CSA B51 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
Available format(s)
Hardcopy , PDF
Superseded date
04-23-2019
Language(s)
English, French
Published date
01-01-2014
Publisher
Preface
B51-14, Part 1, General requirements for boilers, pressure
vessels, and pressure piping
1 Scope
2 Reference publications
3 Definitions
4 General requirements
5 Identification
6 Boilers and related components
7 Pressure vessels
8 Piping and fittings
9 Refrigeration equipment
10 Fired-heater pressure coils in petroleum and chemical
plant service
11 Repairs and alterations
12 Pressure relief devices
13 In-service inspection
Annexes
A (informative) - Burial of pressure vessels
B (informative) - Quality control program for defect
prevention and in-service reliability
C (informative) - Guidelines for safety valve, relief
valve, and safety relief valve repair organizations
D (informative) - Sample forms
E (informative) - Inspection of welds in pressure coils
exposed to direct radiant heat
F (informative) - Quality control program for
manufacturers of fittings
G (normative) - Automotive propane vessel standards
H (informative) - Overpressure protection devices
I (normative) - Historical boilers
J (normative) - Requirements regarding the use of
finite element analysis (FEA) to support a pressure
equipment design submission
B51-14, Part 2, High-pressure cylinders for the on-board
storage of natural gas and hydrogen as fuels
for automotive vehicles
0 Introduction
1 Scope
2 Reference publications
3 Definitions
4 Service conditions
5 Design approval
6 Requirements applicable to all cylinder types
7 Type 1 metal cylinders
8 Type 2 hoop-wrapped cylinders
9 Type 3 fully wrapped cylinders
10 Type 4 all-composite cylinders
11 Marking
12 Preparation for dispatch
13 Quality control
14 Test methods
Annexes
A (informative) - Report forms
B (informative) - Procedure for requalifying all-steel
natural gas vehicle storage cylinders
B51-14, Part 3, Compressed natural gas and hydrogen
refuelling station pressure piping systems
and ground storage vessels
1 Scope
2 Reference publications
3 Definition
4 General requirements
5 Compressed natural gas and hydrogen refuelling station
pressure piping systems
6 Compressed natural gas and hydrogen refuelling station
ground storage vessels
Contains: B51-14, Part 1 - General requirements for boilers, pressure vessels, and pressure piping; B51-14, Part 2 - High-pressure cylinders for the on-board storage of natural gas and hydrogen as fuels for automotive vehicles; and B51-14, Part 3 - Compressed natural gas and hydrogen refuelling station pressure piping systems and ground storage vessels.
| DevelopmentNote |
2009 Edition is still active in English & French version. A safety bulletin exists for this standard. (03/2014) French Edition issued on 01-07-2014. (08/2014)
|
| DocumentType |
Revision
|
| ISBN |
978-1-7139-722-3
|
| Pages |
174
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| PD ISO/TR 13086-1:2011 | Gas cylinders. Guidance for design of composite cylinders Stress rupture of fibres and burst ratios related to test pressure |
| CSA E335.2.20 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR BATTERY POWERED TOOTH BRUSHES AND THEIR CHARGING AND BATTERY ASSEMBLIES |
| CSA E730.2.3 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| CSA Z314.7 : 2003(R2018) | STEAM STERILIZERS FOR HEALTH CARE FACILITIES |
| CSA E335.2.71 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| CSA M424.1 : 2016 | FLAMEPROOF NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN GASSY UNDERGROUND COAL MINES |
| CSA N285.0 : 2006 | GENERAL REQUIREMENTS FOR PRESSURE-RETAINING SYSTEMS AND COMPONENTS IN CANDU NUCLEAR POWER PLANTS |
| CSA E730.1 : 0 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - GENERAL REQUIREMENTS |
| CSA E742 : 1994 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
| CSA E79.18 : 1995 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M" |
| CSA E1029.2.1 : 1994 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| CSA E335.2.24 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR REFRIGERATORS, FOOD-FREEZERS AND ICE-MAKERS |
| CSA E335.1-2E : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CSA B140.7 : 2005 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| CSA E730.2.7 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES |
| CSA E1029.2.6 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR DIAMOND DRILLS WITH WATER SUPPLY |
| CAN/CSA-E1029-2-6-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Drills With Water Supply (Adopted IEC 1029-2-6:1993, first edition) | Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les foreuses à béton (norme CEI 1029-2-6:1993 adoptée, première édition) |
