• There are no items in your cart

CLC/TR 50488:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Railway applications - Safety measures for the personnel working on or near overhead contact lines
Superseded date

02-22-2021

Published date

12-22-2006

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic principles
  4.1 Safe operation
  4.2 Personnel
  4.3 Organization
  4.4 Communication (Transmission of information)
  4.5 Work location
  4.6 Tools, equipment and devices
  4.7 Drawings and records
  4.8 Signs
5 Standard operational procedures
  5.1 General
  5.2 Operating activities
  5.3 Functional checks
6 Working procedures
  6.1 General
  6.2 Dead working
  6.3 Live working
  6.4 Working in the vicinity of live parts
7 Maintenance procedures
  7.1 General
  7.2 Personnel
  7.3 Repair work
  7.4 Temporary interruption
  7.5 End of maintenance work
8 Guidance for distances in air for working procedures
Annex A (informative) Method of calculation of the
        distances in air for working procedures
Bibliography

This Technical Report (TR) is applicable to all work activity on or near the overhead contact line [IEC 60050 811, definition 811-33-02] of railway installations with supply voltage values as described in Table 1, derived from EN 50163. This Technical Report applies to requirements for safe working and maintenance procedures. It applies to all electrical work activities as well as non-electrical work activities. This Technical Report deals with the electrical hazard only. Risks coming from train traffic are not covered in this document. This Technical Report does not apply to: -guided mass transport systems such as tramways, elevated and underground metro railways, mountain railways, trolley bus and other conductor rail systems; -mine or other internal industrial material transportation railways; -railway installations with supply voltage values below 1 500 V; -experimental electrical research work.

Committee
CLC/TC 9X
DocumentType
Technical Report
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy

CLC/TS 50562:2011 Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems
14/30293535 DC : 0 BS EN 16704-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
14/30247711 DC : 0 BS EN 50633 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROTECTION PRINCIPLES FOR AC AND DC ELECTRIC TRACTION SYSTEMS
I.S. EN 50110-1:2013 OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
CEI CLC/TS 50562 : 2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS
EN 50562:2018 Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems
16/30314785 DC : 0 BS EN 50562 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, PROTECTIVE MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS
UNE-EN 50633:2017 Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems
CEI EN 50110-1 : 2014 OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
BS EN 50110-1:2013 Operation of electrical installations General requirements
BS EN 50633:2016 Railway applications. Fixed installations. Protection principles for AC and DC electric traction systems
I.S. EN 50562:2018 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, PROTECTIVE MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS
DD CLC/TS 50562:2011 Railway applications. Fixed Installations. Process, measures and demonstration of safety for electric traction systems
S.R. CLC/TS 50562:2011 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS
UNE-EN 50110-1:2014 Operation of electrical installations - Part 1: General requirements
PREN 50562 : DRAFT 2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, PROTECTIVE MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS
PREN 50633 : DRAFT 2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROTECTION PRINCIPLES FOR AC AND DC ELECTRIC TRACTION SYSTEMS
EN 50633:2016 Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems
EN 50110-1:2013 Operation of electrical installations - Part 1: General requirements

IEC 61865:2001 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
IEC 61219:1993 Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing
IEC 60895:2002 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c.
IEC 60984:2014 Live working - Electrical insulating sleeves
IEC 61057:2017 Live working - Insulating aerial devices for mounting on a chassis
IEC 60855:1985 Insulating foam-filled tubes and solid rods for live working
IEC 61235:1993 Live working - Insulating hollow tubes for electrical purposes
IEC 60832:1988 Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
EN 50122-1:2011/A4:2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
EN 61219:1993 Live working - Earthing or earthing and short-circuiting equipment using lances as short-circuiting device - Lance earthing
IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
EN 60903 : 2003 COR 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL
IEC 60743:2013 Live working - Terminology for tools, devices and equipment
EN 61236:2011 Live working - Saddles, stick clamps and their accessories
IEC 61236:2010 Live working - Saddles, stick clamps and their accessories
HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
EN 50191:2010 ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT
EN 60743:2013 Live working - Terminology for tools, devices and equipment
IEC 61111:2009 Live working - Electrical insulating matting
IEC 61229:1993+AMD1:1998+AMD2:2002 CSV Rigid protective covers for live working on a.c. installations
IEC 60850:2014 Railway applications - Supply voltages of traction systems
IEC 61243-1:2003+AMD1:2009 CSV Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 50119 : 2009 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
EN 50110-1:2013 Operation of electrical installations - Part 1: General requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 61243-1:2005/A1:2010 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
EN 60071-1:2006/A1:2010 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
CLC/TS 61112:2006 Blankets of insulating material for electrical purposes
IEC 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting
IEC 60900:2012 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
EN 50163 : 2004 COR 2013 RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
EN 61235:1995 Live working - Insulating hollow tubes for electrical purposes
EN 60895:2003 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c.
EN 60900:2012 LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C. (IEC 60900:2012)
IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
EN 60071-2:1997 Insulation co-ordination - Part 2: Application guide
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
CLC/TS 61111:2006 Matting of insulating material for electrical purposes
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
EN 60832:1996 Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
EN 60984 : 2014 LIVE WORKING - ELECTRICAL INSULATING SLEEVES
EN 60855:1996 Insulating foam-filled tubes and solid rods for live working
EN 50110-2:2010 Operation of electrical installations - Part 2: National annexes
EN 61057:2017 Live working - Insulating aerial devices for mounting on a chassis
EN 61229:1995/A2:2002 RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
IEC 60903:2014 Live working - Electrical insulating gloves
IEC 61112:2009 Live working - Electrical insulating blankets

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.