DEFSTAN 02-360/2(2001) : 2001

Name: DEFSTAN 02-360/2(2001) : 2001
Brand: DEFSTAN

Withdrawn

GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES

Withdrawn date

07-23-2013

Published date

01-12-2013

Publisher

UK Ministry of Defence Standards

TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
Categories of Naval Defence Standards
Related Documents
Health and Safety
Additional Information
CONTENTS
SECTION 1 - PERFORMANCE SPECIFICATION
            1.1 General Requirements
SECTION 2 - NATIONAL/INTERNATIONAL REGULATIONS
SECTION 3 - MILITARY STANDARDS/REQUIREMENTS
SECTION 4 - DESIGN REQUIREMENTS/GUIDANCE
            4.1 Selection of Fluid System Valves
                 4.1.1 ON/OFF Valves Ball and Plug
                 4.1.2 ON/OFF Valves Butterfly
                 4.1.3 ON/OFF Valves Screw Down and Diaphragm
                 4.1.4 Throttling Valves
                 4.1.5 Non-Return Valves
            4.2 Actuators
            4.3 Ball Valves
            4.4 Butterfly Valves
            4.5 Constant Flow Valves
            4.6 Diaphragm Valves
            4.7 Domestic Taps, Mixing Valves, etc
            4.8 Air Eliminators
            4.9 Hydrant Valves
            4.10 Non-Return Valves
            4.11 Plug Valves
            4.12 Screw Down Valves
            4.13 Relief Valves
            4.14 Reducing Valves
            4.15 Surplus Valves
            4.16 Halon System Valves and Actuators
SECTION 5 - CORPORATE EXPERIENCE AND KNOWLEDGE
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS AND DEFINITIONS
ANNEX C - PROCUREMENT CHECK LIST
ANNEX D - LIST OF MANUFACTURERS
ALPHABETICAL INDEX

Contains guidance on the valves that may be used in hull, machinery and weapons systems in HM Surface Ships and lists a range of valves and actuators from which selection may be made.

DevelopmentNote	Supersedes DEFSTAN 02-360/1(2000) (07/2003) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (04/2013)
DocumentType	Standard
PublisherName	UK Ministry of Defence Standards
Status	Withdrawn
Supersedes	DEFSTAN 02-360/1(2000) : 2000

DEFSTAN 02-319/3(2009) : 2009	REQUIREMENTS FOR AVIATION FUEL SYSTEMS IN HM SURFACE SHIPS
DEFSTAN 02-319/4(2014) : 2014	REQUIREMENTS FOR AVIATION FUEL SYSTEMS IN HM SHIPS
DEFSTAN 02-330/2(2007) : 2007	REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES
DEFSTAN 02-314/3(2005) : 2005	COMPRESSED AIR SYSTEMS
DEFSTAN 02-123(PT1)/3(2015) : 2015	REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 1: LAUNDRIES AND ASSOCIATED COMPARTMENTS
DEFSTAN 00-101(PT2)/1(2005) : 2005	DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES
DEFSTAN 02-330/3(2013) : 2013	REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES
DEFSTAN 02-877/2(2009) : 2009	REQUIREMENTS FOR FINE WATER SPRAY FIREFIGHTING SYSTEMS FOR MAIN AND AUXILIARY MACHINERY SPACES ON SURFACE SHIPS
DEFSTAN 02-320/3(2009) : 2009	REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-323/3(2009) : 2009	REQUIREMENTS FOR CENTRIFUGES
DEFSTAN 02-102(PT1)/3(2005) : 2005	REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES
DEFSTAN 02-329/2(2005) : 2005	REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-348/2(2008) : 2008	GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK
DEFSTAN 02-329/3(2010) : 2010	REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-121(PT1)/2(2006) : 2006	REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS
DEFSTAN 02-797(PT1)/3(2009) : 2009	PIPEWORK ENGINEERING - PART 1: GENERAL
DEFSTAN 00-101(PT1)/1(2005) : 2005	DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 1: SURFACE SHIPS
DEFSTAN 02-329/4(2015) : 2015	REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 00-101(PT1)/2(2008) : 2008	DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 1: SURFACE SHIPS
DEFSTAN 02-375/2(2017) : 2017	VALVE DESIGN AND MANUFACTURE
DEFSTAN 02-320/4(2015) : 2015	REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-339/3(2006) : 2006	REQUIREMENTS FOR STEERING AND STABILIZER SYSTEMS FOR HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES
DEFSTAN 02-728/3(2010) : 2010	REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS
DEFSTAN 02-315/3(2005) : 2005	AIR COMPRESSORS
DEFSTAN 02-303/2(2010) : 2010	LUBRICATION OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-775/3(2010) : 2010	REQUIREMENTS FOR GASOLINE SYSTEMS AND STOWAGES IN HM SURFACE SHIPS
DEFSTAN 02-322/3(2010) : 2010	OIL AND BILGE WATER SHIPBOARD PROCESSING ARRANGEMENTS
DEFSTAN 00-101(PT2)/2(2008) : 2008	DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES
DEFSTAN 02-303/3(2015) : 2015	LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES
DEFSTAN 02-877/1(2006) : 2006	REQUIREMENTS FOR FINE WATER SPRAY FIREFIGHTING SYSTEMS FOR MAIN AND AUXILIARY MACHINERY SPACES ON SURFACE SHIPS
DEFSTAN 02-775/4(2017) : 2017	REQUIREMENTS FOR GASOLINE SYSTEMS AND STOWAGES IN HM SURFACE SHIPS

NES 745 PT 1 : ISSUE 1	CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR CASTING - COPPER AND NICKEL ALLOY CASTINGS
NES 830 PT 1 : ISSUE 2	REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS - GUNMETAL SAND CASTINGS AND INGOT CLASS 3 CASTING ONLY
NES 747 PT 3 : ISSUE 3	NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE (COMMERCIAL ALLOY) SAND CASTINGS AND INGOTS
NES 359 : ISSUE 2	STANDARD VALVES - IMPERIAL
BS 1490:1988	Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes
NES 745 PT 2 : ISSUE 1	CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR CASTING - STEEL CASTINGS
NES 833 PT 2 : ISSUE 2/1	REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - FORGINGS, FORGING STOCK, RODS AND SECTIONS
NES 747 PT 2 : ISSUE 3	NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE (NAVAL ALLOY) SAND CASTINGS AND INGOTS
NES 834 PT 2 : ISSUE 2	REQUIREMENTS FOR ALUMINIUM SILICON BRONZE - FORGINGS, FORGING STOCK, RODS AND SECTIONS
BS 6755-2:1987	Testing of valves Specification for fire type-testing requirements