BS EN 206 : 2013
Current
Current
The latest, up-to-date edition.
CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2013
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Classification
5 Requirements for concrete and methods of verification
6 Specification of concrete
7 Delivery of fresh concrete
8 Conformity control and conformity criteria
9 Production control
10 Evaluation of conformity
11 Designation for designed concrete
Annex A (normative) - Initial test
Annex B (normative) - Identity testing
Annex C (normative) - Provisions for assessment,
surveillance and certification of production
control
Annex D (normative) - Additional requirements
for specification and conformity of concrete
for special geotechnical works
Annex E (informative) - Recommendation for
the use of aggregates
Annex F (informative) - Recommendation for limiting
values of concrete composition
Annex G (informative) - Guidelines for self-compacting
concrete requirements in the fresh state
Annex H (informative) - Rules of application for
8.2.1.3, Method C
Annex J (informative) - Deviation to accommodate a
notified Spanish Regulation
Annex K (informative) - Concrete families
Annex L (informative) - Further information regarding
specific paragraphs
Annex M (informative) - Guidance on provisions
valid in the place of use
Bibliography
Pertains to concrete for structures cast in situ, precast structures, and structural precast products for buildings and civil engineering structures.
| Committee |
B/517/1
|
| DevelopmentNote |
Supersedes BS EN 206-1, BS EN 206-9 & 12/30257889 DC. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
108
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 206:2013+A1:2016 | Identical |
| 14/30291598 DC : 0 | BS 8500-2 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| 14/30291596 DC : 0 | BS 8500-1 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
| 01/102327 DC : DRAFT MAR 2001 | BS 8500-3 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 3: REQUIREMENTS FOR DESIGNATED CONCRETES |
| BS 8500-1(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
| BS 8004:2015 | Code of practice for foundations |
| BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
| BS 6744:2016 | Stainless steel bars. Reinforcement of concrete. Requirements and test methods |
| BS 8002:2015 | Code of practice for earth retaining structures |
| BS 1722-12:2016 | Fences Steel palisade fences. Manufacturing and installation. Specification |
| BS PAS 170-1(2017) : 2017 | VEHICLE SECURITY BARRIERS - LOW SPEED IMPACT TESTING - PART 1: TROLLEY IMPACT TEST METHOD FOR BOLLARDS |
| 15/30301520 DC : 0 | BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004) |
| BS 7543:2015 | Guide to durability of buildings and building elements, products and components |
| BS PAS 8810(2016) : 2016 | TUNNEL DESIGN - DESIGN OF CONCRETE SEGMENTAL TUNNEL LININGS - CODE OF PRACTICE |
| 15/30330848 DC : 0 | BS 7979 - SPECIFICATION FOR LIMESTONE FINES FOR USE WITH PORTLAND CEMENT |
| 17/30342957 DC : 0 | BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE |
| 15/30302283 DC : 0 | BS 8081 - GROUTED ANCHORS - CODE OF PRACTICE |
| BS 8081:2015 | CODE OF PRACTICE FOR GROUTED ANCHORS |
| BS PAS 8820(2016) : 2016 | CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION |
| BS 1881-124:2015 | Testing concrete Methods for analysis of hardened concrete |
| 01/102328 DC : DRAFT MAR 2001 | BS 8500-4 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 4: REQUIREMENTS FOR STANDARDIZED PRESCRIBED CONCRETES |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| BS EN 1992-1-1 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS 7979:2016 | Specification for limestone fines for use with Portland cement |
| BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 5834-1:2017 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for guards and plinths |
| EN 934-1:2008 | Admixtures for concrete, mortar and grout - Part 1: Common requirements |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
| EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| CR 13902:2000 | Test methods for determining the water/cement ratio of fresh concrete |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| ISO 7980:1986 | Water quality Determination of calcium and magnesium Atomic absorption spectrometric method |
| CR 13901:2000 | The use of the concept of concrete families for the production and conformity control of concrete |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 12350-9:2010 | Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
| DIN 4030-2:2008-06 | ASSESSMENT OF WATER, SOIL AND GASES FOR THEIR AGGRESSIVENESS TO CONCRETE - PART 2: SAMPLING AND ANALYSIS OF WATER AND SOIL SAMPLES |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| CEN/TR 16639:2014 | Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept |
| PREN 13055 : DRAFT 2012 | LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 15743:2010+A1:2015 | Supersulfated cement - Composition, specifications and conformity criteria |
| EN 12350-12:2010 | Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test |
| EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 14647:2005/AC:2006 | CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| CEN/TR 16369:2012 | Use of control charts in the production of concrete |
| EN 14889-2:2006 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| EN 14721:2005+A1:2007 | Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12350-8:2010 | Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 14889-1:2006 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
| EN 14216:2015 | Cement - Composition, specifications and conformity criteria for very low heat special cements |
| EN 12390-1:2012 | TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| CEN/TS 12390-11:2010 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| ISO 7870-4:2011 | Control charts Part 4: Cumulative sum charts |
| EN ISO 7980 : 2000 | WATER QUALITY - DETERMINATION OF CALCIUM AND MAGNESIUM - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| EN 14488-7:2006 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
| EN 450-1:2012 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
| EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria |
| ISO 7870-3:2012 | Control charts Part 3: Acceptance control charts |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| ISO 16204:2012 | Durability — Service life design of concrete structures |
| EN 14199:2015 | Execution of special geotechnical works - Micropiles |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| ISO 4316:1977 | Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| PREN 16502 : DRAFT 2012 | TEST METHOD FOR THE DETERMINATION OF THE DEGREE OF SOIL ACIDITY ACCORDING TO BAUMANN-GULLY |
| EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| EN 1538:2010+A1:2015 | Execution of special geotechnical work - Diaphragm walls |
| EN 13577:2007 | Chemical attack on concrete - Determination of aggressive carbon dioxide content in water |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 13670:2009 | Execution of concrete structures |
| CEN/TR 16349:2012 | Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete |
| EN 12350-10:2010 | Testing fresh concrete - Part 10: Self-compacting concrete - L box test |
| EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
| CEN/TS 12390-10:2007 | Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete |
| CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
US$356.96
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.