Name: CEI EN 62752 : 1ED 2017
Brand: CEI

IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)

Amended by

CEI EN 62752/A1:2021-07

Published date

03-20-2017

Publisher

Comitato Elettrotecnico Italiano

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Characteristics of IC-CPDs
6 Marking and other product information
7 Standard conditions for operation in service and for
  installation
8 Requirements for construction and operation
9 Tests
Annex A (normative) - Test sequences and number
        of samples to be submitted for verification
        of conformity to this standard
Annex B (normative) - Routine tests
Annex C (normative) - Determination of clearances
        and creepage distances
Annex D (informative) - Switched-protective conductor
        application
Annex E (informative) - Example of IC-CPD for mode
        2 charging
Annex F (informative) - Types of IC-CPD according to
        construction and assembly
Annex G (informative) - Methods for determination of
        short-circuit power factor
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their corresponding
         European publications
Annex ZB (normative) - Special national conditions
Annex ZC (informative) - A-deviations
Annex ZZA (informative) - Relationship between this European
          standard and the essential requirements of Directive
          2014/30/EU [2014 OJ L96] aimed to be covered
Annex ZZB (informative) - Relationship between this European
          standard and the safety objectives of Directive
          2014/35/EU [2014 OJ L96] aimed to be covered

Pertains to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as IC-CPD including control and safety functions.

Committee	CT 23
DevelopmentNote	Classificazione CEI 23-137. Partially supersedes CEI EN 61851-1. (03/2017) Italian translation issued on 01.07.2017. (08/2017) NEW CHILD AMD 1 2020 IS NOW ADDED. NEW CHILD AMD 1 2021 IS NOW ADDED
DocumentType	Standard
ProductNote	NEW CHILD AMD 1 2020 IS NOW ADDED. NEW CHILD AMD 1 2021 IS NOW ADDED
PublisherName	Comitato Elettrotecnico Italiano
Status	Current

Standards	Relationship
IEC 62752:2016	Identical
EN 62752:2016	Identical

IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
EN 62196-2:2017	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
IEC 60068-2-5:2010	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
IEC 61540:1997+AMD1:1998 CSV	Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
EN 61543:1995/A2:2006	RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
ISO 16750-5:2010	Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads
IEC 62196-2:2016	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
IEC 60068-2-27:2008	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
IEC TS 62763:2013	Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire
EN 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV	Plugs and socket-outlets for household and similar purposes - Part1: General requirements
IEC 61543:1995	Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
EN 60068-2-64:2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
IEC 60068-2-11:1981	Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
EN ISO 2409:2013	Paints and varnishes - Cross-cut test (ISO 2409:2013)
EN ISO 178:2010/A1:2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
EN ISO 179-1:2010	Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
IEC 60068-2-31:2008	Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-64:2008	Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
EN 60112 : 2003 AMD 1 2009	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
HD 60364-4-442:2012	Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
ISO 4628-3:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
EN 60068-2-27:2009	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN ISO 4628-3:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 60695-2-10:2013	Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60364-4-44:2007+AMD1:2015 CSV	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
ISO 17409:2015	Electrically propelled road vehicles Connection to an external electric power supply Safety requirements
ISO 179-1:2010	Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
IEC 60664-3:2016	Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
EN 60068-3-4:2002	Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 60068-2-11:1999	Environmental testing - Part 2: Tests - Test Ka: Salt mist
IEC 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-3-4:2001	Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-5:2011	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
ISO 2409:2013	Paints and varnishes Cross-cut test
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV	Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
IEC 60695-2-10:2013	Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
ISO 178:2010	Plastics Determination of flexural properties
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60309-2:1999/A2:2012	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES (IEC 60309-2:1999/A2:2012)
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 60664-3:2017	Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 61851-1:2017	Electric vehicle conductive charging system - Part 1: General requirements
IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV	Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60068-2-31:2008	ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
EN 60309-1:1999/A1:2007/AC:2014	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
IEC 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)