ASTM D 495 : 2014
|
Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
|
SAE J 400 : 2012
|
TEST FOR CHIP RESISTANCE OF SURFACE COATINGS
|
ASTM D 1602 : 60(1980)
|
TEST METHOD FOR BEARING LOAD OF CORRUGATED REINFORCED PLASTICS PANELS
|
ASTM D 732 : 2017 : REDLINE
|
Standard Test Method for Shear Strength of Plastics by Punch Tool
|
ASTM C 518 : 2017 : REDLINE
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
|
ACI 440.1R : 2015
|
GUIDE FOR THE DESIGN AND CONSTRUCTION OF STRUCTURAL CONCRETE REINFORCED WITH FIBER-REINFORCED POLYMER (FRP) BARS
|
ASTM D 3045 : 1992
|
PRACTICE FOR HEAT AGING OF PLASTICS WITHOUT LOAD
|
CSA S304.1 : 2004
|
DESIGN OF MASONRY STRUCTURES
|
CSA A3000 : 2013
|
CEMENTITIOUS MATERIALS COMPENDIUM
|
CSA O86 : 2014
|
ENGINEERING DESIGN IN WOOD
|
ASTM D 5229/D5229M : 2014-06
|
TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS
|
ASTM D 1141 : 1998 : EDT 1
|
Standard Practice for the Preparation of Substitute Ocean Water
|
CSA S16 : 2014
|
DESIGN OF STEEL STRUCTURES
|
ASTM D 4541 : 2017 : REDLINE
|
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
|
ASTM D 543 : 2014 : REDLINE
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
|
ASTM C 617/C617M : 2015 : REDLINE
|
Standard Practice for Capping Cylindrical Concrete Specimens
|
ASTM D 4329 : 2013 : REDLINE
|
Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
|
ASTM D 2344/D2344M : 2016 : REDLINE
|
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
|
ASTM D 792 : 2013 : REDLINE
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
|
CSA S413 : 2014
|
PARKING STRUCTURES
|
ASTM D 5379/D5379M : 2012 : REDLINE
|
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
|
ASTM D 3410/D3410M : 2016 : REDLINE
|
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
|
ACI 216R : 1989(R2001)
|
GUIDE FOR DETERMINING FIRE ENDURANCE OF CONCRETE ELEMENTS
|
ASTM C 192/C192M : 2016-04
|
PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY
|
ASTM D 2247 : 2015 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
|
ASTM G 154 : 2016 : REDLINE
|
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
|
ASTM C 581 : 2015 : REDLINE
|
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
|
ASTM D 696 : 2016 : REDLINE
|
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
|
A23.3-14
|
Design of concrete structures
|
CSA A23.4 : 2016
|
PRECAST CONCRETE - MATERIALS AND CONSTRUCTION
|
ASTM E 1142 : 2015 : REDLINE
|
Standard Terminology Relating to Thermophysical Properties
|
CSA S478 : 0
|
GUIDELINE ON DURABILITY OF BUILDINGS
|
ASTM C 234 : 1991 : REV A
|
Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel (Withdrawn 2000)
|
EN 1992-1-2:2004/AC:2008
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
|
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
ASTM D 2734 : 2016 : REDLINE
|
Standard Test Methods for Void Content of Reinforced Plastics
|
ASTM D 3171 : 2015 : REDLINE
|
Standard Test Methods for Constituent Content of Composite Materials
|
ASTM D 1037 : 2012 : REDLINE
|
Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
|
ASTM E 662 : 2017-02
|
TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS
|
ASTM D 648 : 2016
|
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
|
ASTM D 5420 : 2016 : REDLINE
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
|
ASTM E 104 : 2002
|
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
|
ASTM D 4065 : 2012 : REDLINE
|
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
|
ASTM D 257 : 2014 : REDLINE
|
Standard Test Methods for DC Resistance or Conductance of Insulating Materials
|
ASTM D 3039/D3039M : 2017 : REDLINE
|
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
|
ASTM D 695 : 2015 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Plastics
|
ASTM D 5028 : 2017 : REDLINE
|
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
|
ASTM D 570 : 1998 : R2018
|
Standard Test Method for Water Absorption of Plastics
|
CSA A23.1 A23.2 : 2014
|
CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE
|
ASTM C 494/C494M : 2017 : REDLINE
|
Standard Specification for Chemical Admixtures for Concrete
|
ASTM C 393/C393M : 2016 : REDLINE
|
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
|
ASTM D 2990 : 2017 : REDLINE
|
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
|
S6-14
|
Canadian Highway Bridge Design Code
|
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics
|
ASTM D 746 : 2014 : REDLINE
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
|
ASTM D 3841 : 2016 : REDLINE
|
Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
|