CEI EN 60034-1 : 2015
Current
The latest, up-to-date edition.
Hardcopy , PDF
01-01-2015
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Duty
5 Rating
6 Site operating conditions
7 Electrical operating conditions
8 Thermal performance and tests
9 Other performance and tests
10 Rating plates
11 Miscellaneous requirements
12 Tolerances
13 Electromagnetic compatibility (EMC)
14 Safety
Annex A (informative) - Guidance for the application of duty
type S10 and for establishing the value
of relative thermal life expectancy TL
Annex B (informative) - Electromagnetic compatibility (EMC) limits
Bibliography
Allegato ZA (normativo) - Normative references to international
publications with their corresponding
European publications
Annex ZZ (informative) - Coverage of Essential Requirements
of EC Directives
Applies to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349.
Committee |
CT 2
|
DevelopmentNote |
Classificazione CEI 2-3. (08/2001)
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
Comitato Elettrotecnico Italiano
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 60034-1:2010/corrigendum Oct. 2010 | Identical |
IEC 60038:2009 | IEC standard voltages |
EN 60034-30:2009 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits |
IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
CEI 25-7 : 1ED 2005 | SIMBOLI LETTERALI DA USARE IN ELETTROTECNICA - PARTE 1: GENERALITA |
CEI 8-6 : 1998 | NOMINAL VOLTAGES FOR LOW VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
IEC 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
IEC 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
IEC 60050-411:1996 | International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
CEI 2-8 : 2ED 1997 | MACCHINE ELETTRICHE ROTANTI - PARTE 8: MARCATURA DEI TERMINALI E SENSO DI ROTAZIONE DELLE MACCHINE ROTANTI |
IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
EN 60027-1:2006/A2:2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL |
EN 60034-3:2008 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
EN 60034-12:2017 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
EN 60034-15:2009 | Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
CEI 2-17 : 1ED 1991 | MACCHINE ELETTRICHE ROTANTI - PARTE 15: LIVELLI DI TENSIONE DI TENUTA AD IMPULSO DELLE MACCHINE ROTANTI A CORRENTE ALTERNATA CON BOBINE STATORICHE PREFORMATE |
IEC 60034-8:2007+AMD1:2014 CSV | Rotating electrical machines - Part 8: Terminal markings anddirection of rotation |
EN 60034-8:2007/A1:2014 | ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION (IEC 60034-8:2007/A1:2014) |
IEC TS 60034-17:2006 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
EN 60027-4:2007 | Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines |
EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
CEI 24-2 : 1ED 1997 | SIMBOLI LETTERALI DA USARSI IN ELETTROTECNICA - PARTE 4: SIMBOLI DELLE GRANDEZZE RELATIVE ALLE MACCHINE ELETTRICHE ROTANTI |
EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
IEC 60034-12:2016 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 60034-2:1996/A2:1996 | ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) |
IEC 60027-4:2006 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
EN 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
CEI 16-2 : 1ED 1979 | |
IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
CEI 15-26 : 1ED 1997 | VALUTAZIONE E CLASSIFICAZIONE TERMICA DELL'ISOLAMENTO ELETTRICO |
EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
CEI 2-6 : 1ED 1976 | MACCHINE ELETTRICHE ROTANTI - METODI DI DETERMINAZIONE, MEDIANTE PROVE, DELLE PERDITE E DEL RENDIMENTO |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.