• There are no items in your cart

BS EN 14140:2014

Current
Current

The latest, up-to-date edition.

LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-30-2015

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Tests and examinations
8 Technical requirements for type approval
9 Initial inspection and tests
10 Marking
11 Documentation
12 Certification
Annex A (normative) - Additional manufacturers markings
Annex B (informative) - Over-moulded cylinder
Annex C (informative) - Hot Air Balloon Cylinders
Annex D (informative) - Environmental checklist
Bibliography

Describes the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 degree C to +65 degree C.

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5l up to and including 150l, exposed to temperatures of -20°C to+65°C. It allows alternative design and construction methods to those required in EN1442 , including coated cylinders, over-moulded cylinders and cylinders for hot air balloons. This European Standard applies only to pressure receptacles with a circular cross-section. This European Standard does not include the equipping of the cylinders with valves and other service equipment.

Committee
PVE/19
DevelopmentNote
Supersedes 01/708614 DC (10/2003) Supersedes 12/30248681 DC. (12/2014)
DocumentType
Standard
Pages
64
PublisherName
British Standards Institution
Status
Current
Supersedes

ISO 17636-1:2013 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
EN 10120:2017 Steel sheet and strip for welded gas cylinders
ISO 2812-2:2007 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
EN ISO 3231:1997 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)
EN ISO 5173:2010/A1:2011 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
ISO 14024:1999 Environmental labels and declarations Type I environmental labelling Principles and procedures
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
EN ISO 11117:2008/AC:2010 GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS - DESIGN, CONSTRUCTION AND TESTS
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
ISO 11363-1:2010 Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
EN ISO 11114-1:2012/A1:2017 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017)
ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN ISO 19232-2:2013 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)
EN 10272:2016 Stainless steel bars for pressure purposes
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
EN ISO 17639:2013 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
EN ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
ISO 15995:2006 Gas cylinders Specifications and testing of LPG cylinder valves Manually operated
ISO 17636-2:2013 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
ISO 17639:2003 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
EN 10204:2004 Metallic products - Types of inspection documents
EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
ISO 17637:2016 Non-destructive testing of welds Visual testing of fusion-welded joints
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
ISO 19232-2:2013 Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
ISO 2409:2013 Paints and varnishes Cross-cut test
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN 14717:2005 Welding and allied processes - Environmental check list
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)
ISO 11117:2008 Gas cylinders Valve protection caps and valve guards Design, construction and tests
ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
EN ISO 14245:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)

View more information
US$330.61
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.