• There are no items in your cart

BS EN 14678-1:2013

Current
Current

The latest, up-to-date edition.

LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-31-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Type tests
6 Production tests
7 Documentation
8 Markings and signs
9 Packaging
Annex A (normative) - Classification of hazardous
        areas in and adjacent to the dispenser
Annex B (normative) - Vapour barriers
Annex C (informative) - Information on explosion
        protected equipment
Annex D (informative) - Environmental checklist
Annex E (informative) - Significant technical changes
        between this document and the previous edition
        of this European Standard
Annex ZA (informative) - Relationship between this
        European Standard and the Essential Requirements
        of EU Directive 94/9/EC
Bibliography

Describes the requirements for the design, manufacture, testing and marking of LPG dispensers for automotive LPG filling stations with a maximum allowable pressure of 25 bar (2 500 kPa), where the piping has a maximum DN 40 and any vessel fitted has a volume less than 2 litres.

This European Standard covers the requirements for the design, manufacture, testing and marking of LPG dispensers for automotive LPG filling stations with a maximum allowable pressure of 25 bar (2 500 kPa), where the piping has a maximum DN 40 and any vessel fitted has a volume less than 2 l.

This European Standard covers the requirements for the LPG parts in multi-fuel dispensers.

This European Standard does not cover dispensers with integral pumps.

This European Standard may also be used for piping greater than DN 40 and/or vessels greater than 2 l, but then the PED [20] should also be consulted.

This European Standard does not include any requirement for metering performance.

Committee
PVE/19
DevelopmentNote
Supersedes 03/107320 DC. (03/2006) Supersedes 10/30227671 DC. (04/2013)
DocumentType
Standard
Pages
42
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
UNE-EN 14678-1:2013 Identical
DIN EN 14678-1:2013-06 Identical
EN 14678-1:2013 Identical
I.S. EN 14678-1:2013 Identical
NEN EN 14678-1 : 2013 Identical
UNI EN 14678-1 : 2013 Identical
SN EN 14678-1:2013 Identical
NBN EN 14678-1 : 2013 Identical
NS EN 14678-1 : 2013 Identical
NF EN 14678-1 : 2013 Identical

IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
EN 50525-2-21:2011/AC:2013 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
CEN Guide 414:2017 Safety of machinery - Rules for the drafting and presentation of safety standards
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
IEC 60730-2-10:2006 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
ISO 14024:1999 Environmental labels and declarations Type I environmental labelling Principles and procedures
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
EN 13480-1:2017 Metallic industrial piping - Part 1: General
EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN ISO 11114-1:2012/A1:2017 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017)
EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
EN 589:2008+A1:2012 Automotive fuels - LPG - Requirements and test methods
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 14678-2:2007+A1:2012 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
EN ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 11114-2:2013 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 50525-2-51:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 837-1:1996/AC:1998 PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 60730-2-10:2007 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 60079-2:2014/AC:2015 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)

View more information
US$261.13
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.