BS EN 1706:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-31-2021
English
03-31-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Designation systems
6 Chemical composition
7 Mechanical properties
8 Rounding rules for determination of compliance
Annex A (informative) - Mechanical properties of pressure die
cast alloys
Annex B (informative) - Comparison of casting characteristics,
mechanical and other properties
Annex C (informative) - Comparison between cast aluminium
alloy designations
Bibliography
Defines the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
This European Standard specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
Annex B is included as a guide to the selection of alloys for a specific use or process.
This European Standard is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.
Committee |
NFE/35
|
DevelopmentNote |
Together with BS EN 1676, BS EN 1559-1 & BS EN 1559-4 it supersedes BS 1490(1988) (08/1999) Supersedes 94/713477 DC. (04/2003)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
DIN EN 1706:2013-12 | Identical |
UNE-EN 1706:2011 | Identical |
UNI EN 1706 : 2010 | Identical |
NEN EN 1706 : 2010 | Identical |
EN 1706:2010 | Identical |
NS EN 1706 : 2010 | Identical |
NBN EN 1706 : 2010 | Identical |
NF EN 1706 : 2010 | Identical |
I.S. EN 1706:2010 | Identical |
SN EN 1706 : 2010 | Identical |
ONORM EN 1706 : 2013 | Identical |
BS 1139-2.2(2009) : 2009 | METAL SCAFFOLDING - PART 2: COUPLERS AND FITTINGS - SECTION 2.2: COUPLERS AND FITTINGS OUTSIDE THE SCOPE OF BS EN 74 - REQUIREMENTS AND TEST METHODS |
DEFSTAN 22-65/2(2001) : INTERIM | SPECIFICATION FOR GAUGES, SUBMARINE DEPTH, DIAL INDICATING |
DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
DEFSTAN 22-94/1(2007) : 2007 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-868/2(2011) : 2011 | REQUIREMENTS FOR THE DESIGN OF CENTRE FED HOSE REELS |
DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 22-65/3(2005) : 2005 | GAUGES, SUBMARINE DEPTH, DIAL INDICATING |
DEFSTAN 02-375/2(2017) : 2017 | VALVE DESIGN AND MANUFACTURE |
DEFSTAN 22-94/3(2011) : 2011 | SPECIFICATION FOR THE REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
DEFSTAN 22-94/2(2008) : 2008 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
04/30085945 DC : DRAFT NOV 2004 | BS 1703 - REFUSE CHUTES AND HOPPERS - SPECIFICATION |
08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
BS 5834-2:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes |
BS 1703:2005 | Refuse chutes and hoppers. Specification |
09/30150058 DC : 0 | BS 1139-2.2 - METAL SCAFFOLDING - PART 2: COUPLERS - SECTION 2.2: ALUMINIUM COUPLERS AND SPECIAL COUPLERS IN STEEL - REQUIREMENTS AND TEST METHODS |
BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
DEFSTAN 02-361/2(2017) : 2017 | VALVE ROD GEARING |
BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 1780-3:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition |
EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
EN 601:2004 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff |
ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 576:2003 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.