• There are no items in your cart

BS EN 12811-2:2004

Current
Current

The latest, up-to-date edition.

Temporary works equipment Information on materials
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-18-2004

1 Scope
2 Normative references
3 General
  3.1 Selection of materials
  3.2 Characteristic values
  3.3 Inspection documents
  3.4 Effects of fabrication
4 Steel
  4.1 General
  4.2 Dimensions, mass and tolerance
  4.3 Fracture toughness
  4.4 Steel grades in EN 10142
5 Cast iron
  5.1 General
  5.2 Prototype testing
  5.3 Inspection document
6 Aluminium alloys
  6.1 General
  6.2 Dimensions, mass and tolerance
  6.3 Heat affected zones
  6.4 Inspection document
7 Timber and timber based materials
  7.1 General
  7.2 Solid timber and glued laminated timber
      7.2.1 General
      7.2.2 Characteristic values
      7.2.3 Dimensions, mass and tolerance
  7.3 Wood-based materials (plywood, particleboard,
      fibreboard)
      7.3.1 General
8 Protection against corrosion and deterioration
  8.1 Ferrous metal products
  8.2 Aluminium alloys
  8.3 Plywood for scaffold decks
9 Welding
Annex A (informative) Information taken from other
        material and design standards
Bibliography

Covers guidance on where to find information on materials often used in temporary works.

This European Standard provides guidance on where to find information on materials often used in temporary works. It draws attention to a number of points that a designer should take into account.

The information given is limited to commonly used steel, aluminium alloys, cast iron, timber and timber based materials.

Requirements are also given for welding, for limiting corrosion and other deterioration.

It is limited to the selection of types and grades of material from standards, which are either international or European Standards.

Committee
B/514
DevelopmentNote
Supersedes 01/104222 DC (09/2004)
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 1139-2.2(2009) : 2009 METAL SCAFFOLDING - PART 2: COUPLERS AND FITTINGS - SECTION 2.2: COUPLERS AND FITTINGS OUTSIDE THE SCOPE OF BS EN 74 - REQUIREMENTS AND TEST METHODS
BS 1139-6:2014 Metal scaffolding Prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems. Specification
BS 6187:2011 Code of practice for full and partial demolition
07/30163355 DC : 0 BS 1991-1-6 - UK NATIONAL ANNEX TO EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION
11/30153572 DC : 0 BS 6187 - CODE OF PRACTICE FOR DEMOLITION AND PARTIAL DEMOLITION, INCLUDING FOR STRUCTURAL REFURBISHMENT
09/30150058 DC : 0 BS 1139-2.2 - METAL SCAFFOLDING - PART 2: COUPLERS - SECTION 2.2: ALUMINIUM COUPLERS AND SPECIAL COUPLERS IN STEEL - REQUIREMENTS AND TEST METHODS
16/30327082 DC : DRAFT MAR 2016 BS 8620 - LOW-LEVEL WORK PLATFORM WITH ONE WORKING PLATFORM WITH SIDE PROTECTION FOR USE BY ONE PERSON WITH A MAXIMUM WORKING PLATFORM HEIGHT NO GREATER THAN 2.5 M - SPECIFICATION
BS 8620:2016 Low level work platform with one working platform with side protection for use by one person with a maximum working platform height no greater than 2.5 m. Specification
12/30235507 DC : 0 BS 8560 - CODE OF PRACTICE FOR THE DESIGN OF BUILDINGS INCORPORATING SAFE WORKING AT HEIGHT
BS PAS 250(2012) : 2012 LOW-LEVEL WORK PLATFORM WITH ONE WORKING PLATFORM WITH SIDE PROTECTION FOR USE BY ONE PERSON WITH A MAXIMUM WORKING PLATFORM HEIGHT OF LESS THAN 2.5 M - SPECIFICATION
14/30286613 DC : 0 BS 1139-6 - METAL SCAFFOLDING - PART 6: PREFABRICATED TOWER SCAFFOLDS OUTSIDE THE SCOPE OF BS EN 1004, BUT UTILIZING COMPONENTS FROM SUCH SYSTEMS - SPECIFICATION
BS PAS 51(2004) : 2004 GUIDE TO INDUSTRY BEST PRACTICE FOR ORGANIZING OUTDOOR EVENTS

EN 10113-2 : 1993 HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS
EN 1194:1999 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
EN 729-2 : 1994 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - COMPREHENSIVE QUALITY REQUIREMENTS
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
EN 39:2001 Loose steel tubes for tube and coupler scaffold - Technical delivery conditions
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 485-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 719 : 1994 WELDING COORDINATION - TASKS AND RESPONSIBILITIES
EN 1562:2012 Founding - Malleable cast irons
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
EN 390:1994 Glued laminated timber - Sizes - Permissible deviations
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
ENV 1999-1-1 : 1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
EN 287-2:1992/A1:1997 APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 336:2013 Structural timber - Sizes, permitted deviations
EN 729-1 : 1994 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - GUIDELINES FOR SELECTION AND USE
EN 386:2001 Glued laminated timber - Performance requirements and minimum production requirements
EN 1179:2003 Zinc an zinc alloys - Primary zinc
EN 408:2010+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 10204:2004 Metallic products - Types of inspection documents
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN 338:2016 Structural timber - Strength classes
EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
ENV 1993-1-3:1996/AC:1997 EUROCODE 3: DESIGN OF STEEL STRUCTURES - GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 729-3 : 1994 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
EN 1193 : 1997 TIMBER STRUCTURES - STRUCTURAL TIMBER AND GLUED LAMINATED TIMBER - DETERMINATION OF SHEAR STRENGTH AND MECHANICAL PROPERTIES PERPENDICULAR TO THE GRAIN
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.