DEFSTAN 02-900(PT3)/1(2013) : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-05-2013
English
01-01-2013
Foreword
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
Specifies users with the information that defines Goals, Requirements and Solutions relating to Ship Systems.
DevelopmentNote |
Supersedes DEFSTAN 02-128/2(2008), DEFSTAN 02-129/2(2007) and DEFSTAN 02-876/1(2011). Partially superseded 02-130/2(2012), DEFSTAN 02-137/2(2007) and DEFSTAN 02-165/2(2010). (08/2013)
|
DocumentType |
Standard
|
Pages |
66
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS EN 12020-2:2016 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Tolerances on dimensions and form |
DEFSTAN 83-48/4(2003) : 2003 | CLOTHS, PLAIN WEAVE, COTTON |
BS EN 438-5:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
BS EN 14118-1:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Designation |
BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
BS EN 755-4:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Square bars, tolerances on dimensions and form |
BS EN 755-8:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Porthole tubes, tolerances on dimensions and form |
BS EN 1773:1997 | Textiles. Fabrics. Determination of width and length |
BS EN ISO 12945-1:2001 | Textiles. Determination of fabric propensity to surface fuzzing and to pilling Pilling box method |
BS EN ISO 105-E04:2013 | Textiles. Tests for colour fastness Colour fastness to perspiration |
BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
BS EN 438-3:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
BS EN ISO 105-B02:2014 | Textiles. Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test |
BS EN 14118-3:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements |
BS EN 14976:2005 | Textiles. Mattress tickings. Specification and test methods |
BS EN 14465:2003 | Textiles. Upholstery fabrics. Specification and methods of test |
BS EN ISO 4589-3:2017 | Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test |
IMO IE110 : 2009 | SOLAS (CONSOLIDATED EDITION) |
BS EN ISO 105-X12:2016 | Textiles. Tests for colour fastness Colour fastness to rubbing |
BS EN 25077:1994 | Textiles. Determination of dimensional change in washing and drying |
DEFSTAN 81-41(PT1)/7(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
BS EN 755-7:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Seamless tubes, tolerances on dimensions and form |
BS EN 438-1:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Introduction and general information |
BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
BS 5852:2006 | Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources |
BS EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
BS EN 10250-4:2000 | Open steel die forgings for general engineering purposes Stainless steels |
BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
BS EN 14118-2:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
BS EN ISO 105-D02:1996 | Textiles. Tests for colour fastness Colour fastness to rubbing: Organic solvents |
DEFSTAN 02-711/3(2012) : 2012 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
BS 3878:1982 | Specification for flexible PVC sheeting for hospital use |
BS 5651:1978 | Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies |
BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
BS EN 10087:1999 | Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods |
BS EN 755-6:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Hexagonal bars, tolerances on dimensions and form |
DEFSTAN 02-188/1(2000) : 2000 | REQUIREMENTS FOR THE PROCUREMENT, STORAGE AND USE OF TIMBER |
BS EN ISO 105-D01:2010 | Textiles. Tests for colour fastness Colour fastness to dry cleaning using perchloroethylene solvent |
DEFSTAN 02-120/2(2002) : INTERIM | REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-184/1(2000) : 2000 | REQUIREMENTS FOR MASTER DECOR SCHEME OF ACCOMMODATION AREAS IN SURFACE SHIPS AND SUBMARINES |
BS EN 755-9:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Profiles, tolerances on dimensions and form |
BS EN 12844 : 1999 | ZINC AND ZINC ALLOYS - CASTINGS - SPECIFICATIONS |
BS 1449-1.1:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification |
BS 5438:1989 | Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens |
BS EN 12590:2000 | Textiles. Industrial sewing threads made wholly or partly form synthetic fibres |
BS EN ISO 12947-2:2016 | Textiles. Determination of the abrasion resistance of fabrics by the Martindale method Determination of specimen breakdown |
BS EN ISO 13936-3:2007 | Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Needle clamp method |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS EN 485-3:2003 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
BS EN ISO 3582:2001 | Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
BS EN ISO 6330:2012 | Textiles. Domestic washing and drying procedures for textile testing |
BS EN ISO 13936-2:2004 | Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Fixed load method |
BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
BS 3379(2005) : 2005 | COMBUSTION MODIFIED FLEXIBLE POLYURETHANE CELLULAR MATERIALS FOR LOADBEARING APPLICATIONS - SPECIFICATION |
BS EN 755-3:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Round bars, tolerances on dimensions and form |
BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
BS 1155:2003 | Natural rubber compounds for extrusion. Specification |
BS EN 755-2:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
BS EN ISO 105-C06:2010 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering |
BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
BS 1425-1:1991 | Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles Specification for fillings and stuffings other than feather and/or down |
DEFSTAN 07-269/1(2000) : 2000 | PLYWOOD FOR NAVAL REQUIREMENTS - CATEGORY 3 |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
DEFSTAN 02-713/3(2012) : 2012 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
BS 1625-6 & 4830(1972) : 1972 | SPECIFICATIONS FOR WOVEN COTTON TAPES, LIGHT, MEDIUM AND HEAVY QUALITIES |
BS 4881:1993 | Specification for polypropylene film cords, lines and twines |
BS EN ISO 13934-1:2013 | Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method |
BS EN 13780:2003 | Touch and close fasteners. Determination of longitudinal shear strength |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.