• There are no items in your cart

BS EN 14598-3:2005

Current
Current

The latest, up-to-date edition.

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-25-2005

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 General
  4.2 Type and content of filler/reinforcement
  4.3 Recycling
  4.4 Property data
Bibliography

Describes the requirements for physical and chemical properties of Sheet moulding Compounds (SMC) and Bulk Moulding Compound (BMC) and compression or injection moulded specimens.

This part of prEN 14598 specifies the requirements for physical and chemical properties of Sheet moulding Compounds (SMC) and Bulk Moulding Compound (BMC) and compression or injection moulded specimens. The selection in this part is limited to those materials the composition and properties of which are significantly different. Furthermore the selection is limited to those materials which are of more general technical and / or economical importance. The properties which are used for the characterization of the moulding compounds, the test methods and the test conditions are based on part 2 of this standard. The list of properties is selected, initially, from those general test methods found in ISO 10350-1, Plastics - Acquisition and presentation of comparable single-point data - Part 1 : Moulding materials. The moulding compounds are divided into types corresponding to their composition and properties. The designation of the types of moulding compounds is based on part 1 \'Designation and basis for specifications\' of this standard.

Committee
PRI/42
DevelopmentNote
Supersedes 02/124520 DC (06/2005) Together with BS EN 14598-1 and BS EN 14598-2, it supersedes BS 5734-1(1990), BS 5734-2(1990), BS 5734-3(1990) and BS 5734-4(1990). (07/2005)
DocumentType
Standard
Pages
24
PublisherName
British Standards Institution
Status
Current
Supersedes

08/30142158 DC : DRAFT NOV 2008 BS 5834-2 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR GAS AND UTILITIES' PURPOSES - PART 2: SPECIFICATION FOR SURFACE BOXES
BS 5834-2:2011 Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
ISO 10350-2:2011 Plastics Acquisition and presentation of comparable single-point data Part 2: Long-fibre-reinforced plastics
ISO 6603-2:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
EN ISO 14126:1999/AC:2002 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
ISO 3167:2014 Plastics Multipurpose test specimens
ISO 8605:2001 Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
IEC 60695-2-1:1991 Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance
ISO 527-4:1997 Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
IEC 60250:1969 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
EN ISO 527-4:1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
EN ISO 10724-1 : 2001 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 1: GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
ISO 2039-1:2001 Plastics Determination of hardness Part 1: Ball indentation method
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
ISO 11359-2:1999 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
EN ISO 2818:1996 PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
EN 60707 : 1999 FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN 60112 : 2003 AMD 1 2009 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
ISO 1268-10:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
ISO 1268-8:2004 Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
IEC 60707:1999 Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
ISO 2577:2007 Plastics Thermosetting moulding materials Determination of shrinkage
EN ISO 11667 : 1999 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
EN ISO 2039-1 : 2003 PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001)
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN ISO 12115 : 1997 FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE
EN 14598-2:2005/AC:2006 REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN ISO 295 : 2004 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
EN ISO 10724-2 : 2000 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES
EN ISO 1172:1998 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
EN ISO 14125:1998/A1:2011 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 14125:1998 Fibre-reinforced plastic composites Determination of flexural properties
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
ISO 2818:1994 Plastics — Preparation of test specimens by machining
ISO 899-1:2017 Plastics — Determination of creep behaviour — Part 1: Tensile creep
EN ISO 179-2:1999/A1:2012 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - INSTRUMENTED IMPACT TEST (ISO 179-2:1997/AMD 1:2011)
EN ISO 12114 : 1997 FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF CURE CHARACTERISTICS (ISO 12114:1997)
ISO 14126:1999 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 1268-11:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
ISO 12114:1997 Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
ISO 6721-1:2011 Plastics Determination of dynamic mechanical properties Part 1: General principles
ISO 178:2010 Plastics Determination of flexural properties
EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
ISO 10352:2010 Fibre-reinforced plastics Moulding compounds and prepregs Determination of mass per unit area
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO 10724-2:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates

View more information
US$237.18
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.