BS 2648:1955
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
12-29-1955
NO CONTENTS SECTION
Limits and test methods for temperature variation, fluctuation, drift and overshot, ventilation rate, for ovens for moisture determination by drying wiithin range 95°C to 110°C. Ovens about 1 to 3 cu ft internal space ventilated by convection, with or without fans; vacuum or forced draught ovens not covered.
This British Standard specifies the performance requirements of electrically-heated laboratory ovens of the type used for the determination of moisture by drying within the temperature range 95 °C to 110 °C, and having external provision for manual adjustment to any desired temperature within that range. Ovens having a wider temperature range are not excluded provided they comply with the other requirements of this standard.
The standard applies to ovens with an internal space of about 1 to 3 cu. ft which are ventilated by convection, whether or not they are fitted with internal fans to assist the circulation of air; it does not apply to vacuum ovens or to forced draught ovens.
| Committee |
EPL/66
|
| DevelopmentNote |
Reviewed and confirmed by BSI, December 2011. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| BS 2782-10:Method 1006:1978 | Methods of testing plastics. Glass reinforced plastics Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric |
| BS 5072-2:1974 | Methods of test for sodium fluoride for industrial use Determination of moisture content |
| BS 1881-5:1970 | Testing concrete Methods of testing hardened concrete for other than strength |
| BS DD232(1996) : 1996 | METHOD FOR DETERMINATION OF THE MAXIMUM BINDER CONTENT OF BITUMINOUS MIXTURES WITHOUT EXCESSIVE BINDER DRAINAGE |
| BS 4317-16:1981 | Methods of test for cereals and pulses Determination of dry gluten in wheat flour |
| BS 5911-103:1994 | Precast concrete pipes, fittings and ancillary products Specification for prestressed non-pressure pipes and fittings with flexible joints |
| BS 4309:1968 | Methods of measuring the performance of laboratory electric resistance furnaces |
| BS 6F 100:1998 | Procedure for inspection and testing of textiles for aerospace purposes |
| BS 6215-2:1981 | Methods of test for agricultural food products Determination of crude fibre content (modified Scharrer method) |
| BS 5911-230:1994 | Precast concrete pipes, fittings and ancillary products Specification for road gullies and gully cover slabs |
| BS 5350-D4:1976 | Methods of test for adhesives. Adhesively bonded joints: environmental tests Determination of staining potential |
| DEFSTAN 80-154/3(2006) : 2006 | ADHESIVE, NATURAL RUBBER-RESIN |
| DEFSTAN 80-149/3(2006) : 2006 | ADHESIVE, CONTACT, WATER-BORNE (TYPE 1 AND TYPE 2) |
| BS 2782-4:Method 452C:1979 | Methods of testing plastics. Chemical properties Determination of butyl rubber content of low density polyethylene compounds |
| BS 2782-1:Methods 131C and 131D:1978 | Methods of testing plastics. Thermal properties Crushing strength after heating (heat resistance) of thermosetting moulding material. Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings |
| BS 2F 134:2002 | Continuous filament polyester sewing thread suitable for aerospace purposes |
| BS 5409-2:1978 | Specification for nylon tubing Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
| BS 6515:1984 | Specification for polyethylene damp-proof courses for masonry |
| BS 5409-1:1976 | Specification for nylon tubing Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations |
| BS 4F 120:1993 | Specification for continuous filament nylon sewing threads for aerospace purposes |
| BS 2782-4:Method 451B:1978 | Methods of testing plastics. Chemical properties Determination of acetone-soluble matter in phenolic moulding materials after moulding |
| BS 6398:1983 | Specification for bitumen damp-proof courses for masonry |
| BS 1743:1968 | Methods for analysis of dried milk and dried milk products |
| BS 6455:1984 | Method for monitoring the levels of residual solvents in flexible packaging materials |
| BS 4938-2:1982 | Dirt content of milk Method for the determination of visible dirt content (rapid method) |
| BS 2499-3:1993 | Hot-applied joint sealant systems for concrete pavements Methods of test |
| BS 4072:1999 | Copper/chromium/arsenic preparations for wood preservation |
| BS 7263-1:1994 | Precast concrete flags, kerbs, channels, edgings and quadrants Specification |
| BS 5215:1986 | Specification for one-part gun grade polysulphide-based sealants |
| BS 1309:1974 | Methods of sampling and chemical testing of leather |
| BS 5911-200:1994 | Precast concrete pipes, fittings and ancillary products Specification for unreinforced and reinforced manholes and soakaways of circular cross section |
| BS 3921:1985 | Specification for clay bricks |
| BS 3712-1:1991 | Building and construction sealants Methods of test for homogeneity, relative density and penetration |
| BS 4254:1983 | Specification for two-part polysulphide-based sealants |
| BS 2472:1966 | Methods for the chemical analysis of ice cream |
| BS 757:1975 | Methods for sampling and testing gelatine (physical and chemical methods) |
| BS 1377:1975 | Methods of test for soils for civil engineering purposes |
| BS 770-2:1976 | Methods for chemical analysis of cheese Determination of water content (reference and routine methods) |
| BS 4401-4:1970 | Methods of test for meat and meat products Determination of total fat content |
| BS 2782-4:Method 454D:1978 | Methods of testing plastics. Chemical properties Determination of volatile matter (including water) of PVC resins |
| BS 7542:1992 | Method of test for curing compounds for concrete |
| BS 6248-8:1982 | Caseins and caseinates Method for determination of water content (reference method) |
| BS 5272:1975 | Method for simultaneous routine determination of the water contents of a batch of dried milk samples |
| BS 5072-1:1974 | Methods of test for sodium fluoride for industrial use Determination of water-insoluble matter |
| BS 5F 120:2002 | Continuous filament nylon sewing threads for aerospace purposes |
| BS 5270-1:1989 | Bonding agents for use with gypsum plasters and cement Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters |
| BS 1881-122:1983 | Testing concrete Method for determination of water absorption |
| BS 5911-2:1982 | Precast concrete pipes, fittings and ancillary products Specification for inspection chambers |
| BS 5212-3:1990 | Cold applied joint sealant systems for concrete pavements Methods of test |
| BS 1016-1:1973 | Methods for analysis and testing of coal and coke Total moisture of coal |
| BS 3712-2:1973 | Building and construction sealants Methods of test for seepage, staining, shrinkage, shelf life and paintability |
| BS 5350-B2:1976 | Methods of test for adhesives. Adhesives Determination of solids content |
| BS 2782-4:Method 451A:1978 | Methods of testing plastics. Chemical properties Determination of acetone-soluble matter in phenolic mouldings |
| BS 593:1954 | Specification for laboratory thermometers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.