• There are no items in your cart

BS EN 267 : 2009

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
Available format(s)

Hardcopy , PDF

Withdrawn date

02-05-2020

Language(s)

English

Published date

01-01-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Constructional and operational requirements - safety
  requirements and/or protective measures
5 Testing
6 Marking and labelling
Annex A (normative) - Smoke number
Annex B (normative) - Emission measurements and
        corrections
Annex C (informative) - Conversion factors
Annex D (normative) - FID measuring method for recording
        the unburned hydrocarbons
Annex E (informative) - Conformity evaluation
Annex F (informative) - Examples for equipping of burners
Annex G (informative) - Other fuels
Annex H (informative) - Specific additional requirements
        and limitations for use of EN 267 burners for industrial
        applications
Annex I (informative) - Check of the air proving device
Annex J (normative) - Machine related hazards - additional
        safety requirements and/or protective measures
Annex K (normative) - Additional requirements for burners
        with pressurised parts and burners firing pressurized
        bodies as defined in the Pressure Equipment Directive
        (PED) - 97/23/EC
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         98/37/EC Machinery Directive
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         2006/42/EC Machinery Directive
Annex ZC (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         97/23/EC Pressure Equipment Directive (PED)
Bibliography

Describes the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.

Committee
GSE/27
DevelopmentNote
Supersedes 96/707065 DC (10/2005) 2009 Edition Re-Issued in September 2011 & incorporates AMD 1 2011. Supersedes 05/30143184 DC, 06/30154694 DC, 06/30154705 DC and 11/30231764 DC. (10/2011)
DocumentType
Standard
Pages
92
PublisherName
British Standards Institution
Status
Withdrawn
SupersededBy
Supersedes

17/30351608 DC : 0 BS 5410-2 - CODE OF PRACTICE FOR OIL FIRING - PART 2: INSTALLATIONS PROVIDING SPACE HEATING, HOT WATER AND STEAM SUPPLY SERVICES TO NON-DOMESTIC BUILDINGS
BS 5410-1:2014 Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes
BS 5410-3:2016 Code of practice for oil firing Installations for furnaces, kilns, ovens, oil-fuelled generators and other industrial purposes
12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
02/710149 DC : 0 PD 2790 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SHELL BOILERS
BS 5410-2:1978 Code of practice for oil firing Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
15/30319437 DC : 0 BS 5410-3 - CODE OF PRACTICE FOR OIL FIRING - PART 3: INSTALLATIONS FOR FURNACES, KILNS, OVENS, OIL-FUELLED STANDBY GENERATORS AND OTHER INDUSTRIAL PURPOSES
14/30285453 DC : 0 BS 5410-1 - CODE OF PRACTICE FOR OIL FIRING - PART 1: INSTALLATIONS UP TO 45 KW OUTPUT CAPACITY FOR SPACE HEATING AND HOT WATER SUPPLY PURPOSES
12/30170835 DC : 0 BS 5410-2 - CODE OF PRACTICE FOR OIL FIRING - PART 2: SPACE HEATING, HOT WATER AND STEAM SUPPLY SERVICES FOR COMMERCIAL AND INDUSTRIAL PREMISES
BS 5410-2:2013 Code of practice for oil firing Installations over 45 kW output capacity for space heating, hot water and steam supply services
BS 5410-1:1997 Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes

EN 12953-9:2007 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN ISO 15609-5:2011 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01)
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 9606-4:1999 Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN 1254-4:1998/AC:1999 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 9330-5:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler
ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 9606-5:2000 Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers Dimensions, tolerances and conventional masses per unit length
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 1254-1:1998 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
ISO 9329-1:1989 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties
EN ISO 15609-2:2001/A1:2003 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding
ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
EN 12952-7:2012 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 746-8 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN 1044 : 1999 BRAZING - FILLER METALS
ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
EN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 746-4 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
ISO 9330-2:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
ISO 9330-3:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
ISO 9330-4:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
ISO 23552-1:2007 Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 12516-3:2002/AC:2003 VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 9330-1:1990 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 15614-7:2016 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding
EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
EN 230:2005 Automatic burner control systems for oil burners
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 10204:2004 Metallic products - Types of inspection documents
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 746-5 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 5: PARTICULAR SAFETY REQUIREMENTS FOR SALT BATH THERMOPROCESSING EQUIPMENT
ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification
ISO 15609-2:2001 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN ISO 9606-5:2000 Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
ISO 15609-5:2011 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding
EN 12952-11:2007 Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 9330-6:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
PREN 746-7 : DRAFT 1994 INDUSTRIAL THERMOPROCESSING EQUIPMENT - SPECIAL SAFETY REQUIREMENTS FOR VACCUUM THERMOPROCESSING EQUIPMENT
EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004)
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 15035:2006 Heating boilers - Special requirements for oil fired room sealed units up to 70 kW
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 15036-1:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
EN ISO 9606-3 : 1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
ISO 1127:1992 Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
ISO 9606-3:1999 Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
US$335.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.