BS ISO 12891-2:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
Available format(s)
Hardcopy , PDF
Superseded date
05-01-2020
Language(s)
English
Published date
09-30-2014
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Procedures for retrieval, handling and packaging
5 Analysis of the implant interfaces
6 Analysis of the implant
7 Implant performance
Annex A (normative) - Standard forms for the
analysis of retrieved surgical implants
Annex B (informative) - ISO Standards applicable
for the evaluation of materials
Bibliography
Describes methods for the analysis of retrieved surgical implants.
| Committee |
CH/150
|
| DevelopmentNote |
Supersedes 13/30242622 DC. (09/2014)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 12891-2:2014 | Identical |
| ASTM D 2857 : 2016 | Standard Practice for Dilute Solution Viscosity of Polymers |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 5017:2013 | Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity |
| ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ISO 22088-1:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance |
| ISO 5832-1:2016 | Implants for surgery — Metallic materials — Part 1: Wrought stainless steel |
| ASTM D 4001 : 2013 : REDLINE | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO 5832-11:2014 | Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 20160:2006 | Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars |
| ASTM D 732 : 2017 : REDLINE | Standard Test Method for Shear Strength of Plastics by Punch Tool |
| ISO 458-1:1985 | Plastics Determination of stiffness in torsion of flexible materials Part 1: General method |
| ISO 5832-6:1997 | Implants for surgery Metallic materials Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 22088-2:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method |
| ISO 14949:2001 | Implants for surgery — Two-part addition-cure silicone elastomers |
| ISO 13779-1:2008 | Implants for surgery Hydroxyapatite Part 1: Ceramic hydroxyapatite |
| ISO 5832-5:2005 | Implants for surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 16402:2008 | Implants for surgery — Acrylic resin cement — Flexural fatigue testing of acrylic resin cements used in orthopaedics |
| ASTM D 1623 : 2017 : REDLINE | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
| ASTM D 5227 : 2013 : REDLINE | Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 5832-3:2016 | Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 22088-5:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method |
| ASTM D 1004 : 2013 : REDLINE | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ISO 4545-1:2005 | Metallic materials Knoop hardness test Part 1: Test method |
| ISO 13779-3:2008 | Implants for surgery Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity |
| ISO 15374:1998 | Implants for surgery — Requirements for production of forgings |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ISO 60:1977 | Plastics — Determination of apparent density of material that can be poured from a specified funnel |
| ASTM D 1239 : 2014 : REDLINE | Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
| ISO 4545:1993 | Metallic materials Hardness test Knoop test |
| ISO 5832-8:1997 | Implants for surgery Metallic materials Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy |
| ISO 13356:2015 | Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| ISO 13779-2:2008 | Implants for surgery Hydroxyapatite Part 2: Coatings of hydroxyapatite |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 5833:2002 | Implants for surgery — Acrylic resin cements |
| ISO 5832-4:2014 | Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy |
| ASTM E 204 : 1998 | Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index |
| ISO 6474-1:2010 | Implants for surgery Ceramic materials Part 1: Ceramic materials based on high purity alumina |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ISO 13781:2017 | Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing |
| ISO 22088-3:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method |
| ISO 899-2:2003 | Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading |
| ISO 5834-2:2011 | Implants for surgery Ultra-high-molecular-weight polyethylene Part 2: Moulded forms |
| ASTM F 619 : 2014 : REDLINE | Standard Practice for Extraction of Medical Plastics |
| ISO 5832-14:2007 | Implants for surgery Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| ISO 61:1976 | Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
| ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ASTM D 3 : 2018 | Method of Test for Toughness of Rock (Withdrawn 1964) |
| ISO 5832-2:1999 | Implants for surgery Metallic materials Part 2: Unalloyed titanium |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 15814:1999 | Implants for surgery Copolymers and blends based on polylactide In vitro degradation testing |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 5832-7:2016 | Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| ISO 22088-4:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method |
| ISO 15309:2013 | Implants for surgery — Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices |
| ISO 22088-6:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 6: Slow strain rate method |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ASTM D 1621 : 2016 : REDLINE | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| ISO 9385:1990 | Glass and glass-ceramics Knoop hardness test |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ISO 13782:1996 | Implants for surgery Metallic materials Unalloyed tantalum for surgical implant applications |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| ISO 6721-1:2011 | Plastics Determination of dynamic mechanical properties Part 1: General principles |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ASTM D 2990 : 2017 : REDLINE | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ISO 5832-12:2007 | Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ISO 12891-1:2015 | Retrieval and analysis of surgical implants Part 1: Retrieval and handling |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ISO 6474-2:2012 | Implants for surgery Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| ISO 5832-9:2007 | Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
US$277.90
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.