DEFSTAN 02-128/2(2008) : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS
Hardcopy , PDF
08-14-2013
English
01-01-2008
Foreword
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 Modular Furniture
6 Design
7 Material
8 Manufacture
8.1 Techniques
8.2 Jointing
8.3 Forming
8.4 Clearances and Tolerances
8.5 Assembly
8.6 Carcass
8.7 Drawers
8.8 Doors and Flaps
8.9 Catches
8.10 Hinges
8.11 Locks
8.12 Stainless Steel Items
8.13 Moulded Units
8.14 Moulded Inserts
8.15 Commercial Units
9 Finish
9.1 Preparation and Painting
9.2 Rivets
9.3 Sub-assemblies
9.4 Doors and Flaps
9.5 GRP Units
10 Modular Furniture
11 Modular Furniture - Submarines
12 Modular Furniture - Medical and Dental Compartments
13 Security Boxes
14 Operators Chair
15 Equipment Associated with Modular Range Furniture
Annex A - Related Documents
Defines the requirement for modular furniture, security boxes, operators chairs and associated equipment for accommodation and medical areas in HM Surface Ships and Submarines and when specified in the contract for RFAs, RMAS craft, and other vessels where appropriate.
| DevelopmentNote |
Supersedes DEFSTAN 02-128/1(2000). (05/2008) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
126
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 02-106(PT1)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL & DENTAL FACILITIES |
| DEFSTAN 02-105(PT1)/3(2010) : 2010 | REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 02-106(PT2)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - MEDICAL AND DENTAL FACILITIES IN HM SURFACE SHIPS |
| DEFSTAN 02-106(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - MEDICAL AND DENTAL FACILITIES IN HM SURFACE SHIPS |
| BS EN 12020-2:2016 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Tolerances on dimensions and form |
| DEFSTAN 07-247(PT5)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 5: PAINTS |
| BS EN 14118-1:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Designation |
| DEFSTAN 02-129/2(2007) : 2007 | REQUIREMENTS FOR SOFT FURNISHINGS AND UPHOLSTERY FABRICS |
| BS EN 755-4:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Square bars, tolerances on dimensions and form |
| BS EN 755-8:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Porthole tubes, tolerances on dimensions and form |
| DEFSTAN 02-701(PT3)/2(2004) : 2004 | GLASS REINFORCED PLASTIC (GRP) MOULDINGS - PART 3: A GUIDE TO VARIOUS TESTS AND TESTING METHODS FOR THE EVALUATION OF THE QUALITY OF GRP MOULDINGS |
| DEFSTAN 02-106(PT3)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - MEDICAL ORGANISATION FOR ACTION IN HM SURFACE SHIPS |
| BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
| DEFSTAN 02-106(PT1)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL AND DENTAL FACILITIES |
| BS EN 14118-3:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements |
| DEFSTAN 07-247(PT4)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 4: HABITABILITY MATERIALS |
| DEFSTAN 07-247(PT8)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 8: FIRE CHARACTERISTICS DATABASE |
| BS EN 755-7:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Seamless tubes, tolerances on dimensions and form |
| BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
| DEFSTAN 02-701(PT1)/2(2005) : 2005 | GLASS REINFORCED PLASTIC (GRP) MOULDINGS - PART 1: A GUIDE TO METHODS FOR THE PRODUCTION OF HAND LAID-UP GRP MOULDINGS |
| BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
| BS EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
| BS EN 10250-4:2000 | Open steel die forgings for general engineering purposes Stainless steels |
| BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
| BS EN 14118-2:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
| DEFSTAN 07-247(PT7)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 7: MISCELLANEOUS MATERIALS |
| BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10087:1999 | Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods |
| BS EN 755-6:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Hexagonal bars, tolerances on dimensions and form |
| DEFSTAN 02-188/1(2000) : 2000 | REQUIREMENTS FOR THE PROCUREMENT, STORAGE AND USE OF TIMBER |
| DEFSTAN 07-247(PT3)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 3: SYSTEM MATERIALS |
| DEFSTAN 02-184/1(2000) : 2000 | REQUIREMENTS FOR MASTER DECOR SCHEME OF ACCOMMODATION AREAS IN SURFACE SHIPS AND SUBMARINES |
| BS EN 755-9:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Profiles, tolerances on dimensions and form |
| BS EN 12844 : 1999 | ZINC AND ZINC ALLOYS - CASTINGS - SPECIFICATIONS |
| DEFSTAN 02-137/2(2007) : 2007 | REQUIREMENTS FOR FOAM COMPONENTS FOR CUSHIONS AND UPHOLSTERY |
| DEFSTAN 02-107/2(2002) : 2002 | REQUIREMENTS FOR ACCOMMODATION IN HM SURFACE WARSHIPS AND SUBMARINES - CATEGORY 2 |
| BS 1449-1.1:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification |
| DEFSTAN 07-247(PT6)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 6: INSULANTS |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS EN 485-3:2003 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
| DEFSTAN 02-106(PT4)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 4: MEDICAL AND DENTAL FACILITIES IN SUBMARINES |
| BS EN 755-3:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Round bars, tolerances on dimensions and form |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS 1155:2003 | Natural rubber compounds for extrusion. Specification |
| BS EN 755-2:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| DEFSTAN 07-247(PT2)/2(2006) : 2006 | SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 2: STRUCTURAL MATERIALS |
| BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| DEFSTAN 07-269/1(2000) : 2000 | PLYWOOD FOR NAVAL REQUIREMENTS - CATEGORY 3 |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DEFSTAN 02-701(PT2)/2(2006) : 2006 | GLASS REINFORCED PLASTIC (GRP) MOULDINGS - PART 2: QUALITY CONTROL INSPECTION PROCEDURE AND ACCEPTANCE PROCEDURES FOR GRP MOULDINGS |
| DEFSTAN 07-247(PT1)/2(2006) : 2006 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.