Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-07-2004

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
5 Apparatus
   5.1 General
   5.2 Tank samplers
   5.3 Drum and can samplers
   5.4 Pipeline samplers
   5.5 Sample receivers, vessels and containers
   5.6 Container closures
   5.7 Sample coolers
6 Safety precautions
7 Procedures for homogeneous petroleum liquids
   7.1 Introduction
   7.2 Precautions
   7.3 Tank sampling
   7.4 Pipeline sampling
   7.5 Dispenser (nozzle) sampling
8 Procedures for crude oils and other non-homogeneous
   petroleum liquids
   8.1 General
   8.2 Procedures
9 Sample handling
   9.1 General
   9.2 Homogenization of samples
   9.3 Verification of mixing efficiency
   9.4 Transfer of samples
10 Sampling of tank residues/deposits
11 Package sampling
   11.1 Statistical aspects of sampling packages
   11.2 Procedures for sampling packages
Annex A (informative) Guidance on safety precautions
Bibliography

Identical with IP 475-2005.

This International Standard specifies the manual methods to be used for obtaining samples of liquid or semi- liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines.

It applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 °C.

The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).

This International Standard refers to existing methods of sampling and the type of equipment presently in use. It is, however, not intended that it should exclude the use of new equipment not yet developed for commercial use, provided that such equipment enables samples to be obtained in accordance with the requirements and procedures of this International Standard.

NOTE For the purposes of this International Standard, the term \'% (m/m)\' is used to represent the mass fraction.

Committee	PTI/13
DevelopmentNote	Supersedes BS 3195-1(1989) and 99/120633 DC. (03/2004) Also numbered as BS 2000-475(2004) (05/2004)
DocumentType	Standard
Pages	66
PublisherName	British Standards Institution
Status	Current
Supersedes	99/120633 DC : FEB 99 BS 3195-1:1989 BS EN ISO 3170:1999

Standards	Relationship
SN EN ISO 3170 : 2004	Identical
DIN EN ISO 3170:2004-06	Identical
NS EN ISO 3170 : 2ED 2004	Identical
NEN EN ISO 3170 : 2004	Identical
UNE-EN ISO 3170:2004	Identical
NBN EN ISO 3170 : 2004	Identical
EN ISO 3170:2004	Identical
I.S. EN ISO 3170:2004	Identical
UNI EN ISO 3170 : 2005	Identical
NF EN ISO 3170 : 2004	Identical
ISO 3170:2004	Identical

10/30218583 DC : 0	BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION
EN 16709:2015/AC:2016	AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS EN 590 : 2013	AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
EN 16734:2016	Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
BS EN 14214:2012	LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 16709 : 2015	AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 15940:2016	Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
BS 2869:2006	Fuel oils for agricultural, domestic and industrial engines and boilers. Specification
16/30346302 DC : 0	BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
16/30346337 DC : 0	BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
EN 590:2013	Automotive fuels - Diesel - Requirements and test methods
BS 4475:2000	Specification for straight mineral lubricating oils
BS 489:1999	Specification for turbine lubricants
BS 434-1(2011) : 2011	BITUMEN ROAD EMULSIONS - PART 1: SPECIFICATION FOR ANIONIC BITUMEN ROAD EMULSIONS
17/30351591 DC : 0	BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION
EN 14214:2012+A1:2014/AC:2014	LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS 7800:2006	Automotive fuel. High octane (super) unleaded petrol. Specification
BS 4040:2001	Specification for leaded petrol (gasoline) for motor vehicles
10/30212815 DC : 0	BS 434-1 - BITUMEN ROAD EMULSIONS - PART 1: SPECIFICATION FOR ANIONIC BITUMEN ROAD EMULSIONS
BS 2000-455(2011) : 2011	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 455: DETERMINATION OF THE MANGANESE CONTENT OF GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD
BS EN 16734 : 2016	AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
IP 455 : 2014	DETERMINATION OF THE MANGANESE CONTENT OF GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD
BS 2869:2017	Fuel oils for agricultural, domestic and industrial engines and boilers Specification
BS 2869(2010) : 2010	FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION

ISO 3171:1988	Petroleum liquids — Automatic pipeline sampling
ISO 10715:1997	Natural gas — Sampling guidelines
ISO 3165:1976	Sampling of chemical products for industrial use — Safety in sampling
ISO 8943:2007	Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods
ISO 3007:1999	Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
ISO 3735:1999	Crude petroleum and fuel oils Determination of sediment Extraction method
IEC 60475:2011	Method of sampling insulating liquids
ISO 3734:1997	Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
ISO 4257:2001	Liquefied petroleum gases Method of sampling
ISO 3733:1999	Petroleum products and bituminous materials — Determination of water — Distillation method
ISO 10336:1997	Crude petroleum Determination of water Potentiometric Karl Fischer titration method
ISO 10337:1997	Crude petroleum Determination of water Coulometric Karl Fischer titration method
ISO 9029:1990	Crude petroleum Determination of water Distillation method
ISO 9030:1990	Crude petroleum Determination of water and sediment Centrifuge method

View more information

US$330.61

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

BS EN ISO 3170:2004

Current

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription