• There are no items in your cart

BS EN 15342:2007

Current
Current

The latest, up-to-date edition.

Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-31-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Characterisation of PS recyclates
5 Quality assurance
Annex A (normative) Test Method for the determination
                    of bulk density
Bibliography

Specifies a method of specifying delivery condition characteristics for polystyrene (PS) recyclates.

This European Standard defines a method of specifying delivery condition characteristics for polystyrene (PS) recyclates. It gives the most important characteristics and associated test methods for assessing a single batch of PS recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PS to agree on specifications for specific and general applications. This standard does not cover the characterisation of plastics wastes. See EN 15347. This standard is applicable without prejudice to any existing legislation.

Committee
PRI/89
DevelopmentNote
Supersedes 05/30097553 DC. (02/2008)
DocumentType
Standard
Pages
16
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
NF EN 15342 : 2008 Identical
NEN EN 15342 : 2007 Identical
SN EN 15342 : 2008 Identical
EN 15342:2007 Identical
I.S. EN 15342:2007 Identical
NBN EN 15342 : 2008 Identical
DIN EN 15342:2008-02 Identical
NS EN 15342 : 1ED 2007 Identical
UNE-EN 15342:2008 Identical
DIN EN 15342 E : 2008 Identical

UNI 10667-10 : 2011 PLASTIC RAW-SECONDARY MATERIALS - POLYSTYRENE FOR GENERAL PURPOSES, FROM THE RECYCLING OF INDUSTRIAL RESIDUES AND/OR FROM PRE AND/OR POST-CONSUMER MATERIALS - PART 10: REQUIREMENTS AND TEST METHODS
ISO 1622-1:2012 Plastics Polystyrene (PS) moulding and extrusion materials Part 1: Designation system and basis for specifications
EN ISO 2897-1 : 1999 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 1043-3 : 1999 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016)
ISO 3451-1:2008 Plastics Determination of ash Part 1: General methods
EN ISO 180:2000/A2:2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
EN ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 3451-1:2008 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008)
ISO 11469:2016 Plastics — Generic identification and marking of plastics products
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
ISO 2897-1:1997 Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 1: Designation system and basis for specifications
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN ISO 1043-4:1999/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998/AMD 1:2016)
ASTM D 5676 : 1999 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)
ISO 472:2013 Plastics Vocabulary
ISO 180:2000 Plastics Determination of Izod impact strength
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
ISO 9001:2015 Quality management systems — Requirements
ISO 1043-3:2016 Plastics Symbols and abbreviated terms Part 3: Plasticizers
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
EN ISO 1622-1:2012 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
EN ISO 1133:2005 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
EN ISO 179-2:1999/A1:2012 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - INSTRUMENTED IMPACT TEST (ISO 179-2:1997/AMD 1:2011)
ISO 1043-2:2011 Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
ISO 178:2010 Plastics Determination of flexural properties
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
ISO 1043-4:1998 Plastics Symbols and abbreviated terms Part 4: Flame retardants
ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
EN 12099:1997 Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
ASTM D 5577 : 1994 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.