• There are no items in your cart

BS EN 60335-2-69:2012

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
Available format(s)

Hardcopy , PDF

Superseded date

11-30-2014

Language(s)

English

Published date

05-31-2013

This clause of Part 1 is replaced by the following.

This International Standard deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments.

It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system.

NOTE 101 Attention is drawn to the fact that additional requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account.

NOTE 102 This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope:

  • public use areas such as hotels, schools, hospitals;

  • industrial locations, for example factories and manufacturing shops;

  • retail outlets, for example shops and supermarkets;

  • business premises, for example offices and banks;

  • all uses other than normal housekeeping purposes.

They are not equipped with a traction drive. The following power systems are covered:

  • mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,

  • battery powered motors.

This standard also applies to machines handling hazardous dust, such as asbestos.

NOTE 103 Additional requirements for machines handling hazardous dust are given in Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply.

NOTE 104 Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard.

This European Standard deals with the reasonably foreseeable hazards presented by machines that are encountered by all persons.

However, in general, it does not take into account:

  • children playing with the machine;

  • the use of the machine by children;

  • the use of the machine by vulnerable people or very vulnerable people.

This standard does not apply to

  • vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2);

  • floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72);

  • spray extraction machines for commercial use (IEC 60335-2-68);

  • hand-held mains-operated electrical garden blowers, vacuums and blower vacuums (IEC 60335-2-100);

  • hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series);

  • appliances for medical purposes (IEC 60601-1);

  • machines designed for use in corrosive environments;

  • machines designed for picking up liquids with a flash point below 55 °C;

  • machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22.

NOTE 103 Additional requirements for machines handling hazardous dust are given in Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply.

NOTE 104 Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard.

Committee
CPL/61/10
DevelopmentNote
To be read in conjunction with BS EN 60335-1 Supersedes 01/207511 DC, 89/28858 DC & 94/216804 DC (07/2003) Supersedes 02/208583 DC. (06/2005) Supersedes 07/30161814 DC. (07/2008) Supersedes 08/30195352 DC. (01/2010) Supersedes 10/30216256 DC. (05/2013)
DocumentType
Standard
Pages
80
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

BS PAS 60-2(2004) : 2004 EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 2: NEGATIVE PRESSURE UNITS - SPECIFICATION
09/30189957 DC : 0 BS 8520-3 - EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 3: OPERATION, CLEANING AND MAINTENANCE OF CLASS H VACUUM CLEANERS - CODE OF PRACTICE
BS PAS 60-3(2004) : 2004 EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 3: OPERATION, CLEANING AND MAINTENANCE OF CLASS H VACUUM CLEANERS - CODE OF PRACTICE
BS 8520-3:2009 Equipment used in the controlled removal of asbestos-containing materials Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice
BS 8520-2:2009 Equipment used in the controlled removal of asbestos-containing materials Negative pressure units. Specification
09/30189955 DC : 0 BS 8520-2 - EQUIPMENT USED IN THE CONTROLLED REMOVAL OF ASBESTOS-CONTAINING MATERIALS - PART 2: NEGATIVE PRESSURE UNITS - SPECIFICATION

ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
IEC 60335-2-67:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
IEC 60335-2-100:2002 Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
IEC 60335-2-72:2016 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES
ISO 11428:1996 Ergonomics Visual danger signals General requirements, design and testing
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEC 60312-1:2010+AMD1:2011 CSV Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 6344-2:1998 Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

View more information
US$335.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.