CFR 49(PTS178-199) : OCT 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TRANSPORTATION
Superseded date
06-12-2019
Published date
01-12-2013
Publisher
| DevelopmentNote |
Supersedes & Renumbers CFR 49(PTS186-199). (03/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Code of Federal Regulations
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-DTL-11732 Revision F:2010 | CYLINDER, COMPRESSED GAS: CHLORINE; DOT 3A480 OR DOT 3AA480, GENERAL SPECIFICATION FOR |
| NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
| DOD-D-64015 Revision A:1986 | Diethylene Glycol Dinitrate (DEGDN) (for use in Ammunition) |
| API RP 1167 : 2016 | PIPELINE SCADA ALARM MANAGEMENT |
| NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| ASTM D 7815 : 2017 : REDLINE | Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF<inf>2</inf>BrCl) |
| ASTM D 6368 : 2006 : R2012 | Standard Specification for Vapor-Degreasing Solvents Based on <emph type="bdit">normal</emph>-Propyl Bromide and Technical Grade <emph type="bdit">normal</emph>-Propyl Bromide |
| ANSI N14.5 : 2014 | RADIOACTIVE MATERIALS - LEAKAGE TESTS ON PACKAGES FOR SHIPMENT |
| MIL-A-27420 Base Document:1970 | AIR, LIQUID, FOR BREATHING PURPOSES |
| NFPA 1123 : 2018 | Code for Fireworks Display<br> |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
| API 1111 REDLINE : 2009 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| MIL-DTL-82884 Revision A:1996 | CARTRIDGE, IMPULSE, CCU-69A/A |
| API RP 2200 : 2015 | REPAIRING HAZARDOUS LIQUID PIPELINES |
| SAE AS 6163 : 2015 | TEMPERATURE CONTROLLED CONTAINER - PERFORMANCE REQUIREMENTS AND TEST PARAMETERS |
| CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
| ASTM D 5616 : 2004 : R2016 | Standard Specification for Reclaimed Trichloroethylene |
| AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
| ASTM D 4504 : 1994 : R2011 | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM D 5396 : 2004 : R2010 | Standard Specification for Reclaimed Perchloroethylene |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 18A : 2017 | WATER ADDITIVES FOR FIRE CONTROL AND VAPOR MITIGATION |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
| AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
| NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| API RP 1171 : 2015 | FUNCTIONAL INTEGRITY OF NATURAL GAS STORAGE IN DEPLETED HYDROCARBON RESERVOIRS AND AQUIFER RESERVOIRS |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| NACE SP 03 13 : 2013 | GUIDED WAVE TECHNOLOGY FOR PIPING APPLICATIONS |
| NACE SP 05 02 : 2010 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
| SAE AIR 5690 : 2006 | RATIONALE FOR REPLACEMENT OF PYROTECHNIC SIGNALING DEVICES IN SURVIVAL KITS ON TRANSPORT CATEGORY AIRCRAFT LIFE RAFTS AND SLIDE-RAFTS |
| API 1162 :2010 | PUBLIC AWARENESS PROGRAMS FOR PIPELINE OPERATORS |
| ASTM F 402 : 2005 : R2012 | Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings |
| SAE AIR 5742 : 2017 | PACKAGING AND TRANSPORTATION OF OXYGEN EQUIPMENT |
| 11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| MIL-C-48617 Revision A:1983 | CARTRIDGE, 20 MM, HIGH EXPLOSIVE, INCENDIARY, M56A4 LOADING, ASSEMBLING AND PACKING |
| ASTM D 4995 : 2010 : R2015 | Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent |
| DOD-M-64040 Revision A:1986 | METHYL DIPHENYLUREA |
| MIL-PRF-83671 Revision B:1997 | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
| API RP 1162 : 2010(R2015) | PUBLIC AWARENESS PROGRAMS FOR PIPELINE OPERATORS |
| ASTM D 5616 : 2004 : R2010 | Standard Specification for Reclaimed Trichloroethylene |
| CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| NFPA 1122 : 2018 | CODE FOR MODEL ROCKETRY |
| SAE AS 87132 : 2012(R2018) | LUBRICANT, CETYL ALCOHOL, 1-HEXADECANOL, APPLICATION TO FASTENERS |
| NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
| ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
| ASTM D 5396 : 2004 | Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 5616 : 2004 | Standard Specification for Reclaimed Trichloroethylene |
| ASTM F 2896 : 2011 : R2017 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 7887 : 2013 | Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| ASHRAE GUIDELINE 6 : 2015 | REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
| PIP PLSC0021 : 2017 | PRESSURE TESTING OF ASME B31.8 METALLIC PIPING |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| A-A-59866 Base Document:2010 | TEAM STOVE |
| MIL-A-45062 Revision E:1973 | ACTIVATOR, M2 LOADING, ASSEMBLING AND PACKING |
| ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
| API RP 1168 : 2015 | PIPELINE CONTROL ROOM MANAGEMENT |
| SAE AMS F 24610 : 2016 | FIXANT, HOLD DOWN |
| API PUBL 1673 : 2009 | COMPILATION OF AIR EMISSION ESTIMATING METHODS FOR PETROLEUM DISTRIBUTION AND DISPENSING FACILITIES |
