• There are no items in your cart

BS EN 60936-1:2000

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Maritime navigation and radiocommunication equipment and systems. Radar Shipborne radar. Performance requirements. Methods of testing and required test results
Available format(s)

Hardcopy , PDF

Superseded date

05-30-2008

Language(s)

English

Published date

07-07-2003

1 Scope
2 Normative references
3 Performance requirements
      3.1 (A4/1) Introduction
      3.2 (A4/2) General
      3.3 (A4/3.1) Range performance
      3.4 (A4/3.2) Minimum range
      3.5 (A4/3.3) Display
      3.6 (A4/3.4) Range measurement
      3.7 (A4/3.5) Heading indication (heading line)
      3.8 (A4/3.6) Bearing measurement
      3.9 (A4/3.7) Discrimination
      3.10 (A4/3.8) Roll or pitch
      3.11 (A4/3.9) Antenna scan
      3.12 (A4/3.10) Azimuth stabilisation
      3.13 (A4/3.11) Performance monitoring
      3.14 (A4/3.12) Anti-clutter device
      3.15 (A4/3.13) Operation
      3.16 (A4/3.14) Operation with radar beacons and
                       SARTs
      3.17 (A4/3.15) Display modes
      3.18 (A4/3.16) Interference from magnetic fields
      3.19 (A4/3.17) Radar installation
      3.20 (A4/3.18) Failure warnings (alarms) and status
                       indications
      3.21 (A4/4) Multiple radar installations
      3.22 (A4/5) Interface
      3.23 (A4/6) Navigational information
      3.24 (A4/7) Plotting
      3.25 Standard names - abbreviations and symbols
      3.26 (A4/8) Ergonomics
      3.27 Safety precautions
4 Methods of testing and required test results
      4.1 General conditions of measurement and
             definitions
      4.2 Power supply, cabling distances and technical
             information
      4.3 (3.3) Range performance
      4.4 (3.4) Minimum range
      4.5 (3.5) Display
      4.6 (3.6) Range measurement
      4.7 (3.7) Heading indicator (heading line)
      4.8 (3.8) Bearing measurement
      4.9 (3.9) Discrimination
      4.10 (3.10) Roll and pitch performance
      4.11 (3.11) Antenna scan
      4.12 (3.12) Azimuth stabilisation
      4.13 (3.13.1) Performance monitor check
      4.14 (3.14) Anti-clutter devices
      4.15 (3.15) Operation
      4.16 (3.16) Operation with radar beacons and SARTs
      4.17 (3.17) Display modes
      4.18 (3.18) Interference from external magnetic
                    fields
      4.19 (3.19) Radar installation
      4.20 (3.20) Failure warnings (alarms) and status
                    indications
      4.21 (3.21) Multiple radar installations
      4.22 (3.22) Interface
      4.23 (3.23) Navigational information
      4.24 (3.24) Plotting
      4.25 (3.25) Standard names - abbreviations and
                    symbols
      4.26 (3.26) Ergonomics
      4.27 (3.27) Safety precautions
      4.28 (3) Spurious emissions
      4.29 (3.9.3) Antenna horizontal radiation pattern
Annex A (normative) Method for relating the radar cross-
                    section (echoing area) of one radar
                    target with another
Annex B (normative) Standard names, abbreviations and
                    symbols for control functions on marine
                    navigational radar equipment
Annex C (normative) Guidelines for the display of
                    navigational information on radar by
                    means of radar maps
Annex D (normative) Measurement methods for spurious
                    emissions
Annex C (normative) Guidelines for the display of
                    navigational information on radar by
                    means of radar maps
Annex D (normative) Measurement methods for spurious
                    emissions
Annex E (informative) Performance checks during environmental
                      testing
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications

Defines minimum performance criteria, test methods and required test results for conformance to performance standards not inferior to those required by IMO resolution MSC.64 (67), Annex 4.

IEC 60068-1:2013 includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. Although primarily intended for electrotechnical products, this standard is not restricted to them and may be used in other fields where desired. Other methods of environmental testing, specific to the individual types of specimen, may be included in the relevant specifications. The framework of environmental test tailoring process is given in order to assist the production of test specifications with appropriate tests and test severities. This seventh edition cancels and replaces the sixth edition, published in 1988, and constitutes a technical revision. The main changes with respect to the previous edition are listed below:
- updated normative reference list;
- indication of normative and informative annexes;
- new informative Annex C, Environmental test tailoring.

Committee
EPL/80
DevelopmentNote
Supersedes BS EN 60936. (05/2000) Also numbered as IEC 60936-1 Supersedes 01/204194 DC & 98/233344 DC (07/2003) Reviewed and confirmed by BSI, November 2005. (10/2005)
DocumentType
Standard
Pages
72
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

IEC 60872-2:1999 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results
IEC 61174:2015 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
EN 61023:2007 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - MARINE SPEED AND DISTANCE MEASURING EQUIPMENT (SDME) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
EN 60872-1:1998 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results
IEC 61162-1:2016 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
IEC 61209:1999 Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results
EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
ISO 9000-2:1997 Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
IEC 61023:2007 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results
EN 61209:1999 Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results
IEC 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
ISO 9000-4:1993 Quality management and quality assurance standards — Part 4: Guide to dependability programme management
IEC 60872-3:2000 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results
IEC 60872-1:1998 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
EN 60872-2:1999 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results
IEC 60936-3:2002 Maritime navigation and radiocommunication equipment and systems - Radar - Part 3: Radar with chart facilities - Performance requirements - Methods of testing and required test results
IEC 61996:2000 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results
EN 61174:2015 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
IEC 61162-2:1998 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission
ISO 9000-1:1994 Quality management and quality assurance standards — Part 1: Guidelines for selection and use
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
ISO 9000-3:1997 Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software

View more information
US$335.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.