BS EN 1563:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Founding. Spheroidal graphite cast irons
Hardcopy , PDF
09-08-2018
English
01-31-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Order information
6 Manufacture
7 Requirements
8 Sampling
9 Test methods
10 Retests
11 Inspection documentation
Annex A (informative) - Additional information on solid
solution strengthened ferritic spheroidal graphite
cast irons
Annex B (informative) - Guidance values for mechanical
properties measured on test pieces machined
from samples cut from the castings
Annex C (informative) - Guidance values for hardness
Annex D (informative) - Nodularity
Annex E (informative) - Additional information on mechanical
and physical properties
Annex F (informative) - Fracture toughness, impact energy and
ductility of spheroidal graphite cast irons
Annex G (normative) - Sectioning procedure for cast samples
Annex H (informative) Comparison of spheroidal graphite cast
iron material designations according to EN 1560 [1]
and ISO/TR 15931 [24]
Annex I (informative) - Un-notched impact test
Annex J (informative) - Significant technical changes between
this European Standard and the previous edition
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EC Directive 97/23/EC
Bibliography
Defines the grades and the corresponding requirements for spheroidal graphite cast irons.
This European Standard defines the grades and the corresponding requirements for spheroidal graphite cast irons.
This European Standard specifies 2 groups of spheroidal graphite cast iron grades by a classification based on mechanical properties measured on machined test pieces prepared from cast samples. The first group deals with ferritic to pearlitic grades. The second group deals with solid-solution strengthened ferritic grades.
This European Standard does not cover technical delivery conditions for iron castings (see EN 1559-1 [3] and EN 1559-3 [4]).
This European Standard does not cover all aspects of:
ausferritic spheroidal graphite cast irons which are specified in EN 1564 [5];
low alloyed ferritic spheroidal graphite cast irons which are specified in EN 16124 [6];
austenitic cast irons which are specified in EN 13835 [7];
spheroidal graphite cast irons used for pipes, fittings and their joints which are the subject of EN 545 [8], EN 598 [9] and EN 969 [10];
the grades of spheroidal graphite cast iron as specified in EN 545 which are used for products such as industrial valves, non industrial manually operated shut-off valves and flanges and their joints, which are the subject of the applicable European product standards.
Committee |
ISE/111
|
DevelopmentNote |
Supersedes 94/341519 DC. Together with BS EN 1564 supersedes BS 2789(1985). (11/2002) Supersedes 05/30129773 DC. (09/2007)
|
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 1563:2011 | Identical |
NEN EN 1563 : 2012 | Identical |
NBN EN 1563 : 2012 | Identical |
I.S. EN 1563:2011 | Identical |
DIN EN 1563:2015-07 (Draft) | Identical |
SN EN 1563 : 2012 | Identical |
NF EN 1563 : 2012 | Identical |
ONORM EN 1563 : 2012 | Identical |
UNI EN 1563 : 2012 | Identical |
NS EN 1563 : 2011 | Identical |
UNE-EN 1563:2012 | Identical |
11/30243193 DC : 0 | BS 750 - SPECIFICATION FOR UNDERGROUND FIRE HYDRANTS AND SURFACE BOX FRAMES AND COVERS |
14/30283902 DC : 0 | BS 3288-1 - INSULATOR AND CONDUCTOR FITTINGS FOR OVERHEAD POWER LINES - PART 1: PERFORMANCE AND GENERAL REQUIREMENTS |
BS 8561:2013 | Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods |
DEFSTAN 02-857/2(2010) : 2010 | REQUIREMENTS FOR THE WELDING OF CAST IRON |
DEFSTAN 02-304(PT1)/2(2002) : 2002 | SHAFTING SYSTEMS AND PROPULSORS - PART 1: DESIGN REQUIREMENTS FOR MAIN PROPULSION SHAFTING |
DEFSTAN 02-327/3(2006) : 2006 | REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS |
DEFSTAN 02-304(PT2)/2(2002) : 2002 | SHAFTING SYSTEMS AND PROPULSORS - PART 2: DESIGN REQUIREMENTS FOR MAIN PROPULSION SHAFTING AUXILIARIES |
DEFSTAN 02-327/4(2016) : 2016 | STANDARDS FOR DEFENCE REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS |
DEFSTAN 02-313/1(2000) : 2000 AMD 1 2002 | DIESEL ENGINES FOR MARINE PROPULSION AND AUXILIARY MACHINERY |
DEFSTAN 02-375/2(2017) : 2017 | VALVE DESIGN AND MANUFACTURE |
DEFSTAN 02-327/2(2001) : INTERIM | REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS |
DEFSTAN 02-304(PT1)/3(2015) : 2015 | SHAFTING SYSTEMS & PROPULSORS - PART 1: DESIGN REQUIREMENTS FOR MAIN PROPULSION SHAFTING |
DEFSTAN 02-315/3(2005) : 2005 | AIR COMPRESSORS |
08/30142158 DC : DRAFT NOV 2008 | BS 5834-2 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR GAS AND UTILITIES' PURPOSES - PART 2: SPECIFICATION FOR SURFACE BOXES |
02/710149 DC : 0 | PD 2790 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SHELL BOILERS |
05/30113263 DC : DRAFT FEB 2005 | BS 7775 - SPECIFICATION FOR PENSTOCKS |
12/30270677 DC : 0 | BS 8561 - RENOVATION AND CONNECTION FITTINGS FOR USE ON WATER SUPPLY PIPES |
BS 750:1984 | Specification for underground fire hydrants and surface box frames and covers |
BS 750:2012 | Specification for underground fire hydrants and surface box frames and covers |
BS 7775:2005 | Penstocks for use in water and other liquid flow applications. Specification |
BS 3288-1:2014 | Insulator and conductor fittings for overhead power lines Performance and general requirements |
BS 750:2006 | Specification for underground fire hydrants and surface box frames and covers |
BS 5834-2:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes |
BS 4074:2000 | Specification for steel trench struts |
DEFSTAN 02-304(PT2)/3(2015) : 2015 | SHAFTING SYSTEMS & PROPULSORS - PART 2: DESIGN REQUIREMENTS FOR MAIN PROPULSION SHAFTING AUXILIARIES |
BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
DEFSTAN 02-361/2(2017) : 2017 | VALVE ROD GEARING |
BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
EN 13835:2012 | Founding - Austenitic cast irons |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 16124:2011 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO/TR 15931:2004 | Designation system for cast irons and pig irons |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
ISO 945-1:2008 | Microstructure of cast irons Part 1: Graphite classification by visual analysis |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.