• There are no items in your cart

BS EN 12101-10:2005

Current
Current

The latest, up-to-date edition.

Smoke and heat control systems Power supplies
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-01-2006

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
   3.1 Terms and definitions
   3.2 Abbreviations
4 General requirements (electrical)
   4.1 General
   4.2 Batteries
   4.3 Generator sets
5 General requirements (pneumatic)
   5.1 General
   5.2 Power sources
6 Functions
   6.1 Power supply from the primary power source (electrical)
   6.2 Power supply from the secondary power source (battery)
   6.3 Power supply from the secondary power source (generators)
   6.4 Recognition and indication of faults (electrical)
   6.5 Power supply from compressed gases
7 Materials, design and manufacture
   7.1 Mechanical design
   7.2 Electrical design
8 Classification
9 Documentation
   9.1 User's documentation
   9.2 Design documentation
10 Marking
   10.1 General
   10.2 Gas bottles
11 General test requirements
   11.1 Standard atmospheric conditions for testing
   11.2 Mounting and orientation
   11.3 Electrical connection
   11.4 Selection of tests
12 Tests
   12.1 Electrical functional test
   12.2 Pneumatic functional test
   12.3 Test of the charger and the secondary power source
   12.4 Cold (operational)
   12.5 Damp heat, steady state (operational)
   12.6 Impact (operational)
   12.7 Vibration, sinusoidal (operational)
   12.8 Damp heat, steady state (endurance)
   12.9 Vibration, sinusoidal (endurance)
   12.10 Dry heat (operational)
   12.11 SO[2] corrosion
   12.12 Salt spray testing
   12.13 Protection against water
   12.14 Protection against solid foreign objects
   12.15 EMC immunity tests (operational)
13 Evaluation of conformity
   13.1 General
   13.2 Initial type testing
   13.3 Factory production control (FPC)
Annex A (informative) Summary of functions
Annex ZA (informative) Clauses of this European Standard addressing
         the provisions of the EU Construction Products Directive
      ZA.1 Scope and relevant characteristics
      ZA.2 Procedure for attestation of conformity of power supply
           equipment
           ZA.2.1 System of attestation of conformity
           ZA.2.2 EC Certificate and Declaration of conformity
      ZA.3 CE marking and labelling

Describes requirements and gives test methods for primary and secondary electrical and pneumatic power supply equipment, designed for use in smoke and heat control systems in buildings. It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard.

This European Standard specifies requirements and gives test methods for primary and secondary electrical and pneumatic power supply equipment, designed for use in smoke and heat control systems in buildings. It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard.

NOTE A summary of functions is given in Annex A.

Committee
FSH/25
DevelopmentNote
Supersedes 03/117188 DC. (03/2006)
DocumentType
Standard
Pages
54
PublisherName
British Standards Institution
Status
Current
Supersedes

BS PAS 121(2007) : 2007 SPECIFICATION FOR ACTIVE FIRE CURTAIN BARRIER ASSEMBLIES AND ACTIVE FIRE CURTAIN BARRIER ASSEMBLIES WITH SMOKE RATING
BS 7346-8:2013 Components for smoke control systems Code of practice for planning, design, installation, commissioning and maintenance
BS 8524-1:2013 Active fire curtain barrier assemblies Specification
BS 7346-7:2006 Components for smoke and heat control systems Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks
BS 8524-2:2013 Active fire curtain barrier assemblies Code of practice for application, installation and maintenance
BS 8519:2010 Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice
12/30205676 DC : 0 BS 8524-2 - ACTIVE FIRE CURTAIN BARRIER ASSEMBLIES - PART 2: CODE OF PRACTICE
06/30112774 DC : DRAFT APR 2006 BS 7346-7 - COMPONENTS FOR SMOKE AND HEAT CONTROL SYSTEMS - PART 7: CODE OF PRACTICE ON FUNCTIONAL RECOMMENDATIONS AND CALCULATION METHODS FOR SMOKE AND HEAT CONTROL SYSTEMS FOR COVERED CAR PARKS
13/30266935 DC : 0 BS 7346-8 - COMPONENTS FOR SMOKE CONTROL SYSTEMS - PART 8: CODE OF PRACTICE FOR PLANNING, DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE
BS 7346-7:2013 Components for smoke and heat control systems Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks

EN 13293:2002 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
ISO 8528-3:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets
ISO 8528-2:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 1964-1:1999/AC:1999 TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA
ISO 8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 8528-5:2013 Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets
ISO 8528-4:2005 Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear
ISO 8528-12:1997 Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services
ISO 8528-10:1998 Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method
EN ISO 6988:1994 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)
ISO 8573-1:2010 Compressed air Part 1: Contaminants and purity classes
EN 12205:2001 Transportable gas cylinders - Non refillable metallic gas cylinders
IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 9001:2015 Quality management systems — Requirements
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO 8528-7:2017 Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design
ISO 8528-1:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 50130-4:2011/A1:2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 6988:1985 Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture
IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
EN 286-1:1998/A2:2005 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 60068-2-47:2005 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.