BS EN ISO 12100:2010
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-31-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Strategy for risk assessment and risk reduction
5 Risk assessment
6 Risk reduction
7 Documentation of risk assessment and risk reduction
Annex A (informative) - Schematic representation of a
machine
Annex B (informative) - Examples of hazards, hazardous
situations and hazardous events
Annex C (informative) - Trilingual lookup and index of
specific terms and expressions used in ISO 12100
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EC
Directive 2006/42/EC
Bibliography
Describes basic terminology, principles and a methodology for achieving safety in the design of machinery.
This International Standard specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or the provision of sufficient risk reduction. Guidance is given on the documentation and verification of the risk assessment and risk reduction process.
This International Standard is also intended to be used as a basis for the preparation of type-B or type-C safety standards.
It does not deal with risk and/or damage to domestic animals, property or the environment.
NOTE1 AnnexB gives, in separate tables, examples of hazards, hazardous situations and hazardous events, in order to clarify these concepts and assist the designer in the process of hazard identification.
NOTE2 The practical use of a number of methods for each stage of risk assessment is described in ISO/TR14121‑2.
| Committee |
MCE/3
|
| DevelopmentNote |
Supersedes BS EN ISO 12100-1, BS EN ISO 12100-2, BS EN ISO 14121-1 and 09/30201664 DC. (12/2010)
|
| DocumentType |
Standard
|
| Pages |
90
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 12100:2010 | Identical |
| EN ISO 12100:2010 | Identical |
| BS 8611:2016 | Robots and robotic devices. Guide to the ethical design and application of robots and robotic systems |
| 14/30269311 DC : 0 | BS 7036-0 - POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - PART 0: CODE OF PRACTICE FOR RISK ASSESSMENT AND RISK REDUCTION |
| BS 6440:2011 | Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification |
| 15/30320088 DC : 0 | BS 8611 - ROBOTS AND ROBOTIC DEVICES - GUIDE TO THE ETHICAL DESIGN AND APPLICATION OF ROBOTS AND ROBOTIC SYSTEMS |
| PD 5304:2014 | Guidance on safe use of machinery |
| BS 5900:2012 | Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| BS 7036-0:2014 | Power operated pedestrian doorsets. Safety in use Code of practice for risk assessment and risk reduction |
| 11/30194292 DC : 0 | BS 5900 - POWERED HOME LIFTS WITH FULLY OR PARTIALLY ENCLOSED CARS AND NO LIFT-WELL ENCLOSURES - SPECIFICATION |
| ISO 10075-2:1996 | Ergonomic principles related to mental workload Part 2: Design principles |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| ISO 14119:2013 | Safety of machinery Interlocking devices associated with guards Principles for design and selection |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| IEC 60947-5-1 : 4.0 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO/TR 14121-2:2012 | Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
| CR 1030-1 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
| ISO 447:1984 | Machine tools Direction of operation of controls |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
| ISO 9355-3:2006 | Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators |
| IEC 62079:2001 | Preparation of instructions - Structuring, content and presentation |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| ISO 14163:1998 | Acoustics — Guidelines for noise control by silencers |
| ISO 2972:1979 | Numerical control of machines — Symbols |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 10075:1991 | Ergonomic principles related to mental work-load General terms and definitions |
| IEC TS 62046:2008 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.