DEFSTAN 02-121(PT1)/3(2010) : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
05-14-2017
English
01-01-2010
Foreword
1 Scope
2 Warning
3 Normative References
4 General Requirements
5 Drawings
6 General Design Requirements
7 Environmental Conditions
8 Material
9 Service
10 Finish
11 Information Plates
12 Installation of Equipment
13 Inspections
Annex A - Normative References
Annex B - Abbreviations and Definitions
Describes the Common Requirements for the provision, design, fitting out and inspection of galleys and associated spaces.
DevelopmentNote |
Supersedes DEFSTAN 02-121(PT1)/2(2006). (12/2010) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2016)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DEFSTAN 02-121(PT2)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 2: SPECIFIC REQUIREMENTS FOR HM SURFACE SHIPS |
DEFSTAN 02-121(PT4)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 4: SPECIFIC REQUIREMENTS FOR NUCLEAR SUBMARINES |
DEFSTAN 02-106(PT3)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL REQUIREMENTS FOR MEDICAL & DENTAL SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - MEDICAL ORGANIZATION FOR ACTION IN HM SURFACE SHIPS |
DEFSTAN 02-126(PT1)/3(2010) : 2010 | REQUIREMENTS FOR STORES COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 00-35(PT4)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS |
DEFSTAN 08-144/2(2001) : 2001 AMD 1 2003 | MATERIAL REQUIREMENTS FOR THE NBC DEFENCE OF HM SURFACE SHIPS INCLUDING RFA - CATEGORY 1 |
BS EN 631-1:1993 | Materials and articles in contact with foodstuffs. Catering containers Specification for dimensions of containers |
DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
DEFSTAN 00-35(PT5)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 5: INDUCED MECHANICAL ENVIRONMENTS |
BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
DEFSTAN 07-226/3(2004) : 2004 | REQUIREMENTS FOR ELECTRICAL TESTING OF EQUIPMENT |
DEFSTAN 00-35(PT1)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 1: CONTROL AND MANAGEMENT |
DEFSTAN 02-723/1(2000) : 2000 | REQUIREMENTS FOR MARKER PLATES |
DEFSTAN 07-204(PT1)/1(2000) : 2000 | THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 1: POLICY FOR SURFACE SHIPS |
DEFSTAN 02-105(PT3)/3(2010) : 2010 | REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - SUBMARINES |
BS EN 10095:1999 | Heat resisting steels and nickel alloys |
BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
DEFSTAN 08-118(PT1)/1(2000) : 2000 | DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
BS EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
DEFSTAN 02-121(PT2)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 2: SPECIFIC REQUIREMENTS FOR HM SURFACE SHIPS |
DEFSTAN 02-121(PT4)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 4: SPECIFIC REQUIREMENTS FOR NUCLEAR SUBMARINES |
BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
DEFSTAN 02-719/1(2000) : 2000 | SEA WATER SYSTEMS FOR HM SURFACE SHIPS CATEGORY 2 |
DEFSTAN 02-111/2(2001) : 2001 | REQUIREMENTS FOR THE CONSTRUCTION, FITTING OUT AND TESTING OF REFRIGERATION SPACES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-720/2(2002) : 2002 | WASTE DISPOSAL POLICY |
DEFSTAN 00-35(PT3)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
DEFSTAN 02-862(PT1)/2(2007) : 2007 | FASTENERS - PART 1: GENERAL |
DEFSTAN 02-105(PT1)/3(2010) : 2010 | REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 02-703/1(2000) : 2000 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
BS EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
DEFSTAN 02-105(PT2)/3(2010) : 2010 | REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS HM SURFACE SHIPS |
DEFSTAN 02-126(PT2)/2(2004) : 2004 | REQUIREMENTS FOR STORES COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - HM SURFACE SHIPS |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS EN 485-3:2003 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
DEFSTAN 02-126(PT3)/2(2004) : 2004 | REQUIREMENTS FOR STORES COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - HM SUBMARINES |
DEFSTAN 02-587(PT2)/1(2000) : 2000 | REQUIREMENTS FOR LIGHTING SYSTEMS - PART 2: SUBMARINES CATEGORY 3 |
BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
DEFSTAN 08-103(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - CATEGORY 2 - PART 2: REQUIREMENTS FOR SUBMARINES |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DEFSTAN 08-204(PT3)/1(2010) : 2010 | REQUIREMENTS FOR DAMAGE CONTROL AND FIRE PROTECTION FOR THE SAFETY OF HM SURFACE SHIPS AND SUBMARINES - PART 3: HM SURFACE SHIPS AND SUBMARINE EQUIPMENT |
DEFSTAN 02-538/1(2000) : 2000 | GUIDE TO THE SELECTION OF SMALL ELECTRICAL FITTINGS AND COMPONENTS CATEGORY 2 |
DEFSTAN 02-102(PT1)/3(2005) : 2005 | REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
DEFSTAN 02-587(PT1)/3(2008) : 2008 | REQUIREMENTS FOR LIGHTING SYSTEMS - PART 1: SURFACE SHIPS |
BS EN 14411:2012 | Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking |
DEFSTAN 08-159(PT2)/1(2001) : 2001 | REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 2: HM SUBMARINES |
DEFSTAN 02-122/1(2002) : INTERIM | REQUIREMENTS FOR CATERING EQUIPMENT |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.