| CSA Z10083 : 2008 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| CAN/CSA-E1029-1-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 1: General Requirements (Adopted IEC 1029-1:1990, first edition, with Canadian deviations) | Sécurité des machines-outils électriques semi-fixes - Partie 1: Règles générales (norme CEI 1029-1:1990 adoptée, première édition, avec exigences propres au Canada) |
| CSA E61241.1.1 : 2002 : R2010 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACE TEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS |
| CSA E335.2.5 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| CSA C22.2 No. 1335.1 : 1993 : R2013 | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA E335.2.15 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR HEATING LIQUIDS |
| CSA C22.2 No. 1335.1 : 1993 : R2004 | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA 12.8 : 2002 : R2013 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| ANSI NGV4.8 :2012 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| ANSI HGV 2 : 2014 | COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS |
| C22.2 nº 1335 No. 1-93 (R2018) | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA E1029.2.3 : 1994 : INC : AMD 1 : 2006 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-3: PARTICULAR REQUIREMENTS FOR PLANERS AND THICKNESSERS |
| CSA C22.2 No. 140.3 : 2015 | REFRIGERANT-CONTAINING COMPONENTS FOR USE IN ELECTRICAL EQUIPMENT |
| CSA Z314.7 : 2003 : R2013 | STEAM STERILIZERS FOR HEALTH CARE FACILITIES |
| CSA Z314.7 : 2003 | STEAM STERILIZERS FOR HEALTH CARE FACILITIES |
| CSA Z662.1 : 2013 | COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS |
| B341-15 | UN pressure receptacles and multiple-element gas containers for the transport of dangerous goods |
| BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
| Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
| CSA C22.2 No. 62282-2 : 2007 : R2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| CSA E335.2.2 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER SUCTION CLEANING APPLIANCES |
| CSA E967 : 1994 | SAFETY OF ELECTRICALLY HEATED BLANKETS, PADS AND SIMILAR FLEXIBLE HEATING APPLIANCES FOR HOUSEHOLD USE |
| ISO/TR 13086-1:2011 | Gas cylinders - Guidance for design of composite cylinders Part 1: Stress rupture of fibres and burst ratios related to test pressure |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| CSA C22.2 No. 104 : 2011 : R2015 | HUMIDIFIERS |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
| ANSI/CSA AMERICA FC 3-2004 (R2017) | PORTABLE FUEL CELL POWER SYSTEMS |
| CSA FC 3 : 2004 | PORTABLE FUEL CELL POWER SYSTEMS |
| NFPA 59:2024 | Utility LP-Gas Plant Code |
| CSA E335.2.55 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
| CSA E335.2.4 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR SPIN EXTRACTORS |
| CSA B140.7.2 : 1967 | OIL-FIRED STEAM AND HOT-WATER BOILERS FOR COMMERCIAL AND INDUSTRIAL USE |
| CSA E335.2.65 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013 | CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
| CSA E335.2.19 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR BATTERY POWERED SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES AND THEIR CHARGING AND BATTERY ASSEMBLIES |
| CSA E1029.2.4 : 1994 : INC : AMD 1 : 2006 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-4: PARTICULAR REQUIREMENTS FOR BENCH GRINDERS |
| CSA E730.2.12 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CSA E335.2.57 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ICE CREAM APPLIANCES WITH INCORPORATED MOTOR COMPRESSORS |
| CSA E60335.1/4E : 2003 : R2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| CSA E730.2.12 : 1994 : INC : AMD 1 : 2001 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CSA E60335.1/4E :2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ANSI NGV4.8 : 2012 : R2013 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| CSA B140.0 : 2003 : R2013 | OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| CSA E1029.1 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| CSA Z142 : 2010 : R2014 | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
| CSA 4.9 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| CSA E730.2.12 : 1994 : R2013 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CSA/ANSI NGV 4.1-2018 | Natural gas vehicle (NGV) dispensing systems |
| CSA E1029.2.1 : 1994 : INC : AMD 2 : 2006 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| CSA C22.2 No. 1335.1 : 1993(R2008) | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
| CSA E730.2.6 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS |
| CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
| CSA Z314.1:2009 | ETHYLENE OXIDE STERILIZERS FOR HEALTH CARE FACILITIES |
| CSA B140.7 : 2005 : R2010 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| CSA Z8002 : 2014(R2018) | OPERATION AND MAINTENANCE OF HEALTH CARE FACILITIES |
| CSA E730.2.1 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES |
| CSA E79.6 : 0 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - OIL-IMMERSED APPARATUS |
| CSA C22.2 No. 125 : 1984 : INC : AMD 2 : 1986 | ELECTROMEDICAL EQUIPMENT |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
| CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
| CSA B366.1 :2011 : INC : UPD 1 : 2014 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
| CSA B366.1 : 2011 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| B620-14 (R2019) | Highway tanks and TC portable tanks for the transportation of dangerous goods |
| CSA E730.2.4 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR COMPRESSORS OF HERMETIC AND SEMI HERMETIC TYPE |
| CSA E335.2.33 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR COFFEE MILLS AND COFFEE GRINDERS |
| CSA Z318.6 : 0 | COMMISSIONING OF MEDICAL GAS SYSTEMS IN HEALTH CARE FACILITIES |
| CSA E335.1-3E : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CSA E335.2.14 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC KITCHEN MACHINES |
| 13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CSA E491 : 1994 | SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES |
| CSA NGV 4.3-2018 | Temperature compensation guideline for compressed natural gas vehicle fueling |
| CSA E335.2.61 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR THERMAL STORAGE HEATERS |
| CSA E1029.2.2 : 1994 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR RADIAL ARM SAWS |
| CSA E691 : 0 | THERMAL LINKS - REQUIREMENTS AND APPLICATION GUIDE |
| CSA E1029.2.3 : 1994 : INC : AMD 1 : 2006 : R2017 | Amendment 1:2006 to CAN/CSA-E1029-2-3-94, Safety of Transportable Motor-Operated Electric Tools - Part 2-3: Particular Requirements for Planers and Thicknessers (Adopted Amendment 1:2001 to CEI/IEC 1029-2-3:1993) |
| CSA N285.3 : 0 | REQUIREMENTS FOR CONTAINMENT SYSTEMS COMPONENTS IN CANDU NUCLEAR POWER PLANTS |
| CSA E1029.2.7 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR DIAMOND SAWS WITH WATER SUPPLY |
| CAN/CSA-E1029-2-2-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Radial Arm Saws (Adopted IEC 1029-2-2:1993, first edition)| Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les scies radiales (norme CEI 1029-2-2:1993 adoptée, première édition) |
| CSA 12.8 :2002 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| CSA E1029.2.2 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2: PARTICULAR REQUIREMENTS FOR RADIAL ARM SAWS |
| CSA E335.2.70 : 95(R2004) | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR MILKING MACHINES |
| CSA C22.2 No. 62282-3-100 : 2015 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
| CSA 12.5 : 1999 : R2014 | NGV DISPENSING SYSTEMS |
| CSA Z275.1 : 2016 | HYPERBARIC FACILITIES |
| C22.2 NO. 109-17 | Commercial cooking appliances |
| CSA B108 : 2014 | COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE |
| CSA C22.2 No. 309 : 2016 | INDUSTRIAL CLOTHES DRYERS |
| CSA Z267 : 2000 | SAFETY CODE FOR AMUSEMENT RIDES AND DEVICES |
| ANSI HPRD 1 : 2013(R 2018) | THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| CSA E335.2.63 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WATER BOILERS AND LIQUID HEATERS |
| CSA Z305.1 : 0 | NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| CSA SPE.1000 : 2013 | MODEL CODE FOR THE FIELD EVALUATION OF ELECTRICAL EQUIPMENT |
| CSA B140.7:2005 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| CSA B140.7 : 2005 : R2014 | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| N285.0-17/N285.6 SERIES-17 | General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants |
| CSA C22.2 No. 125 : 1984 : R1992 | ELECTROMEDICAL EQUIPMENT |
| CSA C22.2 No. 68 : 2000( R2014) | MOTOR-OPERATED APPLIANCES (HOUSEHOLD AND COMMERCIAL) |
| CSA C22.2 No. 139 : 2013 : R2018 | ELECTRICALLY OPERATED VALVES |
| CSA Z305.6 : 1992 | MEDICAL OXYGEN CONCENTRATOR CENTRAL SUPPLY SYSTEM FOR USE WITH NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R201300 | PARK MODEL TRAILERS |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800 | PARK MODEL TRAILERS |
| CSA B366.1 : 2011 : R2015 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
| B52-13 | Mechanical refrigeration code |
| CSA Z241 SERIES : 2003 | PARK MODEL TRAILERS |
| CSA N290.8 : 2015 | TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| CSA E335.2.18 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - GUIDE FOR PREPARING SAFETY REQUIREMENTS FOR BATTERY POWERED MOTOR OPERATED APPLIANCES AND THEIR CHARGING BATTERY ASSEMBLIES |
| CSA E335.2.53 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC SAUNA HEATING APPLIANCES |
| CSA E342.1 : 1995 | SAFETY REQUIREMENTS FOR ELECTRIC FANS AND REGULATORS - PART 1: FANS AND REGULATORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| C22.2 NO. 22-18 | Electrical equipment for flammable and combustible fuel dispensers |
