BS ISO/TS 12928:1999
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
08-15-2000
Foreword
Introduction
1 Scope
2 Normative references
3 Explanations of symbols used
4 Specifications guide
Annex A (informative) Compatibility with wet skin pass
products
Annex B (informative) Long duration cyclic staining test on
stacked plates
Annex C (informative) Test of exposure under outside shelter
Annex D (informative) Evaluation of film homogeneity/wetting
Annex E (informative) Compatibility of the products with the
primary crosslinkable paints applied by
electro-deposition
Bibliography
Intended to facilitate the application of ISO 6743-8 and specify the characteristics to be taken into account when establishing specifications for a given application, and to enable these characteristics to serve as a basis for discussion between supplier and end user. Does not cover health, safety, disposal and environment areas which should be dealt with separately, in accordance with the laws or regulations in force in each country.
This Technical Specification has been prepared with the following purposes:
-
to facilitate the application of ISO 6743-8 and to specify the characteristics to be taken into account when establishing specifications for a given application;
-
to enable these characteristics to serve as a basis for discussion between the end user and the supplier.
This Technical Specification does not cover specific requirements which should be examined separately with a view to a common agreement between the end user and the product supplier.
This Technical Specification does not cover the health, safety, disposal and environment areas which should be delft with separately, according to the regulations or laws in force in each country.
| Committee |
PTI/7
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| ISO/TS 12928:1999 | Identical |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| DIN 51369:2013-05 | TESTING OF COOLING LUBRICANTS - DETERMINATION OF THE PH VALUE OF WATER-MIXED COOLING LUBRICANTS |
| NFT 66 014 : 1969 | BLACK PRODUCTS - DETERMINATION OF SPECIFIC GRAVITY OF HARD BITUMINOUS PRODUCTS |
| IP 178 : 74(R1981) | DETERMINATION OF WATER DISPLACING AND CORROSION PROTECTION PROPERTIES OF TEMPORARY CORROSION PREVENTIVES |
| DIN 51579:2010-03 | Testing of paraffin - Determination of needle penetration |
| NFT 60 188 : 1992 | AQUEOUS MACHINING FLUIDS - PREPARATION OF SYNTHETIC WATER FOR TESTING |
| NFT 60 167 : 1994 | TEMPORARY PROTECTION AGAINST CORROSION - STORAGE STABILITY (CYCLIC CONDITIONS) |
| MIL-P-149 Revision D:1984 | PLASTIC COATING COMPOUND, STRIPPABLE [HOT DIPPING] |
| NFT 60 174 : 1994 | TEMPORARY PROTECTION AGAINST CORROSION - EVALUATION OF CORROSION PROTECTION PROPERTIES - CYCLIC HUMIDITY CABINET METHOD |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| NFT 60 176 : 1994 | TEMPORARY PROTECTION AGAINST CORROSION - STAIN TEST - SHORT-TERM RESINIFICATION STACKED PANELS |
| DIN 50017:1982-10 | ATMOSPHERES AND THEIR TECHNICAL APPLICATION; CONDENSATION WATER TEST ATMOSPHERES |
| ISO 3987:2010 | Petroleum products — Determination of sulfated ash in lubricating oils and additives |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| NFT 30 055 : 1974 | PAINTS - TEST FOR RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| IP 366 : 1984 | DETERMINATION OF RUST PREVENTION PROPERTIES OF METAL PRESERVATIVES - HUMIDITY CABINET METHOD |
| NFT 60 159 : 1994 | TEMPORARY ANTICORROSION PRODUCTS - DEGREASING ABILITY BY DIPPING |
| NFT 60 168 : 1994 | TEMPORARY ANTICORROSION PRODUCTS - ANTICORROSION AND WATER DISPLACEMENT CHARACTERISTICS |
| NFX 41 002 : 1975 | PROTECTION AGAINST PHYSICAL, CHEMICAL AND BIOLOGICAL AGENTS - SALT SPRAY TEST |
