• There are no items in your cart

DD CLC/TS 62046:2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Safety of machinery. Application of protective equipment to detect the presence of persons
Available format(s)

Hardcopy , PDF

Superseded date

07-13-2018

Language(s)

English

Published date

09-30-2008

INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
  3.1 Terms and definitions
  3.2 Abbreviations
4 Selection of protective measures
  4.1 Procedure (relationship with ISO 12100 (all parts))
  4.2 Machine characteristics
      4.2.1 Suitability of protective equipment
      4.2.2 Suitability of protective equipment as a trip device
  4.3 Environmental characteristics
  4.4 Uses of protective equipment
      4.4.1 General
      4.4.2 Trip device
      4.4.3 Presence sensing device
      4.4.4 Combination trip and presence sensing device
  4.5 Human characteristics
      4.5.1 General
      4.5.2 Approach speed (K)
      4.5.3 Penetration/encroachment factor (C)
      4.5.4 Ability to circumvent protective equipment
  4.6 Protective equipment characteristics
      4.6.1 ESPEs
      4.6.2 Pressure sensitive mats and floors
  4.7 Machine control system functions associated with the
      application of protective equipment
      4.7.1 General
      4.7.2 Stopping performance monitoring (SPM)
      4.7.3 Muting
      4.7.4 Reinitiation of cyclic operation by the protective
            equipment
      4.7.5 Start interlock
      4.7.6 Restart interlock
      4.7.7 Blanking
      4.7.8 External Device Monitoring (EDM)
      4.7.9 Provision of machine control functions
5 General application requirements
  5.1 Positioning and configuration of the protective equipment
     detection zone
  5.2 Integration with the safety-related control system
  5.3 Performance of protective equipment
      5.3.1 General
      5.3.2 Classification of protective equipment
  5.4 Stopping performance monitoring
  5.5 Muting
      5.5.1 General
      5.5.2 Muting to allow access by persons
      5.5.3 Muting to allow access by materials
      5.5.4 Mute dependent override
  5.6 Reinitiation of cyclic operation by the protective equipment
      5.6.1 General
      5.6.2 Particular requirements for press applications
  5.7 Start interlock
  5.8 Restart interlock
  5.9 Blanking
6 Particular application requirements for specific protective equipment
  6.1 AOPDs
      6.1.1 General
      6.1.2 Light beam device(s)
      6.1.3 Light curtains
  6.2 AOPDDRs
  6.3 PIPDs
      6.3.1 General
      6.3.2 Mobile applications
  6.4 Pressure-sensitive mats and floors
      6.4.1 Pressure sensitive floors
      6.4.2 Pressure sensitive mats
7 Inspection and test
  7.1 General
  7.2 Initial inspection and test
  7.3 Periodic inspection and test
  7.4 Functional checks
8 Information for safe use
Annex A (informative) - Examples of interfacing ESPEs to a machine
Annex B (informative) - Summary of minimum type test requirements
        for various protective equipment
Annex C (informative) - Application examples
Annex D (informative) - Protective devices for the detection of the
        position of a person
Annex E (informative) - Additional recommendations for the application
        of AOPDDRs
Annex F (informative) - Additional recommendations for the
        configuration of photoelectric muting sensors when
        used to allow access by materials
Annex G (informative) - Periodic test intervals for Type 2 ESPE
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications
Bibliography

Describes requirements for the selection, positioning, configuration and commissioning of protective equipment to detect the presence of persons in order to protect those persons from dangerous part(s) of machinery in industrial applications.

It specifies requirements for the selection, positioning, configuration and commissioning of protective equipment to detect the presence of persons in order to protect those persons from dangerous part(s) of machinery in industrial applications. This technical specification covers the application of electro-sensitive protective equipment (ESPE) specified in IEC 61496 (all parts) and pressure sensitive mats and floors specified in ISO 13856-1. It takes into account the characteristics of the machinery, the protective equipment, the environment and human interaction by persons of 14 years and older. It constitutes a general technical revision of the first edition, and includes further examples of interfacing and muting techniques.

Committee
MCE/3
DevelopmentNote
Supersedes 06/30155798 DC. (09/2008)
DocumentType
Standard
Pages
106
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
CLC/TS 62046:2008 Identical

PD 5304:2014 Guidance on safe use of machinery
PD 5304:2005 GUIDANCE ON SAFE USE OF MACHINERY

ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
CLC/TS 61496-2:2006 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
EN 1525:1997 Safety of industrial trucks - Driverless trucks and their systems
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC TR 62513:2008 Safety of machinery - Guidelines for the use of communication systems in safety-related applications
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
CLC/TS 61496-3:2008 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
IEC 61496-3:2008 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
US$378.52
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.