Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-08-2003

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 General design
  4.2 Connection threads
  4.3 Signal processing and indication
  4.4 System delay
  4.5 Function at ambient temperatures
  4.6 Internal pressure
  4.7 Strength
  4.8 Operational reliability
  4.9 Corrosion
  4.10 Stress corrosion
  4.11 Vibration
  4.12 Pneumatic energy supply using pilot containers
  4.13 Operating force
  4.14 Functional reliability
  4.15 Safety classification
  4.16 Test facility
  4.17 Documentation
5 Tests
  5.1 Test conditions
  5.2 Test samples and order of tests
  5.3 Compliance
  5.4 Function
  5.5 System delay
  5.6 Temperature
  5.7 Internal pressure
  5.8 Strength
  5.9 Operational reliability
  5.10 Corrosion
  5.11 Stress corrosion
  5.12 Vibration
  5.13 Energy supply
  5.14 Operating force
  5.15 Functional reliability
6 Marking and data
7 Evaluation of conformity
  7.1 General
  7.2 Initial type testing
  7.3 Factory production control (FPC)
Annex ZA (informative) Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Directive
Bibliography

Covers requirements and test methods for non-electrical automatic control devices incorporating non-electrical delay devices for CO[2], inert gas- or halo-carbon-gas fire extinguishing systems.

This European Standard specifies requirements and test methods for non-electric automatic control devices incorporating non-electric delay devices for CO2, inert gas- or halo-carbon-gas fire extinguishing systems. This standard is applicable for devices which may be triggered by: - an automatic fire detection installation; - an electrical control device; - a non-electrical special fire detector; - a manual triggering device or; - a combination of the above.

Committee	FSH/18/6
DevelopmentNote	Supersedes 99/540208 DC (09/2003)
DocumentType	Standard
Pages	30
PublisherName	British Standards Institution
Status	Current
Supersedes	99/540208 DC : DRAFT MAR 1999

Standards	Relationship
NF EN 12094-2 : 2003	Identical
NBN EN 12094-2 : 2003	Identical
SN EN 12094-2 : 2003	Identical
UNE-EN 12094-2:2004	Identical
UNI EN 12094-2 : 2004	Identical
EN 12094-2:2003	Identical
NS EN 12094-2 : 1ED 2003	Identical
I.S. EN 12094-2:2003	Identical
NEN EN 12094-2 : 2003	Identical
DIN EN 12094-2:2003-09	Identical

93/68/EEC : 1993 AMD 2 1998	COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
ISO/IEC 17025:2005	General requirements for the competence of testing and calibration laboratories
89/686/EEC : 1989 AMD 5 2012	COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
EN 12094-9:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
89/106/EEC : 1988	COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
1989/336/EEC : 1989	COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
EN 12094-10:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
EN 45011:1998	General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
1990/384/EEC : 1990	COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS
1988/378/EEC : 1988	COUNCIL DIRECTIVE OF 3 MAY 1988 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING THE SAFETY OF TOYS
EN 45011 : 1998	GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
1973/23/EEC : 1973	COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
EN ISO 228-1:2003	Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 7-1:1994	Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 12094-11 : 2003	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES
ISO 9001:2015	Quality management systems — Requirements
IEC 60068-2-42:2003	Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
92/42/EEC : 1992 AMD 5 2013	COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS
ISO/IEC Guide 65:1996	General requirements for bodies operating product certification systems
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 54-1:2011	Fire detection and fire alarm systems - Part 1: Introduction
ISO 228-1:2000	Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
1987/404/EEC : 1987	COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
1990/396/EEC : 1990	COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS

View more information

US$237.18

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

BS EN 12094-2:2003

Current

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription