FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2012

Publisher

Comitato Elettrotecnico Italiano

FOREWORD
INTRODUCTION
1 General
2 Test conditions
3 Measurements of bore, wall
   thickness and concentricity
4 Density
5 Resistance to splitting after
   heating
6 Heat shock (resistance to heat)
7 Resistance to soldering heat
8 Loss in mass on heating of
   uncoated textile glass sleeving
9 Longitudinal change
10 Deformation under load
   (resistance to pressure at
   elevated temperature)
11 Thermal stability of PVC
   sleeving
12 Volatile content of silicone
   sleeving
13 Bending after heating
14 Bending at low temperature
15 Brittleness temperature
16 Dimensional stability on
   storage (applicable to
   heat-shrinkable sleeving only)
17 Hydrolysis of coating
18 Flexibility (extruded sleeving
   only)
19 Tensile strength, tensile
   stress at 100% elongation,
   elongation at break and secant
   modulus at 2% elongation
20 Fraying resistance test
21 Breakdown voltage
22 Insulation resistance
23 Volume resistivity
24 Permittivity and dissipation
   factor
25 Resistance to tracking
26 Flame propagation tests
27 Oxygen index
28 Transparency
29 Ionic impurities test
30 Silver staining test
31 Electrolytic corrosion resistance
32 Corrosion resistance (tensile and
   elongation)
33 Copper corrosion (presence of
   corrosive volatiles)
34 Colour fastness to light
35 Resistance to ozone
36 Resistance to selected fluids
37 Thermal endurance
38 Mass per unit length
39 Heat ageing
40 Water absorption
41 Restricted shrinkage (applicable
   to heat-shrinkable sleeving only)
42 Colour stability to heat
43 Smoke index
44 Toxicity index
45 Halogen content
46 Acid gas generation
47 Hot elongation and hot set
48 Tension set (applicable to
   elastomeric sleeving only)
49 Tear propagation (applicable
   to elastomeric sleeving only)
50 Long term heat ageing (3000 h)
51 Dynamic shear at ambient
   temperature
52 Dynamic shear at elevated
   temperature
53 Dynamic shear after heat shock
   and heat ageing
54 Rolling drum peel to aluminium
55 Aluminium rod dynamic shear
56 Sealing
57 Adhesive T peel strength of two
   bonded heat-shrinkable substrates
58 Circumferential extension
59 Voltage proof
60 Thermal shock
Bibliography

Defines methods of test for flexible insulating sleeving, including heatshrinkable sleeving, intended primarily for insulating electrical conductors and connections of electrical apparatus, although they may be used for other purposes.

Committee	CT 15/112
DevelopmentNote	Classificazione CEI 15-69. (08/2001)
DocumentType	Standard
Pages	92
PublisherName	Comitato Elettrotecnico Italiano
Status	Current

Standards	Relationship
IEC 60684-2:2011	Identical
EN 60684-2:2011	Identical

IEC 60243-1:2013	Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
ISO 182-2:1990	Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method
ISO 4589-3:2017	Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
EN ISO 62:2008	Plastics - Determination of water absorption (ISO 62:2008)
ISO 2921:2011	Rubber, vulcanized Determination of low-temperature retraction (TR test)
IEC 60212:2010	Standard conditions for use prior to and during the testing of solid electrical insulating materials
ISO 974:2000	Plastics Determination of the brittleness temperature by impact
IEC 60250:1969	Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
IEC 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 60304:1982	Standard colours for insulation for low-frequency cables and wires
IEC 60216-4-2:2000	Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
IEC 60216-4-1:2006	Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
ISO 105-B01:2014	Textiles Tests for colour fastness Part B01: Colour fastness to light: Daylight
ISO 13943:2017	Fire safety — Vocabulary
IEC 60754-1:2011	Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
EN 60216-4-2:2000	Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
IEC 60216-2:2005	Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 60587:2007	Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
HD 429 : 200S1	METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
ISO 1431-1:2012	Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
IEC 60093:1980	Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
IEC 60589:1977	Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
ISO 5-4:2009	Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density
IEC 60754-2:2011	Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC 60068-2-10:2005	Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
IEC TS 60695-11-21:2005	Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
ISO 5-3:2009	Photography and graphic technology Density measurements Part 3: Spectral conditions
EN 60426:2007	Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
EN ISO 13943:2017	Fire safety - Vocabulary (ISO 13943:2017)
EN 60243-1:2013	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
ISO 5-1:2009	Photography and graphic technology Density measurements Part 1: Geometry and functional notation
EN ISO 4589-2:2017	Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 62:2008	Plastics Determination of water absorption
IEC 60426:2007	Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
EN ISO 182-2 : 1999	PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 2 - PH METHOD
ISO 37:2017	Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 4589-2:2017	Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
IEC 60587:2007	Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
EN 60216-4-1:2006	Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
ISO 105-A02:1993	Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
HD 602 : 200S1	TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY
EN ISO 105-B01:2014	Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014)
HD 381 : 200S1	METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS
EN 60212:2011	Standard conditions for use prior to and during the testing of solid electrical insulating materials
EN ISO 4589-3:2017	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
ISO 5-2:2009	Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density
ISO 182-1:1990	Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 1: Congo red method

View more information

US$299.93

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

CEI EN 60684-2 : 2012

FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory