• There are no items in your cart

DEFSTAN 00-101(PT2)/2(2008) : 2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES
Available format(s)

Hardcopy , PDF

Superseded date

02-16-2023

Language(s)

English

Published date

01-01-2008

0. INTRODUCTION
1. SCOPE
2. WARNING
3. RELATED DOCUMENTS
4. DEFINITIONS AND ABBREVIATIONS
5. AMENDMENT
6. SPONSORSHIP OF THE REQUIREMENT AND SECURITY
7. STATUTORY LEGISLATION AND MOD REGULATION FOR PLATFORM
   EXPLOSIVE SAFETY
8. INTRODUCTION TO PLATFORM EXPLOSIVES SAFETY AND CERTIFICATION
   Background
   Platform Explosives Safety Management Drivers
   Platform Explosives Safety Management Process
9. DESIGN FOR PLATFORM EXPLOSIVES SAFETY INCORPORATING THREAT
   HAZARD ASSESSMENT & LINES OF DEFENCE
APPENDIX 1 - INTEGRATING ORDNANCE MUNITIONS EXPLOSIVES INTO
             MOD SUBMARINES
   1.1 Description
   1.2 Performance Requirements - Basic Principles for the
         Safety and Protection of WSCs, Magazines and Explosives
         in MoD Submarines
   1.3 ACOP - JSP 862 and other Safety and Environmental
         Management Systems (SEMS)
   1.4 ACOP for Stowage of Explosives by UN Hazard
         Classification Code
   1.5 ACOP - Basic Principles of Capacity and Size
   1.6 Guidance - Stowage of Explosives by UN Hazard
         Classification Code
   1.7 Guidance - Basic Principles for Environmental Hazards
APPENDIX 2 - DESIGNATED DANGER AREAS (DDAs)
   2.1 Description
   2.2 Performance Requirements for DDAs
   2.3 ACOP for DDAs
   2.4 ACOP for Marking of Areas around Launchers
   2.5 Guidance - DDAs
APPENDIX 3 - ADJACENT COMPARTMENTS
   3.1 Description
   3.2 Performance Requirements for Adjacent Compartments
   3.3 ACOP for Reduction of Hazards from Adjacent Compartments
   3.4 ACOP for POL and Tanks Adjacent to a WSC/Magazine
   3.5 ACOP for Smoke/Heat Detectors in Adjacent Compartments
   3.6 Guidance - Adjacent Compartments
   3.7 Guidance - POL Products in Adjacent Compartments
   3.8 Guidance - Smoke/Heat Detectors in Adjacent Compartments
APPENDIX 4 - GENERAL WSC/MAGAZINE CONSTRUCTION REQUIREMENTS
   4.1 Description
   4.2 Performance Requirements for General WSC/Magazine
         Construction
   4.3 ACOP for Structural Integrity of WSCs/Magazines
   4.4 ACOP for General WSC Construction Requirements
   4.5 ACOP for Hydraulic Systems in WSCs/Magazines
   4.6 ACOP for Air Systems in WSCs/Magazines
   4.7 ACOP for Electrical Equipment and System Requirements
   4.8 ACOP for Non-Electrical Equipment Requirements in
         WSCs/Magazines
   4.9 ACOP for Painting and Preservation in WSCs/Magazines
   4.10 ACOP for Pumping/Flooding Arrangements in WSCs/Magazines
   4.11 ACOP for Access to WSCs/Magazines
   4.12 ACOP for Emergency Lighting in WSCs/Magazines
   4.13 ACOP for Contents of WSCs
   4.14 ACOP for Contents of Magazines, Small Magazines and ESLs
   4.15 ACOP for WSC/Magazine Hazard Warning/Safety Signs &
         Notices
   4.16 Guidance - Safety Assessment within the WSC/Magazine
   4.17 Guidance - General WSC Construction Requirements
   4.18 Guidance - Use of Flammable Hydraulic Fluids
   4.19 Guidance - Pumping/Flooding for WSCs/Magazines
   4.20 Guidance - Access to WSCs/Magazines
   4.21 Guidance - Emergency Lighting for WSCs/Magazines
   4.22 Guidance - Magazine Designed Capacity Lists
   4.23 Guidance - Safety Signs and Notices
   4.24 Guidance - Use of the WSC for Temporary Accommodation
APPENDIX 5 - MUNITION STOWAGES AND FITTINGS
   5.1 Description
   5.2 Performance Requirements for Munition Stowages and
         Fittings
   5.3 ACOP for General Munition Stowage Requirements
   5.4 ACOP for Clearance between Stowages and Adjacent
         Boundaries
   5.5 ACOP for Identification of Stowages and Stowage Capacity
   5.6 Guidance - Safe Stowage
   5.7 Guidance - Clearances between Stowages and Adjacent
         Boundaries
APPENDIX 6 - EXPLOSIVES STORE LOCKERS (ESL)/MAGAZINE LOCKERS
   6.1 Description
   6.2 Performance Requirements for ESL/Magazine Locker Design
   6.3 Performance Requirements for ESL/Magazine Locker
         Flooding Arrangements
   6.4 Performance Requirements for Siting and Installation
         of ESLs/Magazine Lockers
   6.5 ACOP for ESL/Magazine Locker Design
   6.6 ACOP for ESL/Magazine Locker Flooding Arrangements
   6.7 ACOP for Siting and Installation of ESLs/Magazine
         Lockers
   6.8 ACOP for Specific Locker Requirements
   6.9 ACOP for General Locker Notices and Notice Boards
   6.10 ACOP for ESL/Magazine Locker Contents
   6.11 Guidance - ESL/Magazine Lockers
   6.12 Guidance - Ready Use Magazines/Lockers
APPENDIX 7 - TORPEDO TUBES, LAUNCH TUBES AND UNDERWATER STORES
             EJECTOR SYSTEMS
   7.1 Description
   7.2 Performance Requirements for Tubes and Launchers
   7.3 Performance Requirements for Torpedo and Missile Tubes
   7.4 Performance Requirements for Underwater Stores
         Launch/Ejector Tubes
   7.5 ACOP for Torpedo and Missile Tubes
   7.6 ACOP for Underwater Stores Launch/Ejector Tubes
   7.7 ACOP for External Launcher/Ejector Tubes
   7.8 Guidance - Torpedo Tubes and Underwater Ejector Systems
   7.9 Guidance - External Launcher/Ejector Tubes
APPENDIX 8 - EXTRAORDINARY EMBARKATION OF EXPLOSIVES (E3)
   8.1 Description
   8.2 Performance Requirements for Stowage of E3 Munitions
   8.3 Performance Requirements for Assault Routes
   8.4 ACOP for Stowage of E3 Munitions
   8.5 ACOP for Assault Routes
   8.6 ACOP for Munition Layout and Configuration
   8.7 Guidance - Stowage of E3 Munitions in Submarines
   8.8 Guidance - Munition Layout and Configuration
APPENDIX 9 - AIR CONDITIONING/VENTILATION SYSTEMS
   9.1 Description
   9.2 Performance Requirements for Air
         Conditioning/Ventilation Systems
   9.3 ACOP for Environmental Requirements
   9.4 ACOP for Ventilation System Design and Installation
   9.5 ACOP for Ventilation Trunking
   9.6 ACOP for Ventilation Isolation Arrangements
   9.7 ACOP for Ventilation Valve - Local and Remote
         Operating Positions
   9.8 ACOP for Ventilation System Notices
   9.9 Guidance - Air Conditioning/Ventilation Systems
APPENDIX 10 - FIRE PREVENTION AND FIRE FIGHTING ARRANGEMENTS
   10.1 Description
   10.2 Performance Requirements for General Fire Fighting
         Arrangements
   10.3 ACOP for Fire Prevention in Submarine Explosives Areas
   10.4 ACOP for Common Principles of Fire Detection and
         Control Systems
   10.5 ACOP for General Principles for WSC Water Fog Systems
   10.6 ACOP for WSC Firefighting Systems in S, T and V Class
         Submarines
   10.7 ACOP for WSC Firefighting Systems Water Supply in S,
         T and V Class Submarines
   10.8 ACOP for WSC/Magazine Water Fog System Signs/Notices
   10.9 ACOP for First Aid Fire Fighting Equipment in
         WSC/Magazines
   10.10 ACOP for Fire Fighting Arrangements in DDAs
   10.11 Guidance - Fire Prevention
   10.12 Guidance - Fire Fighting Arrangements - General
   10.13 Guidance - Design Requirements for Smoke and Heat
         Detection
   10.14 Guidance - Design Requirements for Spray Coverage
   10.15 Guidance - Requirements for Free Air Space
   10.16 Guidance - Integration of Fire Alarm Systems
   10.17 Guidance - Munition Fire Characteristics (see NAN
         EXP/03 Issue 2)
   10.18 Guidance on First Aid Fire Fighting Equipment for
         WSC/Magazines and DDAs
APPENDIX 11 - MITIGATION METHODS TO PREVENT INITIATION OR
              REDUCE CONSEQUENCES FROM MUNITION INCIDENTS
   11.1 Description
   11.2 Performance Requirements for Explosives Mitigation
         Methods
   11.3 ACOP for Mitigation Methods
   11.4 ACOP for Mitigation of Fire
   11.5 ACOP for Mitigation of RATTAM Threats
   11.6 ACOP for Mitigation of Blast Overpressure and Under
         Water Shock
   11.7 ACOP for Mitigation of Sympathetic Reaction
   11.8 ACOP for Mitigation of Rocket Efflux and Propulsive
         Reaction
   11.9 ACOP for Mitigation of Stowage of Shaped Charge
         Warheads including Demolition Munitions
   11.10 Guidance - Deriving Protection and Mitigation Methods
   11.11 Guidance - Assessment of RATTAM Protection
APPENDIX 12 - SECURITY AND ANTI-SABOTAGE ARRANGEMENTS
   12.1 Description
   12.2 Performance Requirements for Security and Anti
         Sabotage
   12.3 ACOP for Security of Doors, Hatches, Manholes and
         Escape Scuttles
   12.4 ACOP for Security Arrangements
   12.5 Guidance on Security and Anti-Sabotage Arrangements
APPENDIX 13 - AMMUNITION HANDLING - EMBARKING, STOWING
              AND SUPPLY
   13.1 Description
   13.2 Performance Requirements for Ammunition Handling
         Safety Policy
   13.3 Performance Requirements for Ammunition Handling -
         New Development
   13.4 Performance Requirements for Ammunition Routes
   13.5 Performance Requirements for Handling/Lifting Equipment
   13.6 ACOP for Ammunition Handling
   13.7 ACOP for Ammunition Routes
   13.8 ACOP for Handling/Lifting Equipment in WSCs/Magazines
         and DDAs
   13.9 ACOP for Ammunition Route Drawings
   13.10 Guidance - Ammunition Handling Safety Assessment
   13.11 Guidance - Mechanical Handling Equipment in a
         Submarine Environment
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS
ANNEX C - DEFINITIONS
ANNEX D - RN FORM S285K

Applies to the design, construction and ship fitting of all MOD Ships built to MOD or Classification Society constructional standards and operated by the Royal Navy, Army (including E3), Royal Air Force, RFA or Marine Services.

DevelopmentNote
Supersedes DEFSTAN 00-101(PT2)/1(2005). (08/2008) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (09/2017)
DocumentType
Standard
Pages
111
PublisherName
UK Ministry of Defence Standards
Status
Superseded
SupersededBy
Supersedes

DEFSTAN 08-107/3(2013) : 2013 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
DEFSTAN 02-136/3(2010) : 2010 DESIGN POLICY, PRINCIPLES, TESTING AND ACCEPTANCE REQUIREMENTS FOR WATERTIGHT INTEGRITY OF SUBMARINES

NES 114 : ISSUE 2 REQUIREMENTS FOR REPLENISHMENT AT SEA - SURFACE SHIPS
DEFSTAN 02-603/2(2001) : INTERIM REQUIREMENTS FOR THE POLICY, DESIGN AND INSTALLATION OF FIRE DETECTION SYSTEMS IN SHIPS
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
AOP 39 : 2010 GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM)
DEFSTAN 07-279/3(2006) : 2006 AMD 1 2007 REQUIREMENTS FOR REPLENISHMENT AT SEA HM SURFACE SHIPS
NES 814 : ISSUE 1 REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT
NES 784 : ISSUE 3 AMD 1 REQUIREMENTS FOR SAFETY SIGNS AND COLOURS
DEFSTAN 02-113/1(2005) : 2005 REQUIREMENT FOR MECHANICAL HANDLING
DEFSTAN 02-784/3(2007) : 2007 REQUIREMENTS FOR SAFETY SIGNS AND COLOURS
NES 360 : ISSUE 3 AMD 3 LIST OF PREFERRED STANDARD VALVES (METRIC)
DEFSTAN 08-123/1(2000) : 2000 REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2
NES 142 : ISSUE 3 REQUIREMENTS FOR PADLOCKS
NES 127 : ISSUE 1 AMD 3 REQUIREMENTS FOR ACCESS FITTINGS AND EQUIPMENT
DEFSTAN 59-41(PT3)/5(1995) : 1995 ELECTROMAGNETIC COMPATIBILITY - PART 3: TECHNICAL REQUIREMENTS TEST METHODS AND LIMITS
DEFSTAN 00-56(PT2)/4(2007) : 2007 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1
NES 1004 : ISSUE 2 AMD 1 REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS
NES 703 : ISSUE 1 AMD 1 THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY
NES 502 : ISSUE 4 AMD 2 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS
NES 361 : ISSUE 2 VALVE ROD GEARING
DEFSTAN 08-146/1(2001) : 2001 REQUIREMENTS FOR LOCKERS (MAGAZINE, READY-USE MAGAZINE AND DETONATORS) USED FOR THE STOWAGE OF EXPLOSIVE STORES IN HM SURFACE SHIPS AND HM SUBMARINES
DEFSTAN 00-101(PT3)/1(2005) : 2005 DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION
DEFSTAN 08-120/1(2000) : 2000 REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT - CATEGORY 2
NES 603 : ISSUE 1 GUIDE TO THE POLICY AND INSTALLATION OF FIRE DETECTION SYSTEMS IN SHIPS
DEFSTAN 02-361/1(2000) : 2000 VALVE ROAD GEARING (LTD CIRC) CATEGORY 3
DEFSTAN 02-127/1(2000) : 2000 ACCESS FITTINGS AND EQUIPMENT
DEFSTAN 08-107/2(2001) : 2001 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROMECHANICAL AND NAVAL WEAPON EQUIPMENT - CATEGORY 2
NES 102 : ISSUE 1 REQUIREMENTS FOR AIR CONDITIONING & VENTILATION DESIGN
DEFSTAN 02-188/1(2000) : 2000 REQUIREMENTS FOR THE PROCUREMENT, STORAGE AND USE OF TIMBER
NES 314 : ISSUE 1 AMD 1 COMPRESSED AIR SYSTEMS
DEFSTAN 02-703/1(2000) : 2000 THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY
NES 188 : ISSUE 1 AMD 1 REQUIREMENTS FOR THE PROCUREMENT, STORAGE AND USE OF TIMBER
STANAG 4240 : 2003 LIQUID FUEL/EXTERNAL FIRE, MUNITION TEST PROCEDURES
DEFSTAN 00-101(PT5)/1(2008) : 2008 DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 5: SHIP WEAPON DYNAMIC SAFETY
DEFSTAN 02-141/1(2000) : 2000 REQUIREMENTS AND ORGANIZATION FOR THE MANAGEMENT ACCESS TO AND WITHIN COMPARTMENTS (SURFACE SHIPS) CATEGORY N/A
DEFSTAN 08-147(PT2)/1(2000) : 2000 REQUIREMENTS FOR DAMAGE CONTROL AND FIRE PROTECTION FOR THE SAFETY OF SURFACE SHIPS AND SUBMARINES - CATEGORY 1 - PART 2: SUBMARINES
NES 748 : ISSUE 3 STRAINERS, PREFERRED RANGE
DEFSTAN 02-712/1(2000) : 2000 REQUIREMENTS FOR SEWAGE AND GREY - WATER SYSTEMS FOR SURFACE SHIPS (OBSOLESCENT) CATEGORY 2
STANAG 4439 : 2010 POLICY FOR INTRODUCTION AND ASSESSMENT OF INSENSITIVE MUNITIONS (IM)
DEFSTAN 08-104/1(2000) : 2000 COMPRESSED AIR SYSTEMS - CATEGORY 2
DEFSTAN 02-748/2(2002) : 2002 REQUIREMENTS FOR STRAINERS IN HM SURFACE SHIPS AND SUBMARINES
NES 501 : RESTRICTED GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
DEFSTAN 00-56(PT1)/4(2007) : 2007 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS
DEFSTAN 02-360/2(2001) : 2001 GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES
DEFSTAN 02-502/1(2000) : 2000 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS CATEGORY 2
NES 712 : ISSUE 5 REQUIREMENTS FOR SEWAGE AND GREY WATER SYSTEMS FOR SURFACE SHIPS
DEFSTAN 07-207/1(2000) : 2000 REQUIREMENTS FOR PADLOCKS - CATEGORY 3

View more information
US$95.83
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.