BS EN 1991-2 NA : 2003
|
UK NATIONAL ANNEX TO EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES
|
BS EN 12878:2014
|
Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
|
BS EN 771-3 : 2011
|
SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES)
|
BS EN ISO 12957-1:2005
|
Geotextiles. Determination of friction characteristics Direct shear test
|
BS EN ISO 12958:2010
|
Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
|
BS EN ISO 10321:2008
|
Geosynthetics. Tensile test for joints/seams by wide-width strip method
|
BS EN ISO 22475-1:2006
|
Geotechnical investigation and testing. Sampling methods and groundwater measurements Technical principles for execution
|
BS EN ISO 9001:2015
|
Quality management systems. Requirements
|
BS EN 13738:2004
|
Geotextiles and geotextile-related products. Determination of pullout resistance in soil
|
BS 1377-7:1990
|
Methods of test for soils for civil engineering purposes Shear strength tests (total stress)
|
DD ISO/TS 13434:2008
|
Geosynthetics. Guidelines for the assessment of durability
|
BS EN 1997-2:2007
|
Eurocode 7. Geotechnical design Ground investigation and testing
|
BS 4164:2002
|
Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
|
PD 6694-1:2011
|
Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004
|
BS EN ISO 9862:2005
|
Geosynthetics. Sampling and preparation of test specimens
|
BS EN 10025-2:2004
|
Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels
|
BS EN ISO 10319:2015
|
Geosynthetics. Wide-width tensile test
|
BS 1377-9:1990
|
Methods for test for soils for civil engineering purposes In-situ tests
|
BS 4449(2005) : 2005
|
STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION
|
BS EN ISO 10320:1999
|
Geotextiles and geotextile-related products. Identification on site
|
BS 1377-3:1990
|
Methods of test for soils for civil engineering purposes Chemical and electro-chemical tests
|
BS EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
|
BS EN 1997-1 NA : 2004
|
UK NATIONAL ANNEX TO EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
|
BS EN 12225:2000
|
Geotextiles and geotextile-related products. Method for determining the microbiological resistance by a soil burial test
|
BS EN 1997-1 : 2004
|
EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
|
BS EN 2569:1991
|
Control cable fittings and turnbarrels. Technical specification
|
BS 3692:2001
|
ISO metric precision hexagon bolts, screws and nuts. Specification
|
BS EN ISO 14688-2 : 2004
|
GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PRINCIPLES FOR A CLASSIFICATION
|
BS EN 14475:2006
|
Execution of special geotechnical works. Reinforced fill
|
BS EN 1998-5:2004
|
Eurocode 8. Design of structures for earthquake resistance Foundations, retaining structures and geotechnical aspects
|
BS 1377-8:1990
|
Methods of test for soils for civil engineering purposes Shear strength tests (effective stress)
|
BS EN 1990:2002+A1:2005
|
Eurocode. Basis of structural design
|
NFP 94 270 : 2009
|
GEOTECHNICAL DESIGN - RETAINING STRUCTURES - REINFORCED AND SOIL NAILING STRUCTURES
|
PD ISO/TR 20432:2007
|
Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
|