| CSA B140.7.1 : 76(R2001) | OIL-FIRED STEAM AND HOT-WATER BOILERS FOR RESIDENTIAL USE |
| CSA M424.2 : 2016 | NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN NON-GASSY UNDERGROUND MINES |
| CSA B109 : 2017 | NATURAL GAS FOR VEHICLES INSTALLATION CODE |
| B52HB-16 | A practical handbook for implementing CSA B52-13, Mechanical refrigeration code |
| CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
| CSA E335.2.13 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES |
| CSA E257 : 0 | FUSEHOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| CSA C22.2 No. 151 : 1986 | LABORATORY EQUIPMENT |
| CSA B140.12 : 2003 : R2013 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
| CSA 12.6 :2004 | VEHICLE REFUELLING APPLIANCES |
| CSA E335.2.3 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC IRONS |
| CSA E1029.2.5 : 1994 : INC : AMD 1 : 2006 : R2017 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CSA E1029.2.4 : 1994 : INC : AMD 1 : 2006 : R2017 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-4: PARTICULAR REQUIREMENTS FOR BENCH GRINDERS |
| CSA E335.2.12 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| CSA B140.12:2003 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
| CSA C22.2 No. 1335.1 : 1993(R2013) | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA E335.2.10 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| CSA E730.2.2 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS |
| CSA E335.2.5 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| CSA B140.0 : 2003 | OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
| CSA E1029.2.5 : 1994 : R2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CSA E61241.1.1 : 2002 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACE TEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS |
| CSA C22.2 No. 120 : 2013 | REFRIGERATION EQUIPMENT |
| B365-17 | Installation code for solid-fuel-burning appliances and equipment |
| B340-14 | Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, class 2 |
| CSA 12.5 : 1999 : R2004 | NGV DISPENSING SYSTEMS |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| CGA B105 : 1993 | CODE FOR DIGESTER GAS AND LANDFILL GAS INSTALLATIONS |
| CSA C22.2 No. 68 : 2009 : INC : UPD 2 : 2010 | MOTOR-OPERATED APPLIANCES (HOUSEHOLD AND COMMERCIAL) |
| B622-14 (R2019) | Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2 |
| CSA C22.2 No. 139 : 2013 | ELECTRICALLY OPERATED VALVES |
| UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
| CSA B149HB : 2005 | NATURAL GAS AND PROPANE CODE HANDBOOK |
| CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
| CSA B149.2:20 | Propane storage and handling code |
| CSA B149.1 : 2010 : R2015 | NATURAL GAS AND PROPANE INSTALLATION CODE |
| CSA B149.1 : 2010 | NATURAL GAS AND PROPANE INSTALLATION CODE |
| ANSI/CSA-B149.6-15 | Code for digester gas, landfill gas, and biogas generation and utilization |
| CSA C22.2 No. 104:2011 | HUMIDIFIERS |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500 | HUMIDIFIERS |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| CSA Z314.1 : 2009 : R2013 | ETHYLENE OXIDE STERILIZERS FOR HEALTH CARE FACILITIES |
| CSA S500 : 2014 | THERMOSYPHON FOUNDATIONS FOR BUILDINGS IN PERMAFROST REGIONS |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| C22.2 NO. 165-17 | Electric boilers |
| CSA E335.2.9 : 0 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR TOASTERS, GRILLS, ROASTERS AND SIMILAR APPLIANCES |
| CSA 12.6 : 2004 : R2014 | VEHICLE REFUELLING APPLIANCES |
| CSA B140.7 : 2005 : R2010 : FR | OIL-BURNING EQUIPMENT: STEAM AND HOT-WATER BOILERS |
| CSA E730.2.5 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| CSA E335.2.31 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR RANGE HOODS |
| CSA E335.2.59 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| CSA E335.2.10 : 1994 : R2004 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| CSA E730.2.10 : 1994 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED MOTOR STARTING RELAYS |
| CSA E335.2.12 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| CSA Z10083 : 2008 : R2013 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| CSA Z142 : 2010 : FR | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
| CSA E1029.2.1 : 1994 : INC : AMD 2 : 2006 : R2017 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| CSA E730.2.12 : 1994 : INC : AMD 1 : 2001 : R2013 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| ANSI NGV4.8 : 2012 : R2016 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| CSA 12.8 : 2002 : R2016 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
| CAN/CSA-E1029-2-7-94 (R2017) | Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Saws With Water Supply (Adopted IEC 1029-2-7:1993, first edition) | Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les tronçonneuses à béton (norme CEI 1029-2-7:1993 adoptée, première édition) |