| DIN 51367:1991-08 | TESTING OF METAL WORKING FLUIDS; DETERMINATION OF THE STABILITY OF EMULSIFIED METAL WORKING FLUIDS IN HARD WATER |
| ISO 6293:1983 | Petroleum products — Determination of saponification number |
| ISO 2137:2007 | Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum |
| NFT 30 084 : 1995 | PEINTURES ET VERNIS - DETERMINATION DE L'EXTRAIT SEC CONVENTIONNEL |
| ISO 2908:1974 | Petroleum waxes — Determination of oil content |
| ISO 3678:1976 | Paints and varnishes — Print-free test |
| NFT 60 173 : 1994 | TEMPORARY PROTECTION AGAINST CORROSION - EVALUATION OF RUST PROTECTION PROPERTIES - HUMIDITY CABINET METHOD |
| ISO 2811:1974 | Paints and varnishes — Determination of density |
| NFT 30 120 : 1974 | PAINTS - DETERMINATION OF FILM THICKNESS - SUMMARY TABLE OF FRENCH STANDARDS |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| NFT 46 002 : 1988 | VULCANIZED OR THERMOPLASTIC RUBBER - TENSILE TEST |
| ISO 6244:1982 | Petroleum waxes and petrolatums Determination of drop melting point |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
| IP 263 : 1970 | DETERMINATION OF STABILITY OF WATER MIX METAL WORKING FLUIDS |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 6743-8:1987 | Lubricants, industrial oils and related products (class L) Classification Part 8: Family R (Temporary protection against corrosion) |
| NFT 60 132 : 1993 | PETROLEUM PRODUCTS - CONE PENETRATION AND WATER RESISTANCE OF LUBRICATING GREASES |
| NFT 60 165 : 1994 | TEMPORARY PROTECTION AGAINST CORROSION - FINGER PRINT NEUTRALIZATION PROPERTIES |
| ISO 1517:1973 | Paints and varnishes Surface-drying test Ballotini method |
| NFT 60 170 : 1994 | TEMPORARY ANTICORROSION PRODUCTS - ASSESSMENT OF THE COVERING CAPABILITY BY DIPPING |
| NFT 66 008 : 1979 | DETERMINATION DU POINT DE RAMOLLISSEMENT DES PRODUITS BITUMINEUX - METHODE "BILLE ET ANNEAU" |
| NFT 60 187 : 1991 | AQUEOUS MACHINING FLUIDS - EMULSIFYING AND SOLUBILIZING SUITABILITY AND STABILITY AT REST |
| DIN 51386-1:1986-03 | TESTING OF CORROSION PREVENTIVE OILS IN A CONDENSATION WATER ALTERNATING ATMOSPHERE |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| NFT 60 11993 : 1993 | AQUEOUS MACHINING FLUIDS - DETERMINATION OF THE PH VALUE |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| NFT 30 016 : 1991 | |
| NFT 60 123 : 1972 | PETROLEUM PRODUCTS - DETERMINATION OF NEEDLE PENETRATION OF PARAFFINS AND WAXES |
| BS 1133(1950) : LATEST | |
| ISO 3768:1976 | Metallic coatings — Neutral salt spray test (NSS test) |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| NFT 30 056 : 74 FD | PAINTS - PROCEDURE FOR NATURAL AGEING TESTS |
| ISO 6743-0:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 0: General |
| ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| MIL-C-15074 Revision E:1991 | CORROSION PREVENTIVE, FINGERPRINT REMOVER |
| NFT 60 197 : 1993 | AQUEOUS AND NON AQUEOUS METAL WORKING FLUIDS - SHORT AND LONG TERM STORAGE STABILITY |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| ISO 3015:1992 | Petroleum products — Determination of cloud point |
| NFT 60 605 : 1994 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF POLYCYCLIC AROMATICS IN UNUSED LUBRICATING BASE OILS - DIMETHYL SULPHOXIDE EXTRACTION REFRACTIVE INDEX METHOD |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
| NFT 60 166 : 1994 | TEMPORARY PROTECTION AGAINST CORROSION - METHOD OF PREPARING METALLIC PROBES FOR THE EVALUATION OF THE PROPERTIES OF PRESERVATIVE PRODUCTS |
| NFT 60 147 : 2003 | PETROLEUM PRODUCTS - DETERMINATION OF SOFTENING POINT OF PARAFFIN PRODUCTS - RING AND BALL METHOD |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.