BS EN ISO 1119:2011
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-31-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Values
Annex A (informative) - Relation to the GPS matrix model
Bibliography
Defines calculated values for a series of cones or conical tapers, ranging from 120 degrees to less than 1 degree, or ratios from 1:0,289 to 1:500, intended for general use in technical engineering.
This International Standard provides calculated values for a series of cones or conical tapers, ranging from 120° to less than 1°, or ratios from 1:0,289 to 1:500, intended for general use in technical engineering.
It applies only to plain conical surfaces, and excludes prismatic pieces, taper threads, bevel gears, etc.
| Committee |
TPR/1
|
| DevelopmentNote |
Supersedes 10/30209612 DC. (01/2012)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 1119 : 2012 | Identical |
| NEN EN ISO 1119 : 2011 | Identical |
| NBN EN ISO 1119 : 2012 | Identical |
| I.S. EN ISO 1119:2011 | Identical |
| UNE-EN ISO 1119:2012 | Identical |
| EN ISO 1119:2011 | Identical |
| NF EN ISO 1119 : 2012 | Identical |
| DIN EN ISO 1119:2012-04 | Identical |
| NS EN ISO 1119 : 2011 | Identical |
| ISO 1119:2011 | Identical |
| SN EN ISO 1119 : 2012 | Identical |
| BS 8888:2008 | Technical product specification. Specification |
| BS 8888:2011 | Technical product documentation and specification |
| 13/30275718 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| 16/30334592 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| BS 4500:2009 | Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| 11/30234091 DC : DRAFT JULY 2011 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| 09/30192596 DC : 0 | BS 4500 - LIMITS AND FITS - GUIDANCE FOR SYSTEM OF CONE (TAPER) FITS AND TOLERANCES FOR CONES FROM C = 1:3 TO 1:500, LENGTHS FROM 6 MM TO 630 MM AND DIAMETERS UP TO 500 MM |
| BS 8888:2004 | TECHNICAL PRODUCT SPECIFICATION (TPS) - SPECIFICATION |
| BIP 3016 : 2004 | BS 8888(2004) - TECHNICAL PRODUCT SPECIFICATION CD-ROM |
| BS 8888:2017 | Technical product documentation and specification |
| BS 8888:2006 | Technical product specification (TPS). Specification |
| BS 8888:2013 | Technical product documentation and specification |
| ISO 8489-4:1995 | Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 5237:1978 | Textile machinery and accessories Cones for yarn winding (cross wound) Half angle of the cone 5 degrees 57' |
| ISO 297:1988 | 7/24 tapers for tool shanks for manual changing |
| ISO 8489-5:1995 | Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57' |
| ISO 595-2:1987 | Reusable all-glass or metal-and-glass syringes for medical use Part 2: Design, performance requirements and tests |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 3040:2016 | Geometrical product specifications (GPS) Dimensioning and tolerancing Cones |
| ISO 8489-3:1995 | Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' |
| ISO 296:1991 | Machine tools — Self-holding tapers for tool shanks |
| ISO 595-1:1986 | Reusable all-glass or metal-and-glass syringes for medical use Part 1: Dimensions |
| ISO 8489-2:1995 | Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30' |
| IEC 60095-2:2009 | Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals |
| ISO 575:1978 | Textile machinery and accessories Transfer cones Half angle of the cone 4 degrees 20' |
| ISO 324:1978 | Textile machinery and accessories Cones for cross winding for dyeing purposes Half angle of the cone 4 degrees 20' |
| ISO 12164-1:2001 | Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
| ISO 239:1999 | Drill chuck tapers |
| ISO 368:2006 | Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.