| S157-17/S157.1-17 | Strength design in aluminum / Commentary on CSA S157-17, Strength design in aluminum |
| CSA C22.2 No. 68 : 2009 | MOTOR-OPERATED APPLIANCES (HOUSEHOLD AND COMMERCIAL) |
| CSA A5-A8-A362 : 1998 | PORTLAND CEMENT; MASONRY CEMENT; BLENDED HYDRAULIC CEMENT |
| C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
| CSA E335.2.57 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ICE CREAM APPLIANCES WITH INCORPORATED MOTOR COMPRESSORS |
| CSA Z142 :2010 | CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS |
| CSA E335.2.3 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR ELECTRIC IRONS |
| B214-16 | Installation code for hydronic heating systems |
| CSA C22.2 No. 60335-2-89 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR |
| ANSI Z21.96 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
| CSA 11-6 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| CSA C22.2 No. 62282-2 :2007 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| CSA E335.2.23 : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| CSA E335.2.66 : 1995 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS |
| SAE J 2601/2 : 2014 | FUELING PROTOCOL FOR GASEOUS HYDROGEN POWERED HEAVY DUTY VEHICLES |
| CSA C22.2 No. 125 : 1984 | ELECTROMEDICAL EQUIPMENT |
| CSA C22.2 NO. 81:14 (R2019) | Electric irons |
| CSA E384.14.1 : 1995 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL D |
| CSA E60079.1 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - CONSTRUCTION AND VERIFICATION TEST OF FLAMEPROOF ENCLOSURES OF ELECTRICAL APPARATUS |
| CSA B149.2 : 2010 : R2015 | PROPANE STORAGE AND HANDLING CODE |
| CSA B149.2:2010 | PROPANE STORAGE AND HANDLING CODE |
| CSA Z240 VC SERIES : 2014 | |
| B149.5-15 | Installation code for propane fuel systems and containers on motor vehicles |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 19078:2013 | Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| ASME B31.1 : 2016 | POWER PIPING |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| ASTM D 1400 : 2000 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) |
| B340-14 | Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, class 2 |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| B149.5-15 | Installation code for propane fuel systems and containers on motor vehicles |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| B339-14 | Cylinders, spheres, and tubes for the transportation of dangerous goods |
| CSA B108 : 2014 | COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASME B31.3:2016 | PROCESS PIPING |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| ASTM D 2344/D2344M : 2016 : REDLINE | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| ASME PV CODE 4 : 2017 | BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
| ANSI PRD 1 : 2013(R2018) | PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
| ANSI K61.1 : 1999 | SAFETY REQUIREMENTS FOR THE STORAGE AND HANDLING OF ANHYDROUS AMMONIA |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| CGA G 5.4 : 2012 | STANDARD FOR HYDROGEN PIPING SYSTEMS AT USER LOCATIONS |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| ASME PV CODE 10 : 2017 | BOILER AND PRESSURE VESSEL CODE - FIBER-REINFORCED PLASTIC PRESSURE VESSELS |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
| ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| BS EN 13322-2:2003 | Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel |
| API 530 : 2015 | CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
| ASTM D 1186 : 2001 | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| B52-13 | Mechanical refrigeration code |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| CSA Z299.4 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 4 |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| CSA ISO 9001 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| ASME PV CODE 2B : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| CFR 49(PTS178-199) : OCT 2017 | TRANSPORTATION |
| CSA Z299.2 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 2 |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| CGSB 48.9712 : 2014 | NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF PERSONNEL |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| CSA B109 : 2017 | NATURAL GAS FOR VEHICLES INSTALLATION CODE |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASME CSD1 : 2012 | CONTROLS AND SAFETY DEVICES FOR AUTOMATICALLY FIRED BOILERS |
| CSA Z299.3 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 3 |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| CSA Z299.1 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 1 |
US$266.10
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - French
PDF - French
Hardcopy - English
PDF - English
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.