Committees responsible
Foreword
Code of practice
Section 1. General
1.1 Scope
1.2 References
1.3 Definitions
1.4 Symbols and units
1.5 Safety
Section 2. UK statutory requirements and guidance
2.1 General
2.2 Regulations
2.3 Guidance notes
2.4 Landfalls
2.5 International pipelines
2.6 Works Authorization
Section 3. Quality assurance
3.1 General
3.2 Quality definitions
3.3 Quality plans
3.4 Design quality assurance
3.5 Materials quality assurance
3.6 Construction quality assurance
3.7 Specialized activities
3.8 Records and document control
Section 4. Design
4.1 Design approach
4.2 Design of steel pipelines
4.3 Design of flexible pipelines
4.4 Bundles and multiple pipelines
4.5 Stability
4.6 Spanning pipelines
4.7 Pipeline and cable crossings
4.8 Landfalls
4.9 Tie-ins and risers
4.10 J-tubes and sleeves
4.11 Subsea connections and valves
4.12 Protection consideration
4.13 Pipeline shutdown systems
Section 5. Pipeline materials
5.1 Steel systems
5.2 Flexible pipes and hoses
Section 6. Pipeline fittings and equipment
6.1 General
6.2 Flanged connections
6.3 Valves
6.4 Other pipeline fittings
6.5 Bends made from pipe
6.6 Pig traps and closures
6.7 Slug catchers
6.8 Other pressure-containing parts
Section 7. Corrosion
7.1 Corrosion control design approach
7.2 Material corrosion and erosion
7.3 Non-metallic coatings and linings
7.4 Metallic coatings and claddings
7.5 Corrosion inhibitors
7.6 Internal corrosion monitoring
7.7 Cathodic protection
Section 8. Weight coating, insulating and buoyancy
materials
8.1 Weight coating design considerations
8.2 Weight coating materials
8.3 Weight coating application
8.4 Storage and handling
8.5 Damage
8.6 Insulating materials
Section 9. Jointing
9.1 Jointing
9.2 Welding
9.3 Special welding methods
9.4 Weld inspection
9.5 Hyperbaric (dry habitat) welding
9.6 Non-welded joints
9.7 Other relevant British Standards
Section 10. Installation
10.1 General
10.2 Marine operations
10.3 Vessel positioning
10.4 Pipeline installation
10.5 Span rectification
10.6 Pipeline crossings
10.7 Pipeline tie-ins
10.8 Landfall
10.9 Pipeline protection
10.10 Flooding and gauging
10.11 As-built survey
Section 11. Pressure testing
11.1 General
11.2 Safety
11.3 Equipment
11.4 Test pressure
11.5 Test procedure
11.6 Test acceptance criteria
11.7 Test records
11.8 Pre-testing of fabricated components
11.9 Integrity leak testing
11.10 Tie-in welds
11.11 Flexible pipelines
Section 12
12.1 General
12.2 Disposal of pipeline content
12.3 Cleaning
12.4 Drying
12.5 Introduction of product
12.6 Connections to operating pipelines
Annexes
A (normative) Notation
B (normative) Environmental considerations
C (normative) Buckling
Tables
1 Design factors fd
2 Energy reduction factor for subsize specimens
3 Parent material impact testing temperature
4 Monitoring methods
5 Fishing equipment
6 Welded reinforcement
7 Inspection techniques and typical standards
B.1 Typical effective coefficients of friction for
       North Sea applications
Figures
1 Fatigue life, constant C for stress variations
2 Two-dimensional stability analysis approach
3 Three-dimensional stability analysis approach
4 Measurement of air content
B.1 Area to be investigated when calculating the
       shock pressure
List of references