B149.3-15
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
01-01-2020
French, English
01-01-2015
Preface
1 Scope
2 Reference publications
3 Definitions
4 Pilot gas valve train
5 Main gas valve train
6 Additional requirements for liquid propane valve trains
7 Applications
8 Ignition systems
9 Safety controls
10 Electrical requirements
11 Rating plate
12 Initial start-up procedure
13 Additional requirements for process ovens, process furnaces,
and atmosphere generators
Annexes
A (informative) - Recommended procedure for initial start-up
of high input equipment [over 400000 Btuh (120 kW)]
B (informative) - Valve diagrams
C (informative) - Abbreviations
D (informative) - Guidelines for electronic-type fuel air-ratio
control (FARC) systems
E (informative) - Guidelines for flare pilot systems
F (informative) - Guidelines for valve proving systems (VPS)
G (informative) - Requirements for use of oxygen in
combustion systems
H (informative) - Liquid fuels
I (informative) - Solid fuels
B149.3-15 provides requirements for fuel-related components and accessories and their assembly on appliances and equipment utilizing gas. Why You Need to Know the 2015 Edition: Added requirements for shut-off valves, low ambient temperatures, appliances used to heat water or vapor, documentation required at installation and more New clauses for hoses and hose fittings and expanded clauses for overpressure protection devices New informative annexes build on previous editions by providing additional guidance and harmonizing to NFPA recommendations
Preface This is the fifth edition of CSA B149.3, Code for the field approval of fuel-related components on appliances and equipment. It supersedes the previous editions published in 2010, 2005, and 2000 by the Canadian Standards Association (CSA) as CSA B149.3, and in 1989 by the Canadian Gas Association (CGA) as CAN/CGA-B149.3. This Code brings together for the convenience of users the applicable requirements for appliances and equipment, originally published as part of the CSA B149.1 and CSA B149.2 Codes. In this 2015 edition, where a major change or addition to the previous edition of the Code has been made, the clause, table, or figure affected is identified by the symbol delta in the margin. Users of the Code are advised that the change markers in the text are not intended to be all-inclusive and are provided as a convenience only; such markers cannot constitute a comprehensive guide to the revisions made to the Code. Care must therefore be taken not to rely on the change markers to determine the current requirements of the Code. As always, users of the Code must consider the entire Code and any local amendments. The CSA B149.3 Code Committee, which is responsible for preparing this Code, consists of members of the provincial gas inspection authorities, natural gas utilities, propane distributors, appliance, equipment, and accessory manufacturers, certification organizations, and representatives from the Heating, Refrigeration and Air Conditioning Institute of Canada, the Mechanical Contractors Association of Canada, and federal government departments. This Code has been formally approved by the CSA B149.3 Technical Committee on the Code for the Field Approval of Fuel-Related Components on Appliances and Equipment and by the Interprovincial Gas Advisory Council. Scope 1.1 This Code contains the requirements for fuel-related components and accessories and their assembly on an appliance utilizing gas, downstream of the manual shut-off valve specified in Clause 6.18.2 of CSA B149.1. Clause 13 of this Code contains additional requirements for process ovens, including bakery ovens, process furnaces, and atmosphere generators operating at approximately atmospheric pressure and used by industry for the processing of materials. Recommended requirements for liquid and solid fuel-burning appliances are located in Annex H (liquids) and Annex I (solids). 1.2 This Code does not apply to (a) installations in marine pipeline terminals; (b) gas where used as a feedstock in petroleum refineries or chemical plants; (c) gas designated for storage or handling, or both, at liquefied petroleum gas bulk plants; (d) gas where used for natural gas for vehicles; (e) a new appliance for which there is an approved Standard; (f) a manually operated appliance with an input not exceeding 20 000 Btuh (6 kW) used for industrial applications; and (g) other fuels not covered in this Code and used in combination with gas. 1.3 When another fuel is used in the installation and in combination with gas, the safe operation of that fuel shall be approved. 