 Preservative textile treatments Specification for treatments
BS 598-107:2004 Sampling and examination of bituminous mixtures for roads and other paved areas Method of test for the determination of the composition of design surface course rolled asphalt
BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test)
BS 3900-G6:1989 Methods of test for paints Assessment of resistance to fungal growth
BS ISO 8829-2:2006 Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Non-metallic braid
BS 3900-E8:1974 Methods of test for paints Resistance to impact (pendulum test)
BS 5666-5:1986 Methods of analysis of wood preservatives and treated timber Determination of zinc naphthenate in preservative solutions and treated timber
BS G184-G188(1964) : 1964 AMD 4738 SPECIFICATION FOR ALUMINIUM TERMINAL ENDS AND IN LINE CONNECTORS FOR HEXAGONAL CRIMPING TO AIRCRAFT ALUMINIUM ELECTRICAL CABLES
BS 9564:1980 Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 7773:1995 Code of practice for cleaning and preparation of metal surfaces
DEFSTAN 81-72/2(2003) : 2003 PRESERVATION OF CYLINDER BLOCKS (WITH OR WITHOUT PISTONS) AND CYLINDER HEADS
DEFSTAN 81-56/4(2010) : 2010 PACKAGING OF PISTONS, ASSEMBLED OR UNASSEMBLED AND PISTON SETS
DEFSTAN 05-50(PT3)/1(1986) : 1986 METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 3: TOTAL SOLIDS CONTENT BY EVAPORATION
ISO 8829-2:2006 Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 2: Non-metallic braid
DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
EN 14865-1:2009+A1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
DEFSTAN 79-9/3(2006) : 2006 POLISH METAL (LIQUID)
DIN EN 14865-1:2011-01 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010)
BS ISO 8829-1:2009 Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies Metallic (stainless steel) braid
DEFSTAN 81-55/3(1996) : 1996 PACKAGING OF MECHANICAL COMPONENTS
ISO 8829-1:2009 Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 1: Metallic (stainless steel) braid
DEFSTAN 81-55/4(2003) : 2003 PACKAGING OF MECHANICAL COMPONENTS
DEFSTAN 80-217/1(2002) : 2002 CORROSION PREVENTIVE COMPOUND: SOFT FILM, COLD APPLICATION NATO CODE: C-614 JOINT SERVICES DESIGNATION: PX-1
BS 598-107:1990 Sampling and examination of bituminous mixtures for roads and other paved areas Method of test for the determination of the composition of design wearing course rolled asphalt
DEFSTAN 68-151/2(2001) : 2001 CLEANING SOLVENT, EMULSIFIABLE, SPECIAL
DEFSTAN 81-32/4(1996) : 1996 PACKAGING OF BALL AND ROLLER BEARINGS
DEFSTAN 81-041(PT5)/8(2017) : 2017 PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES
BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H

BS 4715(1972) : LATEST METHOD FOR THE DETERMINATION OF ANILINE POINT OF PETROLEUM PRODUCTS
BS 4351(1979) : LATEST METHOD FOR THE DETECTION OF COPPER CORROSION FROM PETROLEUM PRODUCTS BY THE COPPER STRIP TARNISH TEST
BS 188(1957) : LATEST DETERMINATION OF THE VISCOSITY OF LIQUIDS
BS 4349(1979) : LATEST METHOD FOR THE DETERMINATION OF DISTILLATION OF PETROLEUM PRODUCTS
BS 612:1966 Specification for Nessler cylinders
BS 4712(1971) : LATEST METHOD FOR DETERMINATION OF HYDROCARBON TYPES IN LIQUID PETROLEUM PRODUCTS BY FLUORESCENT INDICATOR ADSORPTION
ISO 1250:1972 Mineral solvents for paints White spirits and related hydrocarbon solvents
BS 4726(1971) : LATEST
BS 4348:1976 Determination of existent gum in fuels by jet evaporation
BS 4708(1971) : LATEST METHOD FOR DETERMINATION OF VISCOSITY OF TRANSPARENT AND OPAQUE LIQUIDS(KINEMATIC AND DYNAMIC VISCOSITIES)

View more information
US$143.74
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.