• There are no items in your cart

BS ISO 13628-7 : 2005 AMD 16887

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS
Superseded date

01-31-2007

Published date

11-23-2012

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, abbreviated terms and symbols
     3.1 Terms and definitions
     3.2 Abbreviated terms
     3.3 Symbols
4 System requirements
     4.1 Purpose
     4.2 Description of C/WO riser systems
     4.3 System engineering
     4.4 System definition
     4.5 System design
     4.6 System review
     4.7 Modes of operation
     4.8 Design principles
     4.9 Operational principles
     4.10 Safety principles
     4.11 Barrier requirements
     4.12 Regulations, codes and standards
     4.13 Operational requirements
     4.14 Requirements for organization and personnel
           qualifications
     4.15 Quality system
     4.16 Documentation, records and traceability
     4.17 Verification
     4.18 Purchaser/user's responsibility
     4.19 Manufacturer's responsibility
5 Functional requirements
     5.1 Purpose
     5.2 System functional requirements
     5.3 Drift requirements
     5.4 Component requirements
     5.5 Workover control system
6 Design requirements
     6.1 Purpose
     6.2 Design principles
     6.3 Loads and load effects
     6.4 Component design criteria
     6.5 Pipe design criteria
     6.6 Connectors
     6.7 Design criteria for miscellaneous components
7 Materials and fabrication
     7.1 Introduction
     7.2 General material requirements
     7.3 Products
     7.4 Manufacture and fabrication
     7.5 Visual inspection and non-destructive
           testing
     7.6 Qualification of assembly (make-up) procedures
           and assemblers
8 Testing
     8.1 General
     8.2 Pretest requirements
     8.3 Pressure testing
     8.4 Hydraulic cleanliness
     8.5 Qualification testing
     8.6 Riser equipment and FAT
     8.7 Workover control system and FAT
     8.8 System integration tests
     8.9 System pressure test
9 Marking, storage and shipping
     9.1 Riser joints
     9.2 Components
     9.3 Workover control system and hydraulic equipment
10 Inspection, maintenance, reassessment and monitoring
     10.1 General
     10.2 Inspection and maintenance
     10.3 Reassessment of risers
     10.4 Monitoring
11 Documentation
     11.1 Purpose
     11.2 General
     11.3 Design basis
     11.4 Design analysis
     11.5 Connector documentation
     11.6 Manufacture and fabrication
     11.7 As-built documentation
     11.8 Design and fabrication resume
     11.9 Installation and operation manual(s)
     11.10 Condition resume
     11.11 Filing of documentation
Annex A (informative) Standardization of the C/WO riser
                      interface (vertical tree)
Annex B (informative) Operational modes and global riser
                      system analysis
Annex C (informative) Fatigue analysis and assessment
Annex D (informative) Structural resistance methods
Annex E (informative) Example calculations for pipe
                      pressure design
Annex F (informative) Purchasing guideline
Annex G (informative) Bolt preload
Annex H (informative) Seals
Annex I (normative) Qualification of connectors
Bibliography

Provides requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.

Committee
PSE/17/-/4
DevelopmentNote
Supersedes 01/715268 DC. (12/2005) Renumbered and superseded by BS EN ISO 13628-7. (01/2007)
DocumentType
Standard
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ISO 13628-7:2005 Identical

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
BS 7448-1:1991 Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
API 2A WSD : 2014 PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
ISO/TR 9769:1991 Steel and iron Review of available methods of analysis
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
API TR 6AF2 : 2013 TECHNICAL REPORT ON CAPABILITIES OF API INTEGRAL FLANGES UNDER COMBINATION OF LOADING - PHASE 2
API TR 6AF1 : 1998 TECHNICAL REPORT ON TEMPERATURE DERATING ON API FLANGES UNDER COMBINATION OF LOADING
ISO 4885:2017 Ferrous materials Heat treatments Vocabulary
ISO 783:1999 Metallic materials Tensile testing at elevated temperature
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
ISO 15579:2000 Metallic materials Tensile testing at low temperature
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
ISO 13535:2000 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
API 6J : 1992 BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL
ISO 14693:2003 Petroleum and natural gas industries — Drilling and well-servicing equipment
ISO 148:1983 Steel — Charpy impact test (V-notch)
API RP 16Q : 2017 DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
API 7 : 2001 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
ISO 10474:2013 Steel and steel products — Inspection documents
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
ISO 13533:2001 Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
EN 1591-2:2008 Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 13628-6:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
BS 7448-2:1997 Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
ISO 9327-1:1999 Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements
API 6AF : 2008 TECHNICAL REPORT ON CAPABILITIES OF API FLANGES UNDER COMBINATIONS OF LOAD
API 579-1 : 2016 FITNESS-FOR-SERVICE
ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
ISO 10945:1994 Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 9000-1:1994 Quality management and quality assurance standards — Part 1: Guidelines for selection and use
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.