1.4 Requirements contained herein apply only to that portion of an appliance using gas as defined in Clause 1.7, atmosphere gas, and reaction gas. 1.5 The requirements contained in this Code apply (a) to new non-certified appliances and equipment of all inputs for which there is no approved Standard; (b) when the upgrading of an existing certified or non-certified appliance is required; and (c) to programmable logic controllers or microprocessor-based controls used for flame safety. 1.6 The requirements contained in this Code may be used to replace or supplement an approved Standard with the permission of the authority having jurisdiction. 1.7 When the term \"gas\" is used, the requirements of this Code include, and apply equally to, any of the following gases or mixtures of them: natural gas, manufactured gas, propane, propane air, propylene, butane (normal butane or isobutane), and butylene. 1.8 The values given in yard/pound units are the standard. The values given in parentheses are for information only. 1.9 In this Code, unless approved otherwise by the authority having jurisdiction, \"shall\" indicates a mandatory requirement; \"should\" indicates a recommendation or that which is advised but not mandatory; and \"may\" indicates an advisory or optional statement. Notes to the text do not include mandatory or alternative requirements. The purpose of a note is to separate from the text explanatory or informative material that is not properly a part of this Code. Notes to figures and tables, however, are considered part of the figure or table and may be written as mandatory requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
DevelopmentNote |
Supersedes CGA B149.3. (06/2008) 2010 Edition is still active. Also available in CSA GAS TRADE 1 PACKAGE. (05/2016)
|
DocumentType |
Standard
|
Pages |
100
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CSA C22.2 No. 60730-2-5 : 2014 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
CSA Z240 MH SERIES : 2016 | MANUFACTURED HOMES |
ANSI Z21.20 : 2005 : INC : ADD A : 2008 : R2012 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
ANSI Z21.20-2005 (R2016) | Automatic Gas Ignition Systems and Components |
ANSI Z21.20 :2005 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
ANSI Z21.20 : 2005 : INC : ADD A : 2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
CSA C22.2 No. 24 : 2015 | TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT |
CSA Z240 MM SERIES : 2016 | |
ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
CSA B149HB : 2005 | NATURAL GAS AND PROPANE CODE HANDBOOK |
CSA B149.2:20 | Propane storage and handling code |
CSA B149.1 : 2010 : R2015 | NATURAL GAS AND PROPANE INSTALLATION CODE |
CSA B149.1 : 2010 | NATURAL GAS AND PROPANE INSTALLATION CODE |
ANSI/CSA-B149.6-15 | Code for digester gas, landfill gas, and biogas generation and utilization |
CSA B149.2 : 2010 : R2015 | PROPANE STORAGE AND HANDLING CODE |
CSA B149.2:2010 | PROPANE STORAGE AND HANDLING CODE |
ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
CSA C22.2 No. 60730-2-5 : 2014 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
CSA B140.7 : 2005 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
CGA 8.3 : 2015 | THERMOPLASTIC HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
CSA C22.2 No. 13 : 2013 | TRANSFORMERS FOR OIL- OR GAS-BURNER IGNITION EQUIPMENT |
CSA B140.7.2 : 1967 | OIL-FIRED STEAM AND HOT-WATER BOILERS FOR COMMERCIAL AND INDUSTRIAL USE |
CSA B140.1 : 1966 | VAPOURIZING-TYPE OIL BURNERS |
CSA B140.2.3 : 1981 | REPLACEMENT BURNERS AND REPLACEMENT COMBUSTION HEADS FOR RESIDENTIAL OIL BURNERS |
CSA B140.7.1 : 76(R2001) | OIL-FIRED STEAM AND HOT-WATER BOILERS FOR RESIDENTIAL USE |
CSA B140.14 : 1979 | AUTOMATIC FLUE-PIPE DAMPERS FOR USE WITH OIL-FIRED APPLIANCES |
CSA B140.9.1 : 1972 | PORTABLE LIQUID FUELLED CATALYTIC APPLIANCES |
CGA 3.16 : 2015 | LEVER OPERATED NON-LUBRICATED GAS SHUT-OFF VALVES |
CSA B140.8 : 1967 | PORTABLE INDUSTRIAL OIL-FIRED HEATERS |
CSA B140.3 : 1962 | OIL BURNING STOVES AND WATER HEATERS |
NFPA 86 : 2015 | OVENS AND FURNACES |
ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
CGA 8.1 : 2015 | ELASTOMERIC COMPOSITE HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
CSA B140.9.3 : 1986 | PORTABLE KEROSENE-FIRED HEATERS |
BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
API 537 : 2017 | FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
CGA G 4.1 : 2009 | CLEANING EQUIPMENT FOR OXYGEN SERVICE |
CSA B140.2.2 : 1971 | PRESSURE ATOMIZING OIL BURNER NOZZLES |
CSA B140.10 : 2006 | OIL-FIRED WARM-AIR HEATING APPLIANCES FOR MOBILE HOUSING AND RECREATIONAL VEHICLES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.