• There are no items in your cart

CEN/TS 16516:2013

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air
Withdrawn date

03-11-2023

Published date

10-02-2013

Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Intended conditions of use, emission scenarios
   and European reference room
5 Product sampling and transport to the laboratory
6 Handling of product samples in the laboratory
7 Test chamber conditions
8 Determination of volatile organic compounds in
   test chamber air
9 Calculation of specific emission rates and
   expression of results at the reference room
10 Reporting for the horizontal reference method
11 Indirect methods
Annex A (informative) - Repeatability
Annex B (informative) - Examples of indirect
        methods (also called simplified, screening,
        secondary, derived or alternative methods)
Annex C (informative) - Information on very volatile
        organic compound (VVOC) testing
Annex D (informative) - Key concepts for product
        sampling
Annex E (informative) - Example of a form for
        the sampling report
Annex F (informative) - Example form for a chain
        of custody report
Annex G (informative) - Benzene artefact generation
        on Tenax
Annex H (informative) - Information on regulations
        concerning the emission into indoor air of
        dangerous substances from construction
        products
Bibliography

This Technical Specification specifies a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air. This method is applicable to volatile organic compounds, semi-volatile organic compounds, and volatile aldehydes. It is based on the use of a test chamber and subsequent analysis of the organic compounds by GC-MS or HPLC. NOTE 1Supplemental information is given on indirect test methods (Annex B) and on measuring very volatile organic compounds (see informative Annex C).NOTE 2This Technical Specification describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.

Committee
CEN/TC 351
DocumentType
Technical Specification
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn

DIN EN 16402 E : 2014 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
PD CEN/TR 16496:2013 Construction Products. Assessment of release of dangerous substances. Use of harmonised horizontal assessment methods
DIN EN 16738 E : 2016 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
PREN 14904-1 : DRAFT 2017 SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 1: ESSENTIAL CHARACTERISTICS
I.S. EN 16738:2015 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
UNE-EN 16402:2014 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
17/30362165 DC : 0 BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
UNI EN 16309 : 2014-10 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
DIN EN 16309:2014-12 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
BS EN 16738:2015 Emission safety of combustible air fresheners. Test methods
BS EN 16402:2013 Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing
16/30339855 DC : 0 BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
BS EN 16309 : 2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
PREN 14374 : DRAFT 2016 TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
UNI EN 16402 : 2013 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
S.R. CEN/TR 16912:2016 GUIDELINES FOR A PROCEDURE TO SUPPORT THE EUROPEAN STANDARDIZATION OF CEMENTS
I.S. EN 16309:2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
DIN EN 13999-2:2014-03 ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS
I.S. EN 13999-2:2013 ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS
14/30298789 DC : 0 BS EN 16738 - EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
ISO 21930:2017 Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services
UNE-EN 16738:2016 Emission safety of combustible air fresheners - Test methods
EN 16402:2013 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
BS EN 13999-2:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Determination of volatile organic compounds
EN 16516:2017 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
UNI EN 13999-2 : 2014 ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS
DIN EN 16738:2016-04 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
PD CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
PREN 15102 : DRAFT 2016 DECORATIVE WALLCOVERINGS - ROLL FORM
14/30311128 DC : 0 BS EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 16738 : DRAFT 2014 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
PREN 14041 : DRAFT 2016 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
UNE-EN 13999-2:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
UNE EN 16309 : 0 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
EN 16738:2015 Emission safety of combustible air fresheners - Test methods
EN 16309:2014+A1:2014 Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology
EN 13999-2:2013 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
PREN 14716 : DRAFT 2014 STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 16516:2017 CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
16/30325907 DC : 0 BS EN 15102 - DECORATIVE WALLCOVERINGS - ROLL FORM
17/30353879 DC : 0 BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS
CEN/TR 16496:2013 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods
DIN EN 16402:2014-02 PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING

EN 717-2:1994/AC:2002 WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
EN 120:1992 Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method
ISO 11074:2015 Soil quality — Vocabulary
EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
VDA 278 : 2011 THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES
EN 717-1:2004 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
ISO 12219-3:2012 Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method
EN ISO 16017-1:2000 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
EN 717-3:1996 Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method
ISO 16017-1:2000 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling
ASTM D 5582 : 2014 : REDLINE Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
EN ISO 13137:2013 Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
VDA 277 : 1995 NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN
EN ISO 16000-11:2006 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006)
CEN/TR 16220:2011 Construction products - Assessment of release of dangerous substances - Complement to sampling
ISO 12460-4:2016 Wood-based panels Determination of formaldehyde release Part 4: Desiccator method
EN ISO 16000-9:2006/AC:2007 INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD
EN ISO 16000-10:2006 Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006)
ISO 16000-9:2006 Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005)
CEN/TR 16496:2013 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods
ISO 12460-3:2015 Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
ISO 16000-3:2011 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
ISO 12460-1:2007 Wood-based panels Determination of formaldehyde release Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
ISO 12460-5:2015 Wood-based panels Determination of formaldehyde release Part 5: Extraction method (called the perforator method)
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
ISO 16000-11:2006 Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
ISO 16000-6:2011 Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.