• There are no items in your cart

CR 10260 : 1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
Superseded date

08-01-2005

Published date

01-12-2013

1 Scope
2 Normative references
3 Definitions
4 Allocation of additional symbols
5 Consultation
6 Additional symbols
    6.1 Steel names
    6.2 Steel numbers
    6.3 Steels designated according to their application
          and mechanical or physical properties
    6.4 Steels designated according to their chemical
          composition
Tables
1 Symbols indicating specified requirements
2 Symbols indicating type of coating
3 Symbols indicating treatment condition

Gives additional symbols for supplementing the principal symbols of steel names as specified in EN 10027-1, together with certain additional symbols for supplementing steel numbers as specified in EN 10027-2, thereby giving a complete abbreviated identification of a steel or steel product.

Committee
ECISS/TC7
DevelopmentNote
Also numbered as BS DD214(1993). (08/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
UNI 10440 : 2000 Identical
NF CR 10260 : 98 FD Identical
DIN V 17006-100:1999-04 Identical
SN CR 10260 : 1998 Identical
NEN NPR CR 10260 : 1998 Identical

I.S. EN 10213-1:1996 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
04/100723 DC : DRAFT JAN 2004 EN 10213 - STEEL CASTINGS FOR PRESSURE PURPOSES
EN 10085:2001 Nitriding steels - Technical delivery conditions
PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
I.S. EN 10217-6:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
BS EN 10217-4:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties
BS EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
BS EN 10025-5:2004 Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
BS EN 10154:2002 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
BS EN 10250-1:1999 Open steel die forgings for general engineering purposes General requirements
BS EN 10025-2:2004 Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels
BS EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN 39:2001 Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions
DIN EN 10296-1 E : 2004 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
BS EN 10025-3:2004 Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods)
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
DIN EN 10025-5:2005-02 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
EN 10224:2002/A1:2005 NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 10312:2002/A1:2005 WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 10297-2:2005/AC:2007 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10296-2:2005/AC:2007 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10025-4:2005-02 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
EN 10213-1 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
03/103470 DC : DRAFT FEB 2003 BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
05/30132585 DC : DRAFT APR 2005 EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
01/708775 DC : DRAFT MAY 2001 PREN 10297-2 - SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES
DIN EN 10025-2:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
DIN EN 10025-3:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 10217-3:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10217-5:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 10217-6:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DIN EN 10297-1 E : 2003 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 10297-2 E : 2006 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 10297-2:2006-02 Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10296-2 : 2007-06 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
I.S. EN 10296-2:2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10169-3:2003-09 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
DIN EN 10213-1:1996-01 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
DIN EN 10169-1:2004-04 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
I.S. EN 10327:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10169-1:2004 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 10326:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10025-2:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
99/712245 DC : DRAFT AUG 1999 PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS
99/701054 DC : DRAFT JAN 1999 PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS
00/713959 DC : DRAFT SEP 2000 PREN 10138-3 - PRESTRESSING STEELS - PART 3: STRAND
05/30132603 DC : DRAFT APR 2005 EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 10085:2001 NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 10025-4:2004 Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10025-3:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DIN EN 10217-5:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 10217-3:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-1:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
I.S. ENV 10169-2:1999 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
BS EN 10217-6:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
I.S. EN 10132-1:2000 COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10089:2003-04 Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
BS EN 10213-1:1996 Technical delivery conditions for steel castings for pressure purposes General
DIN EN 10296-2 E : 2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products Products for building interior applications
UNI EN 10250-1 : 2001 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS
I.S. EN 10250-1:2000 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10087:1999 FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS
I.S. EN 39:2001 LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10154:2002 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
98/705399 DC : DRAFT MAR 1998 PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
02/704945 DC : DRAFT APR 2002 PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
03/108196 DC : 0 EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
I.S. EN 10025-1:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
03/103468 DC : DRAFT FEB 2003 BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
02/713544 DC : DRAFT NOV 2002 EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10217-3:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
00/713960 DC : 0 PREN 10138-4 - PRESTRESSING STEELS - PART 4: BARS
01/708774 DC : DRAFT MAY 2001 PREN 10296-2 - WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES
DIN EN 10025-4:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DD ENV 10169-2:1999 Continuously organic coated (coil coated) steel flat products Products for building exterior applications
I.S. EN 10025-4:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 10025-5:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
I.S. EN 10217-1:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
DIN EN 10217-4:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10217-2:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 10268 : DRAFT 2002 COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10217-6:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
DIN EN 10151:2003-02 STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10085:2001-07 Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
BS EN 10025-1:2004 Hot rolled products of structural steels General technical delivery conditions
BS EN 1503-1:2000 Valves. Materials for bodies, bonnets and covers Steels specified in European Standards
BS EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 10296-2:2005 Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
BS EN 10087 : 1999-01 FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS
BS EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions
BS EN 10147:2000 Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions
BS EN 10142:2000 Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions
BS EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
BS EN 10085 : 2001-05 NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
BS EN 10297-2:2005 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
DIN EN 10224:2005-12 NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
ENV 10169-2 : 1999 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
EN 39:2001 Loose steel tubes for tube and coupler scaffold - Technical delivery conditions
EN 1503-1:2000 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
98/705400 DC : DRAFT MAR 1998 PREN 10025-2 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS
I.S. EN 10169-3:2003 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
BS EN 10217-2 : 2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
02/704946 DC : DRAFT APR 2002 PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
98/712958 DC : DRAFT AUG 1998 PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
97/703009 DC : 0 PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
00/713958 DC : 0 PREN 10138-2 - PRESTRESSING STEELS - PART 2: WIRE
DIN EN 10025-5:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
05/30132598 DC : DRAFT APR 2005 EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
02/713103 DC : DRAFT NOV 2002 PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 10217-4:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
I.S. EN 10217-2:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10217-4:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10025-1:2011-04 (Draft) Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
BS EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
DIN EN 10296-1:2004-02 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
BS EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General
BS EN 10151:2002 Stainless steel strip for springs. Technical delivery conditions
DIN EN 10312:2005-12 Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005
EN 10087:1998 Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
DIN EN 10326:2004-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10327:2004-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10296-2:2006-02 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 10151:2002 Stainless steel strip for springs - Technical delivery conditions
EN 10250-1:1999 Open die steel forgings for general engineering purposes - Part 1: General requirements
EN 10089:2002 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
EN 10154 : 2002 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
DIN EN 10154:2002-08 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003

EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10020:2000 Definition and classification of grades of steel

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.