• There are no items in your cart

BS EN ISO 14122-1:2016

Current
Current

The latest, up-to-date edition.

Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-30-2016

This part of ISO14122 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. NOTE1 “Fixed?? means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools. This part of ISO14122 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine. NOTE2 Where no local regulation or standards exist, this part of ISO14122 can be used for means of access which are outside the scope of the standard. It is intended that this part of ISO14122 be used with a relevant access-specific part of ISO14122 . The ISO14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels. This part of ISO14122 is not applicable to machinery manufactured before the date of its publication. For the significant hazards covered by this part of ISO14122 , see Clause4.

Committee
B/208/1
DevelopmentNote
Supersedes 96/104563 DC. (03/2002) For supersession details, see summary field. (12/2012) Supersedes 14/30290999 DC. (07/2016)
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Current
Supersedes

BS 5395-3:1985 Stairs, ladders and walkways Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 4592-6:2008 Industrial type flooring and stair treads Glass reinforced plastics (GRP) moulded open mesh gratings and protective barriers. Specification
06/30094362 DC : DRAFT JAN 2006 BS 4592-2 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 2: EXPANDED METAL GRATINGS - SPECIFICATION
06/30094360 DC : DRAFT JAN 2006 BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION
02/107760 DC : DRAFT DEC 2002 BS 4211 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS
06/30094368 DC : DRAFT JAN 2006 BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION
11/30238431 DC : 0 BS 4592-0:2006:2006+A1:2012 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION
EEMUA 105 : 2014 FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS)
BS 4592-1:1995 Industrial type flooring, walkways and stair treads Specification for open bar gratings
06/30094366 DC : DRAFT JAN 2006 BS 4592-4 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 4: GLASS REINFORCED PLASTICS (GRP) OPEN BAR GRATINGS - SPECIFICATION
06/30094364 DC : DRAFT JAN 2006 BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION
BS 4592-5:1995 Industrial type flooring, walkways and stair treads Specification for solid plates in steel, aluminium and glass reinforced plastics
PD 6686:2006 Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
BS 4592-4:1992 Industrial type flooring, walkways and stair treads Specification for glass reinforced plastics open bar gratings
BS 4592-0(2006) : 2006 FLOORING, STAIR TREADS AND HANDRAILS FOR INDUSTRIAL USE - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION
BS 4592-2:1987 Industrial type flooring, walkways and stair treads Specification for expanded metal grating panels
06/30094358 DC : DRAFT JAN 2006 BS 4592-0 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 0: COMMON REQUIREMENTS
07/30156441 DC : 0 BS 4592-6 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 6: GLASS REINFORCED PLASTICS (GRP) MOULDED OPEN MESH GRATINGS - SPECIFICATION
12/30268021 DC : 0 BS 4592-0:2006 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION
BS 4592-3:1987 Industrial type flooring, walkways and stair treads Specification for cold formed planks
BS 4211(2005) : 2005 SPECIFICATION FOR PERMANENTLY FIXED LADDERS

ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
EN 364:1992/AC:1993 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - TEST METHODS
ISO 15534-3:2000 Ergonomic design for the safety of machinery — Part 3: Anthropometric data
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
EN 795:2012 Personal fall protection equipment - Anchor devices
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings

View more information
US$160.51
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.