BS EN ISO 2160:1998
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
11-21-2002
Foreword
1 Scope
2 Normative references
3 Principle
4 Reagents and materials
5 Apparatus
6 Samples and sampling
7 Preparation of test strips
8 Procedure
9 Interpretations of results
10 Expression of results
11 Precision
12 Test report
Annex A (informative) Corrosion standards
Annex B (informative) Bibliography
Identical with IP 154/2000.
This International Standard specifies a method for the determination of the corrosiveness to copper of liquid petroleum products and certain solvents. Volatile products, having a maximum vapour pressure of 124kPa at 37,8°C are included.
Volatile products with a vapour pressure above 124kPa at 37,8°C should be tested according to ISO6251 (see caution below). Electrical insulating oils should be tested according to ISO5662.
CAUTION— Some products, particularly natural gasolines, may have a significantly higher vapour pressure than is characteristic for their class, even if below 124kPa at 37,8°C. For this reason, extreme caution should be exercised to ensure that the pressure vessel containing such material is not placed in a bath at 100°C. Such samples may develop sufficient pressure at 100°C to rupture the pressure vessel and cause damage and/or injury.
Committee |
PTI/13
|
DevelopmentNote |
Also numbered as BS 2000-154(1999) Supersedes 96/124458 DC Reviewed and confirmed by BSI, August, 2004. (11/2004)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN EN ISO 2160:1999-04 | Identical |
NF EN ISO 2160 : 1998 | Identical |
UNI EN ISO 2160 : 2001 | Identical |
SN EN ISO 2160 : 1999 | Identical |
NEN EN ISO 2160 : 1998 | Identical |
ISO 2160:1998 | Identical |
EN ISO 2160:1998 | Identical |
NBN EN ISO 2160 : 1999 | Identical |
I.S. EN ISO 2160:1999 | Identical |
UNE-EN ISO 2160:1999 | Identical |
NS EN ISO 2160 : 2ED 1999 | Identical |
BS EN 1993-1-11 NA : 2006 | UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
DEFSTAN 91-74/2(2000) : 2000 | LUBRICATING OIL, STEAM TURBINE AND GEAR, EXTREME PRESSURE JOINT SERVICE DESIGNATION: OEP-80 |
DEFSTAN 91-22/4(2000) : 2000 | LUBRICATING OIL, DIESEL ENGINE: SEVERE SERVICE, GRADE 40, NATO CODE: 0-278 JOINT SERVICE DESIGNATION: OMD-113 |
BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
DEFSTAN 91-035/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
DEFSTAN 91-039/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
DEFSTAN 91-103/2(2000) : 2000 | CORROSION PREVENTIVE, WEAPON CLEANER, LUBRICANT JOINT SERVICE DESIGNATION: PX-36 |
DEFSTAN 91-102/2(2000) : 2000 | LUBRICATING OIL, CORROSION PREVENTIVE, SMALL ARMS AND LIGHT CALIBER WEAPONS NATO CODE: O-157 JOINT SERVICE DESIGNATION: OX-24 |
10/30218583 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
17/30351591 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
DEFSTAN 91-59/2(2000) : 2000 AMD 2 2002 | LUBRICATING OIL, EXTREME PRESSURE, GRADE 75W, NATO CODE: O-186, JOINT SERVICE DESIGNATION: OEP-38 LUBRICATING OIL, EXTREME PRESSURE, GRADE 80W/90 NATO CODE: O-226 JOINT SERVICE DESIGNATION: OEP-220 |
BS EN 377:1993 | Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes |
BS 489:1999 | Specification for turbine lubricants |
DEFSTAN 91-22/5(2006) : 2006 | LUBRICATING OIL, DIESEL ENGINES: SEVERE SERVICE, GRADE 40 NATO CODE: O-278 JOINT SERVICE DESIGNATION: OMD-113 |
08/30128144 DC : DRAFT APR 2008 | BS EN 1993-1-11 - UK NATIONAL ANNEX TO EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
BS 7800:1998 | Specification for high octane (super) unleaded petrol (gasoline) for motor vehicles |
BS 7800:2006 | Automotive fuel. High octane (super) unleaded petrol. Specification |
BS 4040:1997 | Specification for leaded petrol (gasoline) for motor vehicles |
BS 7800:2000 | Automotive fuel. High octane (super) unleaded petrol. Specification |
BS 4040:2001 | Specification for leaded petrol (gasoline) for motor vehicles |
DEFSTAN 91-22/6(2014) : 2014 | LUBRICATING OIL, DIESEL ENGINE: SEVERE SERVICE, GRADE 40 NATO CODE: O-278 JOINT SERVICE DESIGNATION: OMD-113 |
97/124012 DC : DRAFT OCT 1997 | |
DEFSTAN 91-110/1(1997) : 1997 | HYDRAULIC FLUID, FIRE RESISTANT AQUEOUS POLYGLYCOL JOINT SERVICE DESIGNATION: OX-40 |
BS EN 751-2:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Non-hardening jointing compounds |
BS 2869:2017 | Fuel oils for agricultural, domestic and industrial engines and boilers Specification |
BS 2869(2010) : 2010 | FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
BS 2869:1998 | Specification for fuel oils for agricultural, domestic and industrial engines and boilers |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 6251:1996 | Liquefied petroleum gases — Corrosiveness to copper — Copper strip test |
ISO 5662:1997 | Petroleum products Electrical insulating oils Detection of corrosive sulfur |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.