BS EN ISO 10380:2012
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
10-31-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design requirements
5 Performance requirements and tests
6 Evaluation of conformity
7 Installation instructions, packaging,
designation and marking
Annex A (normative) - Equivalent European
material specifications
Bibliography
Describes the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies.
This International Standard specifies the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies.
Committee |
GSE/42
|
DevelopmentNote |
Partially supersedes BS 6501-1(1991) Supersedes 01/703999 DC (04/2003) Supersedes 11/30218155 DC. (10/2012)
|
DocumentType |
Standard
|
Pages |
48
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN ISO 10380 : 2012 | Identical |
NBN EN ISO 10380 : 2012 | Identical |
NEN EN ISO 10380 : 2012 | Identical |
I.S. EN ISO 10380:2012 | Identical |
EN ISO 10380:2012 | Identical |
UNE-EN ISO 10380:2013 | Identical |
DIN EN ISO 10380:2013-02 | Identical |
UNI EN ISO 10380 : 2012 | Identical |
ISO 10380:2012 | Identical |
NS EN ISO 10380 : 2012 | Identical |
NF EN ISO 10380 : 2012 | Identical |
04/30089331 DC : DRAFT JUL 2004 | BS 8446 - SPECIFICATION FOR THE INSTALLATION OF FLUED, NON-DOMESTIC LAUNDRY GAS-FIRED LAUNDRY APPLIANCES |
BS 8446:2005 | Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances |
BS 6400-1:2006 | Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h Low pressure (2nd family gases) |
11/30229801 DC : 0 | BS 6644 - SPECIFICATION FOR THE INSTALLATION OF GAS-FIRED HOT WATER BOILERS OF RATED INPUTS BETWEEN 70 KW (NET) AND 1.8 MW (NET) (2ND AND 3RD FAMILY GASES) |
BS 6644(2005) : 2005 | SPECIFICATION FOR INSTALLATION OF GAS-FIRED HOT WATER BOILERS OF RATED INPUTS BETWEEN 70 KW (NET) AND 1.8 MW (NET) (2ND AND 3RD FAMILY GASES) |
BS 6891:2015 | Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises |
BS 6501-1:2004 | Metal hose assemblies Guidance on the construction and use of corrugated hose assemblies |
BS 6644:2011 | Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases) |
BS 6230:2011 | Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases) |
PD 54823:2016 | Guidance for the design, commissioning and maintenance of LPG systems in small craft |
06/30148066 DC : DRAFT DEC 2006 | BS 8487 - DESIGN AND CONSTRUCTION OF GAS BOOSTERS USED IN ASSOCIATION WITH COMBUSTION EQUIPMENT - SPECIFICATION |
BS 8487(2007) : 2007 | THE DESIGN AND CONSTRUCTION OF GAS BOOSTERS USED IN ASSOCIATION WITH COMBUSTION EQUIPMENT - SPECIFICATION |
11/30229803 DC : 0 | BS 6230 - SPECIFICATION FOR INSTALLATION OF GAS-FIRED FORCED CONVECTION AIR HEATERS FOR COMMERCIAL AND INDUSTRIAL SPACE HEATING (2ND AND 3RD FAMILY GASES) |
03/105322 DC : DRAFT APR 2003 | BS 6501-1 - FLEXIBLE METAL HOSE ASSEMBLIES - PART 1: GUIDANCE ON THE CONSTRUCTION AND USE OF CORRUGATED HOSE ASSEMBLIES |
05/30086662 DC : DRAFT JAN 2005 | BS 6400-2 - SPECIFICATION FOR THE INSTALLATION, EXCHANGE, RELOCATION AND REMOVAL OF DOMESTIC-SIZED GAS METERS (2ND AND 3RD FAMILY GASES) - PART 2: MEDIUM PRESSURE (2ND FAMILY GASES) |
ISO 9724:1992 | Nickel and nickel alloy wire and drawing stock |
ISO 9723:1992 | Nickel and nickel alloy bars |
ISO 16143-3:2014 | Stainless steels for general purposes Part 3: Wire |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 6208:1992 | Nickel and nickel alloy plate, sheet and strip |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 13133:2000 | Brazing - Brazer approval |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 10095:1999 | Heat resisting steels and nickel alloys |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN 1779:1999/A1:2003 | NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR METHOD AND TECHNIQUE SELECTION |
ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 10806:2003 | Pipework Fittings for corrugated metal hoses |
ISO 7369:2004 | Pipework Metal hoses and hose assemblies Vocabulary |
ISO 9328-7:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels |
EN 1652:1997/AC:2003 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
ISO 6317:2008 | Hot-rolled carbon steel strip of commercial and drawing qualities |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.