| MIL-DTL-48360 Revision A:2014 | Charge, Propelling, M200, for 105MM Howitzer, M119 Loading, Assembling and Packing |
| MIL-N-246 Revision B:1962 | NITROGLYCERIN |
| MIL-STD-101 Revision C:2014 | COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS |
| SAE AMSA8576A:1997(S2016) | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| SAE ARP 5818 : 2015 | AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS |
| SAE J 2343 : 2018 | RECOMMENDED PRACTICE FOR LNG MEDIUM AND HEAVY-DUTY POWERED VEHICLES |
| SAE AMS 3066 : 2016 | COMPOUND, CORROSION-INHIBITING WATER-DISPLACING, SOFT FILM, AEROSOL CANNED |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| CGA SA 23 : 2012 | SAFETY ALERT - ACETYLENE CYLINDERS MISSING REQUIRED MARKINGS |
| ASTM D 4504 : 1994 : R2005 | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM D 6368 : 2006 | Standard Specification for Vapor-Degreasing Solvents Based on <bdit>normal</bdit>-Propyl Bromide and Technical Grade <bdit>normal</bdit>-Propyl Bromide |
| ASTM D 4995 : 2010 | Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent |
| ASTM D 5396 : 2004 : R2015 | Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 3436 : 1999 | Standard Practice for Sampling and Handling Aniline (Withdrawn 2005) |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| ICC IFGC CODE AND COMMENTARY : 2015 | IFGC® Code and Commentary |
| ASTM C 1620 : 2016-03 | SPECIFICATION FOR AEROSOL POLYURETHANE AND AEROSOL LATEX FOAM SEALANTS |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| API RP 1174:2015 | RECOMMENDED PRACTICE FOR ONSHORE HAZARDOUS LIQUID PIPELINE EMERGENCY PREPAREDNESS AND RESPONSE |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| NACE SP 01 13 : 2013 | PIPELINE INTEGRITY METHOD SELECTION |
| MIL-PRF-27626 Revision G:2016 | SAMPLER, CRYOGENIC LIQUID |
| FAA AC 120-95 : 2016 | PORTABLE OXYGEN CONCENTRATORS |
| MIL-S-52881 Revision B:1989 | SERVICING UNITS, COMPRESSED GAS, MOBILE |
| MIL S 27626 : F | SAMPLER, CRYOGENIC LIQUID |
| MIL-DTL-3701 Revision F:2010 | CYLINDERS, COMPRESSED GAS: DOT-8 AND DOT-8AL ACETYLENE, WITH VALVES |
| NACE 3510:2017/Corrected Version:2022 | IN-LINE INSPECTION OF PIPELINES |
| ASTM D 5998 : 2016 : REDLINE | Standard Specification for Molded Polyethylene Shipping and Storage Drums |
| ASTM F 402 : 2005 | Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings |
| API 1109 REDLINE : 2010 | MARKING LIQUID PETROLEUM PIPELINE FACILITIES |
| SAE AMS 2821 : 2017 | SALTS, HEAT-TREATING (FOR METALS) |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| ASTM D 2513 : 2017-01 | SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
| MIL-S-48573 Base Document:1977 | |
| ANSI A10.7 REDLINE : 2011 | COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011) |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| ASTM D 4504 : 1994 : R2000 : EDT 1 | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| MIL-STD-1320 Revision D:2014 | FOR DESIGNING UNIT LOADS, TRUCKLOADS, RAILCAR LOADS, AND INTERMODAL LOADS FOR AMMUNITION AND EXPLOSIVES |
| UFC 3-810-01N : Change 1 | UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS ENVIRONMENTAL ENGINEERING FOR FACILITY CONSTRUCTION |
| MIL-A-82728 Base Document:1984 | ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
| API 2200 REDLINE : 2010 | REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES |
| UFC 3-570-01 : 2016 | UNIFIED FACILITIES CRITERIA (UFC) - CATHODIC PROTECTION |
| NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| CGA SA 24 : 2012 | SAFETY ALERT - EMERGENCY MEDICAL SERVICES FILLING OXYGEN OR AIR FOR HUMAN RESPIRATION |
| ANSI Z21.74-2017 | Portable refrigerators |
| SAE AIR 825/8 : 2012 | CONTINUOUS FLOW OXYGEN SYSTEMS |
| API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| ASTM F 2896 : 2011 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 7326 : 2017 : REDLINE | Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH<inf >2</inf>FCF<inf>3</inf>, CHF<inf>2</inf> CF<inf>3</inf>, and CO<inf >2</inf>) |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| ASTM E 2169 : 2017 : REDLINE | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| ASME B16.33 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.33 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.40 : 2013 | MANUALLY OPERATED THERMOPLASTIC GAS SHUTOFFS AND VALVES IN GAS DISTRIBUTION SYSTEMS |
| ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
| ASME STP-PT-005 : 2006 | DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS |
| ASME PTB 12 : 2017 | GUIDELINES FOR ADDRESSING DATA GAPS AND RECORDKEEPING FOR ASME B31.4, B31.8 AND B31.8S FOR PIPELINE INTEGRITY MANAGEMENT |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.